soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Sonar X2 Not responding after stopping playback
I have sonar X2 producer running on windows 7 home 64bit and when I go to play back songs it works fine, but as soon as I press stop it crashes and goes into program not responding. Anyone know how to fix it is driving me crazy.
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/07 22:01:24
(permalink)
Scratch that first response; I gather this is a new installation that has never worked properly...?
Do you have the 308 Quickfix installed? And what interface and driver mode are you running?
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/07 23:56:00
(permalink)
yea its a new install, 308 quickfix no not installed and i have a focusrite saffire for hardware and driver mode is mme 32 bit
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 00:07:59
(permalink)
and i just tried the quickfix didn't change anything
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 00:31:05
(permalink)
Make sure you are writing 24 bit files, not 32 bit. Preferences Files... something like that.
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 10:01:05
(permalink)
|
jimkleban
Max Output Level: -64 dBFS
- Total Posts : 1319
- Joined: 2008/11/09 09:42:45
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 10:15:23
(permalink)
Are any bit bridges running?
Jim
PS - I have found that the more 64bit plugs that I run and the fewer 32 bit plugs, the more stable X2 has become (and X1 for that matter).
The Lamb Laid Down on MIDI www.lldom.com Studio Cat Custom i7 with Thunderbolt (wonderful system built and configured by our own Jim R) Apollo Duo (via TB) UAD Quad UAD Duo WIN 8.1 x64 with 32 GB Ram 4 SSD for programs and sample libraries Splat (latest version)
|
garrigus
Max Output Level: 0 dBFS
- Total Posts : 8599
- Joined: 2003/11/05 17:23:21
- Location: www.garrigus.com
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 11:15:31
(permalink)
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 12:22:18
(permalink)
Is it an internal drive? Any chance the flush to the drive is causing a problem?
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 13:30:54
(permalink)
changed driver mode to asio same issue and tried wdm but wouldnt support playback
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 13:31:57
(permalink)
what do you mean by flushing the drive?
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 14:49:43
(permalink)
Are these projects that were NOT started in X2?
I have at least one project from X1 that does exactly the same thing.
Try loading the project in "safe mode"; hold down the shift key when opening the file.
IF these are X1 projects (or earlier) you have a "buggy" plugin.
Tom
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
SuperG
Max Output Level: -63 dBFS
- Total Posts : 1371
- Joined: 2012/10/19 16:09:18
- Location: Edgewood, NM
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 14:55:42
(permalink)
soulthief895
what do you mean by flushing the drive?
It's what you do with it when it's broken...  On Windows systems, this isn't something to be concerned about at all.
|
daveny5
Max Output Level: 0 dBFS
- Total Posts : 16934
- Joined: 2003/11/06 09:54:36
- Location: North Carolina
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 15:34:12
(permalink)
It could be a bad soundcard driver or you need to run a check on your disk drive. You didn't mention what sound card you're using.
Dave Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic. Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 16:02:59
(permalink)
happens with loading old projects or if i start a new one all is fine until i try and stop the audio
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 16:04:25
(permalink)
I am using a focusrite saffire usb interface for audio
|
chuckebaby
Max Output Level: 0 dBFS
- Total Posts : 13146
- Joined: 2011/01/04 14:55:28
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 16:15:59
(permalink)
have you gone to focusrite and downloaded the drivers for your audio interface ?
if not you need to rid your computer of the substiute windows put in its place and download the right driver.
it could be a buffer issue.if your buffers are to high/low it can make playback unstable.
plug in your focusrite,go to device manager,delete the driver,unplug the unit.re-boot (do not plug it back in)
get the updated driver from focusrite/install it.plug in your unit.
wait for it to accept the driver and open up sonar,you should be running that A.I. with asio only,not anything else.
i have the same unit the saffire 6 usb ?
works great.
Windows 8.1 X64 Sonar Platinum x64 Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GBFocusrite Saffire 18I8 - Mackie Control
|
Swiller
Max Output Level: -88 dBFS
- Total Posts : 110
- Joined: 2012/04/25 16:19:21
- Location: West Wales UK
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/08 17:27:41
(permalink)
I have a scarlett and it always freezes once you stop a track. Mine rarely crashes however. It just takes time to re establish itself. Once playback is stopped.
In short, I don't rate the focusrite drivers. These cards however, do sound extremely good so worth the money.
I have a high end pc and no crashes, but on a lesser system the crashes do occur.
I think it is probably down to he focusrite drivers or the way they react with x2. It is well worth trying switching off the 64 bit engine and setting everything to 16 bit. But in my experience , the focusrite cards do go into confused mode once playback is stopped. It did not happen with an maudio 2496 cheap and cheerful card, but could also be a sonarism.
I7 3700k 3.5-3.9ghz, 16gb 1600 ddr3, 240gb ssd sata3, 2tb sata 3 hd, 2gb gt640 nvidia graphics, win 7 he, sonar x2 prod, a500pro, jd800,the magnificent juno 106, virus c, basstation rack, mpx1, xv5050, maschine mikro 1.8 with massive, kontakt,reaktor, mc505 groovebox, tlaudio 5021, 01x, Scarlett 8i6, prs ce24, squire classic vibe 60s.... tele,strat,jazz bass, blues jr 3 navy vintage 30 edition, orange ad5, line 6 ld15 bass amp, akg condenser mic, krk rokit 5, ns10s. Lots of thatchers gold.
|
soulthief895
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/12/07 21:25:50
- Status: offline
Re:Sonar X2 Not responding after stopping playback
2012/12/09 00:14:21
(permalink)
deleted the drivers that came with the saffire and installed the drivers from the focusrite site and tried it again and it worked no more crashing after hitting stop on the record or playback thank you charlie and everyone else for the help
|