dangars
Max Output Level: -89 dBFS
- Total Posts : 95
- Joined: 2012/09/14 14:56:37
- Location: basingstoke uk
- Status: offline
Do these sound knackered!
I recently bought some Samson media one 4a's for use with my laptop whilst I am away from home. Bought them from a well known German music store, and have just plugged them in to find that the power light came on and then went straight out. I think the fuse blew, but have tried two other leads one did the same and the other didn't work. Is there a possibility I may have damaged them internally when the fuse blew? As they came from Germany they came with a European plug.
Asus all in one, 8gb memory,1tb hdd,AMD A6 Elite, Sonar platinum,Focusrite scarlett 2i2 . Axes: Epiphones, Les Paul standard, 56 gold top, LP studio deluxe, fender telecaster paisley reissue, Ibanez ax, an old strat,epiphone el-00 pro, epiphone union jack outfit sheraton. Bass:My wifes sg bass Amps: Laney TF200, Marshall valvestate vs100, orange tiny terror Pedals: a small collection. Alesis Q25
|
Evnabby
Max Output Level: -89 dBFS
- Total Posts : 70
- Joined: 2013/01/11 18:47:09
- Status: offline
Re:Do these sound knackered!
2013/01/30 21:21:54
(permalink)
Dont think plugging in a Eurpeans power plug into American is a good idea...Not sure EXACTLY what happened but I'm pretty sure you've damaged them, yes. How much? idk
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:Do these sound knackered!
2013/01/31 04:29:06
(permalink)
Good point, except he's not in America, he's in the UK dangars, I'd contact whoever you bought them from & get them sent back
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
Jeff Evans
Max Output Level: -24 dBFS
- Total Posts : 5139
- Joined: 2009/04/13 18:20:16
- Location: Ballarat, Australia
- Status: offline
Re:Do these sound knackered!
2013/01/31 05:22:49
(permalink)
Reading the manual (did you read the manual first?) there is a voltage switch on the rear where you can select between 115V and 230V. The fuse needs to be changed according to the voltage. It is possible they may be have been set to 115V not sure. The fact you had a European plug means they should have been set at 230V. Possible good news is that if they were set at 115V the fuses may be blown and they protected the speakers from further damage. But further damage may have resulted also. Can you check and see what the voltage was set to. If there is a warranty then you may have to send them back. You have done nothing wrong if they were set to the wrong voltage. Someone at their end failed to check this. They are a US company made in China but they may have been set to 115V before being sent to you. If they were set to 230V then you are also not at fault. There must be another reason they are not working. The fuse rating may be involved. The 115V setting has the higher current fuse. Explains the reason they stayed on maybe for a short time. Actually are the voltages clear on the 4a's with respect to the switch. The 3a's have the switch vertical and the voltages look clear but the 4a's have the voltage selector switch horizontal but the voltage markings look the same as the 3a's hence the confusion.
post edited by Jeff Evans - 2013/01/31 06:17:40
Specs i5-2500K 3.5 Ghz - 8 Gb RAM - Win 7 64 bit - ATI Radeon HD6900 Series - RME PCI HDSP9632 - Steinberg Midex 8 Midi interface - Faderport 8- Studio One V4 - iMac 2.5Ghz Core i5 - Sierra 10.12.6 - Focusrite Clarett thunderbolt interface Poor minds talk about people, average minds talk about events, great minds talk about ideas -Eleanor Roosevelt
|
tlw
Max Output Level: -49.5 dBFS
- Total Posts : 2567
- Joined: 2008/10/11 22:06:32
- Location: West Midlands, UK
- Status: offline
Re:Do these sound knackered!
2013/01/31 14:26:17
(permalink)
Dangars, I'd take it up with the well-known German music store. If you're talking about who I think you are, they've sent me a clearly used item as new before now, plus another that was dead on arrival. To be fair, they exchanged the items without problems.
Sonar Platinum 64bit, Windows 8.1 Pro 64bit, I7 3770K Ivybridge, 16GB Ram, Gigabyte Z77-D3H m/board, ATI 7750 graphics+ 1GB RAM, 2xIntel 520 series 220GB SSDs, 1 TB Samsung F3 + 1 TB WD HDDs, Seasonic fanless 460W psu, RME Fireface UFX, Focusrite Octopre. Assorted real synths, guitars, mandolins, diatonic accordions, percussion, fx and other stuff.
|
dangars
Max Output Level: -89 dBFS
- Total Posts : 95
- Joined: 2012/09/14 14:56:37
- Location: basingstoke uk
- Status: offline
Re:Do these sound knackered!
2013/01/31 15:54:26
(permalink)
All sorted, I took the back off and changed the fuse that had blown, that's after finding out that homebase didn't sell the fuse I needed! I also found an adapator for the European lead changed the fuse in that plugged it all back in and now have working monitors. Thanks for all your help though appreciate it.
Asus all in one, 8gb memory,1tb hdd,AMD A6 Elite, Sonar platinum,Focusrite scarlett 2i2 . Axes: Epiphones, Les Paul standard, 56 gold top, LP studio deluxe, fender telecaster paisley reissue, Ibanez ax, an old strat,epiphone el-00 pro, epiphone union jack outfit sheraton. Bass:My wifes sg bass Amps: Laney TF200, Marshall valvestate vs100, orange tiny terror Pedals: a small collection. Alesis Q25
|
Jeff Evans
Max Output Level: -24 dBFS
- Total Posts : 5139
- Joined: 2009/04/13 18:20:16
- Location: Ballarat, Australia
- Status: offline
Re:Do these sound knackered!
2013/01/31 16:37:46
(permalink)
Hi Stuart, glad you got them working. Looks like the fuses saved you. You were lucky, sometimes other things can be destroyed before the fuses kick in. Was the voltage set correctly just interested.
Specs i5-2500K 3.5 Ghz - 8 Gb RAM - Win 7 64 bit - ATI Radeon HD6900 Series - RME PCI HDSP9632 - Steinberg Midex 8 Midi interface - Faderport 8- Studio One V4 - iMac 2.5Ghz Core i5 - Sierra 10.12.6 - Focusrite Clarett thunderbolt interface Poor minds talk about people, average minds talk about events, great minds talk about ideas -Eleanor Roosevelt
|
dangars
Max Output Level: -89 dBFS
- Total Posts : 95
- Joined: 2012/09/14 14:56:37
- Location: basingstoke uk
- Status: offline
Re:Do these sound knackered!
2013/01/31 17:28:47
(permalink)
Yeah the voltage was set correctly, I think the second plug which was a UK plug done the fuse over. To be fair the manual is pretty naff, I had a good read but couldn't get the information I wanted. I played some mixes I've been working on and they sound good.
Asus all in one, 8gb memory,1tb hdd,AMD A6 Elite, Sonar platinum,Focusrite scarlett 2i2 . Axes: Epiphones, Les Paul standard, 56 gold top, LP studio deluxe, fender telecaster paisley reissue, Ibanez ax, an old strat,epiphone el-00 pro, epiphone union jack outfit sheraton. Bass:My wifes sg bass Amps: Laney TF200, Marshall valvestate vs100, orange tiny terror Pedals: a small collection. Alesis Q25
|