How to add gain to a single channel on a stereo WAV file

Author
Post
Essentials Only Full Version
DanAXSonar
Max Output Level: -90 dBFS
  • Total Posts : 2
  • Joined: 2012/12/03 11:00:47
  • Status: offline
2012/12/03 11:06:28 (permalink)

How to add gain to a single channel on a stereo WAV file

I recorded a stereo mix.  However, the gain on one channel seems to be lower than another channel.  Is there a way to increase gain on one channel so that both channel is at the same level?
#1

2 Replies Related Threads
    mikedocy
    Max Output Level: -67 dBFS
    • Total Posts : 1157
    • Joined: 2007/05/09 23:00:37
    • Location: Cleveland, Ohio
    • Status: offline
    Re:How to add gain to a single channel on a stereo WAV file 2012/12/03 11:10:58 (permalink)
    Turn the pan control in the direction of the lower channel. Turn just enough to balance left and right as observed on the meter.

    Then turn up the input gain control or volume slider to bring the level up on both left and right.


    Alternately you could do it with the "Channel Tools" plug-in by increasing the gain on the low channel only.

    #2
    DanAXSonar
    Max Output Level: -90 dBFS
    • Total Posts : 2
    • Joined: 2012/12/03 11:00:47
    • Status: offline
    Re:How to add gain to a single channel on a stereo WAV file 2012/12/03 11:20:42 (permalink)
    Thanks Mike.  I actually figured out by using Process->Apply Effect-->Audio Effect-->Then Righ Channel
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1