Sidroe
Max Output Level: -55.5 dBFS
- Total Posts : 1954
- Joined: 2010/11/10 18:59:43
- Location: Macon,Georgia
- Status: offline
Finally-Studio Captures are on their way!
GREAT! Just got notification my Roland Studio Captures have shipped. If there is anyone out there that is using them, I would love to hear from you. My main concern is if I decide to leave my MOTU 24io installed will it cause any driver conflicts with the Studio captures. I run ASIO drivers and I know you are only allowed one driver at a time in that mode. I'm hoping that I can keep my MOTU in there until I am up to speed with the Studio Captures. Anyone want to help with some tips?
Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/01 08:17:40
(permalink)
Great, do write about how it sounds and track (all channels if I'm not asking too much)! :)
Regarding ASIO driver, I have 3 installed : Quad Capture (current), Alesis firewire and Phonic firewire. No problem as only one is active at any time.
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
Sidroe
Max Output Level: -55.5 dBFS
- Total Posts : 1954
- Joined: 2010/11/10 18:59:43
- Location: Macon,Georgia
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/01 09:33:37
(permalink)
Hi,mix,
Thanks for the comfort there. I hope mine runs as well. I do intend to start a thread about my experiences with the new interfaces. I will try to keep everyone posted about the progress I make with them.
Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!
|
BENT
Max Output Level: -83 dBFS
- Total Posts : 355
- Joined: 2013/03/25 05:40:49
- Location: Somewhere over the Multiverse... la la la
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 02:04:09
(permalink)
Ditto…. Regarding ASIO driver, I have 3 installed : Octa-Capture-UA1010, Quad-Capture-UA55 and UA-25 and I use one at any time.
Please do start a thread about your experiences with the new interfaces.
Capture or is it Captures singular/plural????
If it is plural will be interesting to hear what driver mode is most successful WDM/KS or WASAPI
I have empirical evidence this is true... (Bender told me!)  Cakewalk by BandLab, Splat and other DAW's PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, Monitors = 2 24” Samsung SA450 and 1 20” Dele Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500, Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 02:21:39
(permalink)
Look at Sid's signature ...2 Roland Studio Captures !
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
BENT
Max Output Level: -83 dBFS
- Total Posts : 355
- Joined: 2013/03/25 05:40:49
- Location: Somewhere over the Multiverse... la la la
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 02:43:09
(permalink)
Sidroe GREAT! Just got notification my Roland Studio Captures have shipped. Hey Sidroe, your on the ball with your signature updates... lol 
post edited by BENT - 2013/07/02 04:29:21
I have empirical evidence this is true... (Bender told me!) Cakewalk by BandLab, Splat and other DAW's PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, Monitors = 2 24” Samsung SA450 and 1 20” Dele Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500, Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
|
FCCfirstclass
Max Output Level: -71 dBFS
- Total Posts : 969
- Joined: 2003/11/15 15:02:42
- Location: Las Vegas, Nevada
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 07:19:13
(permalink)
For those of you who also have a VS 700 or VS 100, the word from Roland is that they will interface with the Octa Capture, Studio or Quad as long as the units have the latest firmware and the digital in and out jacks. I am getting a Studio Capture next month and will interface with my VS 100.
Cheers and Good Recording.
Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture, A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments. And away we go!
|
Sidroe
Max Output Level: -55.5 dBFS
- Total Posts : 1954
- Joined: 2010/11/10 18:59:43
- Location: Macon,Georgia
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 08:12:23
(permalink)
Hey, Bent! Yea, I try to remember to keep it updated. Let's just hope I don't end up deleting the Captures from the list out of frustration! I've been doing this long enough to know the quagmire of getting new hardware to play friendly with the rest of the playground. LOL Right now, they're sitting in Missouri somewhere. But it says they have been processed and ready for UPS as of 7:44 pm last night.
Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!
|
Grem
Max Output Level: -19.5 dBFS
- Total Posts : 5562
- Joined: 2005/06/28 09:26:32
- Location: Baton Rouge Area
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 10:08:37
(permalink)
I also have two different audio interfaces. Both work when I select one at a time.
But if you have two SC, will you be able to use them both at same time? Will the asio drivers allow that? Or are the drivers written to allow compatible devices to use one driver?
Grem
Michael Music PC i7 2600K; 64gb Ram; 3 256gb SSD, System, Samples, Audio; 1TB & 2TB Project Storage; 2TB system BkUp; RME FireFace 400; Win 10 Pro 64; CWbBL 64, Home PCAMD FX 6300; 8gb Ram; 256 SSD sys; 2TB audio/samples; Realtek WASAPI; Win 10 Home 64; CWbBL 64 Surface Pro 3Win 10 i7 8gb RAM; CWbBL 64
|
Sidroe
Max Output Level: -55.5 dBFS
- Total Posts : 1954
- Joined: 2010/11/10 18:59:43
- Location: Macon,Georgia
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 10:15:48
(permalink)
☄ Helpfulby Grem 2013/07/03 21:31:56
Hi,Grem,
Each Studio Capture has it's own USB cable. So, you plug in to two USB ports but they both use the same driver! They are synched by the digital in out ports. One Studio Capture syncs to the clock of the other. There is extensive info on Roland's site about the hookup and how to sync up two Captures.
Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!
|
Sidroe
Max Output Level: -55.5 dBFS
- Total Posts : 1954
- Joined: 2010/11/10 18:59:43
- Location: Macon,Georgia
- Status: offline
Re: Finally-Studio Captures are on their way!
2013/07/02 10:18:19
(permalink)
The Studio Capture line will be able to be used with the previous versions of Roland's Capture devices. AFAIK, the limit is only 2 devices at one time for now.
Sonar Platinum, Sonar X3e, Sonar X2a , Sonar X1 Expanded and 8.5.3 (32 and 64 bit), Windows 10 on a Toshiba P75-A7200 Laptop with i7 @ 2.4 quad and 8 gigs of RAM and secondary WD 1 Tb drive, Windows 10 desktop, Asus i5 @ 3.2 quad, 12 gigs RAM, 1 Tb drive, 1 500 gig drive, MOTU 24io, 2 Roland Studio Captures, Saffire 6 USB for laptop, Soundtracs Topaz Project 8 mixer, Alesis Monitor 2s, Event BAS 20/20s, Roland Micro-Monitor BA-8s, and 45 years worth of collecting FX, Mics, Amps, Guitars, and Keyboards!
|