e.Blue
Max Output Level: -77 dBFS
- Total Posts : 693
- Joined: 2004/01/04 20:54:51
- Location: Austin,TX
- Status: offline
Anyone using JBridge with SONAR X2?
I have not been able to use JBridge successfully with X2. All of the GUIs are completely blank when the effects/instruments loads. Of course, this make them unusable. Is anyone else seeing anything similar to this with JBridge?
-e.B
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/29 20:30:38
(permalink)
I dont use Jbridge here but just wondering if you've installed the X2 quickfix. It seems to have fixed some problems with blank modules and missing GUI elements.
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
musicroom
Max Output Level: -51 dBFS
- Total Posts : 2421
- Joined: 2004/04/26 22:31:02
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/29 21:04:20
(permalink)
Watching this thread. I was thinking of purchasing jbridge this week.
Dave Songs___________________________________ Desktop: Platinum / RME Multiface II / Purrfect Audio DAW I7-3770 / 16 GB RAM / Win 10 Pro / Remote Laptop i7 6500U / 12GB RAM / RME Babyface
|
Phonic
Max Output Level: -85 dBFS
- Total Posts : 291
- Joined: 2011/04/04 13:13:38
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/29 21:17:15
(permalink)
I have been using Jbridge in X2 without any trouble whatsoever - I did not have to touch any settings to make it work when upgrading from X1 to X2.
i7 4770k @ 3.5 Ghz 24 GB DDR 3 Windows 7 64 bit Sonar Platinum Foxboro 64 bit MOTU 828 MK3 UAD-2 Quad
|
Brando
Max Output Level: -47.5 dBFS
- Total Posts : 2776
- Joined: 2003/11/06 11:47:20
- Location: Canada
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/29 21:37:35
(permalink)
Phonic
I have been using Jbridge in X2 without any trouble whatsoever - I did not have to touch any settings to make it work when upgrading from X1 to X2.
My experience too. Mostly use Bitbridge without trouble. But jbridge works fine for the plugs I use it for.
Brando
Cakewalk, Studio One Pro, Reaper Presonus Audiobox 1818VSL ASUS Prime Z370-A LGA1151, 32GB DDR4, Intel 8700K i7, 500 GB SSD, 3 x 1TB HDD, Windows 10 Pro 64
|
panup
Max Output Level: -50 dBFS
- Total Posts : 2538
- Joined: 2006/05/23 09:34:35
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/29 22:09:51
(permalink)
X2 and JBridge work great here.
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/30 02:35:42
(permalink)
Works great here, IMHO better than bitbridge. Try checking the "Force GUI refresh" option.
I don't have that checked but I guess there are some configs of graphic cards etc that do require it.
|
TabSel
Max Output Level: -85 dBFS
- Total Posts : 284
- Joined: 2011/02/15 04:32:33
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/30 08:06:07
(permalink)
make sure jBridge is running with admin privileges. See jBridge documentation.
|
STinGA
Max Output Level: -79 dBFS
- Total Posts : 552
- Joined: 2005/11/06 14:51:38
- Location: Andover, UK
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/30 08:18:11
(permalink)
Just reinstalled jbridge and it just white screened me with an Ampeg VST error.
I so wish they would make an x64 version, it seems to like neither bit bridge or jbridge on my machine. YMMV.
Win 8 x64 Sonar X3b Producer X64 Edirol UA-101 BCF2000 A-Pro 500 Roland TD-6KV
|
TabSel
Max Output Level: -85 dBFS
- Total Posts : 284
- Joined: 2011/02/15 04:32:33
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/30 09:10:14
(permalink)
contact the developer. He usually comes back to you within minutes.
|
e.Blue
Max Output Level: -77 dBFS
- Total Posts : 693
- Joined: 2004/01/04 20:54:51
- Location: Austin,TX
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/30 10:37:11
(permalink)
Looks like I have some more troubleshooting to do. I suspect my video card drivers. I've also been seeing other graphics weirdness in SONAR since installing an NVidia card.
Thanks for the suggestions folks.
-e.B
|
Brando
Max Output Level: -47.5 dBFS
- Total Posts : 2776
- Joined: 2003/11/06 11:47:20
- Location: Canada
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2012/10/30 11:11:24
(permalink)
e.Blue
Looks like I have some more troubleshooting to do. I suspect my video card drivers. I've also been seeing other graphics weirdness in SONAR since installing an NVidia card.
Thanks for the suggestions folks.
-e.B
I used to use JBridge for Jamstix, Phatmatik Pro, and Vocalizer - which always gave Bitbridge trouble. I haven't switched to the x64 version of Jamstix yet, and Phatpro and Vocalizer are unlikely to ever get an x64 update, IMO. I just took a look - at least since X2 came out, I have been running both Jamstix and Phatpro in Bitbridge, and Vocalizer in JBridge, but with no special settings (Sluggish GUI Hack, Force Whole GUI refresh, etc). I lost a hard drive, and cleaned up my system and upgraded from Vista to Win 7 just before X2 came out. The few other 32 bit plugs I am still running seem to work fine for me in Bitbridge. FWIW, I am using JBridge 1.5. Not sure if there is a more recent version. Hope this helps -
Brando
Cakewalk, Studio One Pro, Reaper Presonus Audiobox 1818VSL ASUS Prime Z370-A LGA1151, 32GB DDR4, Intel 8700K i7, 500 GB SSD, 3 x 1TB HDD, Windows 10 Pro 64
|
Moderato Maestoso
Max Output Level: -90 dBFS
- Total Posts : 24
- Joined: 2011/07/18 06:28:05
- Location: London, UK and Uzès, France
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2014/02/04 08:52:16
(permalink)
Thanks folks! My question is specifically if I have to run the jBridger application and create bridged versions of my x86 plugins (to run in Sonar x64) before using them in Sonar, or if that process is transparent within Sonar once you check the checkbox to use jBridge for that plugin.
Cheers,
Martin
Moderato Maestoso - Creative Music & Technology http://www.moderatomaestoso.com Composition, Musical Supervision, Orchestration & Arranging, Keyboard & Music Programming, Audio Software & Hardware Development, and Music Technology Consulting
|
emwhy
Max Output Level: -62 dBFS
- Total Posts : 1402
- Joined: 2006/01/03 15:09:02
- Status: offline
Re:Anyone using JBridge with SONAR X2?
2014/02/04 09:20:43
(permalink)
I've actually done both methods. Some of my older WAVES stuff would not load properly when just using jBridge option checked off in SONAR's plug-in properties menu. What I did was create a folder in the x64 vst category and then ran the jBridge application and had it deposit the wrapped vsts there. Things went without a hitch. As for the graphics issue, before testing things further, turn off Aero and see if that clears things up first.
|