stoutlyric
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2006/02/02 20:43:48
- Status: offline
One envelope to automate multiple parameters
Is it possible to assign one envelope to several different parameters like on a synth, eq, reverb, etc all at the same time with one envelope? I know bidule can do this, but i was wanting to do it in cakewalk proper without adding another layer.
post edited by stoutlyric - 2013/02/17 23:46:01
|
Guitarpima
Max Output Level: -34 dBFS
- Total Posts : 4125
- Joined: 2005/11/19 23:53:59
- Location: Terra 3
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/17 23:31:36
(permalink)
You could select it, copy it and paste it where you want. That would give the the same values for another envelope type.
HTH
Notation, the original DAW. Everything else is just rote. We are who we are and no more than another. Humans, you people are crazy. Win 7 x64 X2 Intel DX58SO, Intel i7 920 2.66ghz 12gb DDR3 ASUS ATI EAH5750 650w PSU 4x WD HDs 320gb DVD, DVD RW Eleven Rack, KRK Rokit 8s and 10s sub
|
stoutlyric
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2006/02/02 20:43:48
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/17 23:39:14
(permalink)
I want ot tweak the one envelope and hear how it changes the multiple parameters all at once, so copying and pasting does not work for this.
Can you change multiple envelopes all at the same time, this could be work around. Copy the envelope to every parameter you want and then tweak them all at the same time if it even is possible?
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 01:08:36
(permalink)
To change multiple envelopes at the same time just select the area you want to adjust on the lanes/tracks you want included and move one of them.
|
stoutlyric
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2006/02/02 20:43:48
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 02:14:12
(permalink)
I just tested the multiple envelopes and selected them all and could move all at the same time if they each had a node, but if I wanted to add a node it woukd only add one node, so you would have to add a node to each envelope.
If your delaing with a lot of envelopes say seven, this is not ideal at all.
It would be great if you could assign the same envelope to multiple parameters and then be able to scale each one within a range.
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 02:18:18
(permalink)
|
stoutlyric
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2006/02/02 20:43:48
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 02:30:23
(permalink)
Sounds good, if there is no way to do this, then it should be added in a future release.
|
Saintom
Max Output Level: -58 dBFS
- Total Posts : 1749
- Joined: 2005/12/17 14:09:34
- Location: Portland Oregon
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 02:39:44
(permalink)
Put an effect in a FX chain, assign multiple parameters to a knob in the FX chain, the automate the knob on the FX chain, this should get you what you want.
I have not tried this but it should work.
Tom
Sometimes we see the light, Sometimes we stare at the light, and wonder why it is so bright...
|
Saintom
Max Output Level: -58 dBFS
- Total Posts : 1749
- Joined: 2005/12/17 14:09:34
- Location: Portland Oregon
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 02:44:06
(permalink)
Another way that might work is to group multiple parameters on the FX, then adjusting one of the parameters will affect the grouped controls. Right click on the parameters you want to group to add them to a group.
Tom
Sometimes we see the light, Sometimes we stare at the light, and wonder why it is so bright...
|
swamptooth
Max Output Level: -53 dBFS
- Total Posts : 2229
- Joined: 2012/04/16 15:44:21
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 19:45:40
(permalink)
for copying automation the easiest thing to to in x2 is show automation lanes on a track. press w to get to the beginning of the song. click the lane you want to copy. hit ctrl+c, then right-click the automation envelope and assign it to the parameter you want to copy it to. then, ctrl+v paste the original automation back into the project. kinda wonky but it works. :)
Arvid H. PetersonSonar X3E Prod / X2A / X1PE | Cubase 9.5.1 | Reason 9.5 | Sibelius7 | Pure DataNative-Instruments Komplete 10 Ultimate and a smattering of other pluginsHome-brewed VSTs Toshiba Satellite S855-S5378 (16GB RAM, modified with 2x 750GB HDDs, Windows 8.1 x64) Samson Graphite 49, M-Audio Oxygen 49, Korg nanoPAD2, Webcam motion tracking programs M-Audio Fast Track UltraMember, ASCAP
|
stoutlyric
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2006/02/02 20:43:48
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 20:46:39
(permalink)
Using the fx chain, it looks like you have a max of 4 parameters to one knob and you can't use synths. Is there any way to get more than 4?
|
swamptooth
Max Output Level: -53 dBFS
- Total Posts : 2229
- Joined: 2012/04/16 15:44:21
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/18 23:05:35
(permalink)
undock the browser and go to synth view and it will give you the option of adding parameters to the synth control strip. you can asdign them to the same midi cc for a group automation set up. this option is available if you have the browser docked in the control area as well
Arvid H. PetersonSonar X3E Prod / X2A / X1PE | Cubase 9.5.1 | Reason 9.5 | Sibelius7 | Pure DataNative-Instruments Komplete 10 Ultimate and a smattering of other pluginsHome-brewed VSTs Toshiba Satellite S855-S5378 (16GB RAM, modified with 2x 750GB HDDs, Windows 8.1 x64) Samson Graphite 49, M-Audio Oxygen 49, Korg nanoPAD2, Webcam motion tracking programs M-Audio Fast Track UltraMember, ASCAP
|
stoutlyric
Max Output Level: -88 dBFS
- Total Posts : 135
- Joined: 2006/02/02 20:43:48
- Status: offline
Re:One envelope to automate multiple parameters
2013/02/19 00:15:42
(permalink)
swamptooth
for copying automation the easiest thing to to in x2 is show automation lanes on a track. press w to get to the beginning of the song. click the lane you want to copy. hit ctrl+c, then right-click the automation envelope and assign it to the parameter you want to copy it to. then, ctrl+v paste the original automation back into the project. kinda wonky but it works. :)
Swamptooth this really helped me out. Wonky is the perfect word for this. The grouping helped as well, but seemed to be wonky also. It kept recording parameters i did'nt even have assigned to anything?
|