titetrax
Max Output Level: -90 dBFS
- Total Posts : 33
- Joined: 2011/01/16 04:03:52
- Location: San Diego, California, USA
- Status: offline
Issues installing X2 Prod over X1 Expn?
Hey y'all. I have X1 Expanded already installed and I'm thinking about installing X2 Prod. Would I uninstall X1 Expn first or just go ahead and install X2 Prod? If I did the latter, what would happen? Would the install create a new folder for X2 while leaving everything else in the Cakewalk folder alone or what? What would happen to my Z3TA +2 in EITHER scenario? I currently have Dimension Pro 1.2.0.214 and RaptureLE 1.22 installed. Does the X2 Prod install overwrite them or what? What versions of Dimension Pro and Rapture come with X2 Prod? I know it's discontinued, but will Beatscape work in X2 Prod if I have the files and they're in the right place? Thanks for your valued opinions and assistance.
SONAR X2a Producer - SONAR X3d Producer - Windows 7 Ultimate 64 SP1 - Intel i7-2600K @3.40GHz CPU - Asus P8Z68-V PRO Mobo - 16GB Corsair Vengeance DDR3 1866MHz RAM - EVGA nVidia GeForce GTX 460 1024MB - Zalman CNPS9500 AT Cpu Fan - Antec HCG-900 PSU - (1)Corsair Force 3 120GB SSD - (2)WD Caviar Black 500GB HDD - (1) Seagate Barracuda 2TB HDD - (1)Seagate FreeAgent 1.5TB Ext.HDD - Focusrite Scarlett 6i6 audio interface - M-Audio KeyStudio47 MIDI Controller - Yamaha P-105 Digital Piano (when I need weighted keys)
|
jb101
Max Output Level: -46 dBFS
- Total Posts : 2946
- Joined: 2011/12/04 05:26:10
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/02 19:41:11
(permalink)
I've not had any problems here, they're in two separate folders. Don't bother uninstalling X1. Beatscape is not included in X2, but the content is. Beatscape still shows up in my X2 as X2 still scans its folder location. You can choose whether to install Dim Pro. Everything here works fine. All my preferences were migrated from X1 to X2. I hope you love it as much as I've been doing.
|
titetrax
Max Output Level: -90 dBFS
- Total Posts : 33
- Joined: 2011/01/16 04:03:52
- Location: San Diego, California, USA
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/02 20:35:30
(permalink)
Thanks for the quick response, jb101! Did the X2 install replace your Rapture LE folder with a "complete edition" Rapture folder or does it still say LE? I'm also interested in whether the info in the "Shared DXi", "Shared Plugins", "Shared Utilities", and "Vstplugins" folders from your X1 Expn install was replaced with UPDATED X2 files or what? Thanks again.
SONAR X2a Producer - SONAR X3d Producer - Windows 7 Ultimate 64 SP1 - Intel i7-2600K @3.40GHz CPU - Asus P8Z68-V PRO Mobo - 16GB Corsair Vengeance DDR3 1866MHz RAM - EVGA nVidia GeForce GTX 460 1024MB - Zalman CNPS9500 AT Cpu Fan - Antec HCG-900 PSU - (1)Corsair Force 3 120GB SSD - (2)WD Caviar Black 500GB HDD - (1) Seagate Barracuda 2TB HDD - (1)Seagate FreeAgent 1.5TB Ext.HDD - Focusrite Scarlett 6i6 audio interface - M-Audio KeyStudio47 MIDI Controller - Yamaha P-105 Digital Piano (when I need weighted keys)
|
kevo
Max Output Level: -70 dBFS
- Total Posts : 1038
- Joined: 2005/06/28 15:04:27
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/02 22:54:47
(permalink)
When you install Sonar X2 it will install in it's own folder. However, many folders are shared folders and the installation will update those files. There is *never* a reason to uninstall a previous version of Sonar. There is nothing to gain by doing so. You only recover a few megs of HD space. Rapture will install in it's own folder so you will have 2 versions installed. You will have the LE version and the Full version. Dimension Pro is where it get's ticklish. Dimension Pro 1.5 does not support DXi and will uninstall the DXi version. This means if you have any projects that use Dim Pro you will have to reinsert Dim Pro and reselect your patches.
Intel BOXDZ77BH-55K Intel 7 Series Motherboard - Intel Core i5-3570K - 8GB Patriot G2 Series PC3-12800, DDR3 1600MHz - Seagate ST1000DM003 Barracuda 1TB Hard Drive - 7200RPM, 64MB, SATA 6Gb/s - Microsoft Windows 7 Home Premium 64 - Sonar Plat - Not Overclocked
|
Splat
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/02 22:59:41
(permalink)
Always back up before upgrading.
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/03 09:07:47
(permalink)
The "Shared DXi", "Shared Plugins", "Shared Utilities", and "Vstplugins" folders will all be updated by X2.
Skip the DimPro install, it is the same version that came with X1.
The loops that came with Beatscape are duplicated in the "Loop and One-Shots" installers. You can safely delete the old "Beatscape Factory Content" directory and replace it with a junction to the "Cakwalk Content/Audio Library/Loops" if you wish to get back 4GB of disk space.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 03:54:23
(permalink)
Skip the DimPro install, it is the same version that came with X1 scook, he said he's running version 1.22 of DP - the current version is 1.5, so he'll probably want to update his installation
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 09:38:46
(permalink)
Good catch on the version. Rather that go throug the install process, I would run the 1.5 patch from the support page. There is nothing to be gained by disturbing the DimPro patches and samples. No new patches in the base version between 1.2 and 1.5. There will be some duplication of samples because of the move to flac from wav.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 09:45:08
(permalink)
One more ting about updating to DimPro 1.5. That may be an issue if there is a need to go back to old projects using the DimPro DXi. DXi support was dropped in 1.5.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 10:53:59
(permalink)
Yes - this has bitten me on several projects. Luckily, I always make a note of which patches I was using in a song.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
titetrax
Max Output Level: -90 dBFS
- Total Posts : 33
- Joined: 2011/01/16 04:03:52
- Location: San Diego, California, USA
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 12:43:42
(permalink)
Thanks so much for the quick responses, family! This is one of the most AWESOME forums on the Internet!! I started doing audio/midi music production back in 1992. My Dad was teaching at San Diego City College and I went to visit him one day(probably to borrow some money  ). I walked by a classroom and saw a bunch of Roland U-220 keyboards with Macintosh computers "somehow" hooked up to each other. The software was Opcode's Vision(with the BEST midi implementation I've ever come across!) and I fell in love at first sight. In 2005, I got a deal on a pc computer and bought it even though I had a Mac G4 at the time. When Mac went from Os 9 to 10, I could no longer use Vision. I panicked at first, but somewhere along the way, it became easier to get plugins for the PC platform anyway, so I switched. I tried Cubase on the PC with a Event Gina but I kept getting pops and crackels. I then tried Sonar, had no issues, and have been with Sonar ever since. I really see no reason to have multiple versions of Sonar on my computer because I'll ONLY use the latest one and I'm kinda anal about redundant or unnecessary files. Are there any issues with uninstalling X1 and then installing X2? Seems like my Beatscape should still work. What do you think? On my current computer, when I installed X1, I had to do some tweaking with DimPro to get it to work because I was getting that error. So I'm really just wanting to reinstall it just to "clean" everything up since they've fixed the error. What do you think? Smart move to list patch names, Bristol_Jonesey! I will backup first no matter what I decide to do, CakeAlexS! Thanks again, fam.
SONAR X2a Producer - SONAR X3d Producer - Windows 7 Ultimate 64 SP1 - Intel i7-2600K @3.40GHz CPU - Asus P8Z68-V PRO Mobo - 16GB Corsair Vengeance DDR3 1866MHz RAM - EVGA nVidia GeForce GTX 460 1024MB - Zalman CNPS9500 AT Cpu Fan - Antec HCG-900 PSU - (1)Corsair Force 3 120GB SSD - (2)WD Caviar Black 500GB HDD - (1) Seagate Barracuda 2TB HDD - (1)Seagate FreeAgent 1.5TB Ext.HDD - Focusrite Scarlett 6i6 audio interface - M-Audio KeyStudio47 MIDI Controller - Yamaha P-105 Digital Piano (when I need weighted keys)
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 15:02:49
(permalink)
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
titetrax
Max Output Level: -90 dBFS
- Total Posts : 33
- Joined: 2011/01/16 04:03:52
- Location: San Diego, California, USA
- Status: offline
Re:Issues installing X2 Prod over X1 Expn?
2012/12/04 16:21:27
(permalink)
Thanks, Bristol_Jonesey. I'm always amazed at how some of you guys find the right posts as easily as you do. I must be doing something wrong when I use the search because I usually can't find what I'm looking for here, although I rarely have issues using typical Boolean searching engines elsewhere. I am very familiar with deleting registry keys and I usually perform an even more exhaustive search for ANY files related to the app I'm attempting to get rid of. But I will follow the directions in these links because I might not want to delete everything if I still want Beatscape to work. I'm also really hoping that nothing happens to my Z3TA +2.1 when I uninstall X1 Prod Suite. I haven't used it much yet but I was going to initiate a "Better Use & Practices" pledge for my business this newcoming year. Part of this pledge states that I will make better use of the things(loops, sounds, effect plugins, softsynths, etc.) that I ALREADY have instead of looking for new stuff. Anyways, I've got piano lessons for the next 5 hours so I'll be back later. Thanks again.
SONAR X2a Producer - SONAR X3d Producer - Windows 7 Ultimate 64 SP1 - Intel i7-2600K @3.40GHz CPU - Asus P8Z68-V PRO Mobo - 16GB Corsair Vengeance DDR3 1866MHz RAM - EVGA nVidia GeForce GTX 460 1024MB - Zalman CNPS9500 AT Cpu Fan - Antec HCG-900 PSU - (1)Corsair Force 3 120GB SSD - (2)WD Caviar Black 500GB HDD - (1) Seagate Barracuda 2TB HDD - (1)Seagate FreeAgent 1.5TB Ext.HDD - Focusrite Scarlett 6i6 audio interface - M-Audio KeyStudio47 MIDI Controller - Yamaha P-105 Digital Piano (when I need weighted keys)
|