AnsweredSONAR X1 Automation problem

Author
Post
Essentials Only Full Version
reza
Max Output Level: -85 dBFS
  • Total Posts : 262
  • Joined: 2011/02/07 05:07:46
  • Location: VANCOUVER,BC
  • Status: offline
2013/07/27 16:22:20 (permalink)

SONAR X1 Automation problem

Hi Guys
a day after mixing one of my project I came back to listen to it and found out none of my automations don't work. I tried different projects no problem and they could run all the automations fine. After couple minutes playing with the project ,  I found out all the automations are exist but the only way to make them to work is, I have to turn on the write enable automation as well as read enable automation, which I haven't had this issue before. I opened a new project and no problem. tried the other projects , no problem.  just I do have the issue with this specific project. so I saved it with different name and deleted all the tracks and open new audio track to see maybe one of my old tracks caused this issue but same problem with the new audio track. and as I said write enable must be on that automation can work.
I would be appreciate if any buddy can help me to fix the issue.
Thanks
#1
See best answer

10 Replies Related Threads
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 2006/01/16 16:07:06
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/27 17:52:06 (permalink)
    I have experienced a bug with certain projects that is similar.  Tracks only respond to Automation if Write is turned on.  That makes no sense, I know.

    Konrad
    Current album and more: http://www.themightykonrad.com/

    Sonar X1d Producer. V-Studio 700. PC: Intel i7 CPU 3.07GHz, 12 GB RAM. Win 7 64-bit. RealGuitar, RealStrat, RealLPC, Ivory II, Vienna Symphonic, Hollywood Strings, Electr6ity, Acoustic Legends, FabFour, Scarbee Rick/J-Bass/P-Bass, Kontakt 5. NI Session Guitar. Boldersounds, Noisefirm. EZ Drummer 2. EZ Mix. Melodyne Assist. Guitar Rig 4. Tyros 2, JV-1080, Kurzweil PC2R, TC Helicon VoiceWorks+. Rode NT2a, EV RE20. Presonus Eureka.  Rokit 6s. 
    #2
    gswitz
    Max Output Level: -18.5 dBFS
    • Total Posts : 5694
    • Joined: 2007/06/16 07:17:14
    • Location: Richmond Virginia USA
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/27 19:02:09 (permalink)
    You haven't bypassed automation read globally have you?

    StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
    I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
    #3
    reza
    Max Output Level: -85 dBFS
    • Total Posts : 262
    • Joined: 2011/02/07 05:07:46
    • Location: VANCOUVER,BC
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/27 22:44:10 (permalink)
    You haven't bypassed automation read globally have you?

     
    No, I have not. It is on read enable. I hope I can get a solution for it otherwise I have to open a new project and cut, paste, all the tracks. 
     
    #4
    reza
    Max Output Level: -85 dBFS
    • Total Posts : 262
    • Joined: 2011/02/07 05:07:46
    • Location: VANCOUVER,BC
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/28 04:07:27 (permalink)
    No Help?
    #5
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/28 04:34:33 (permalink)
    Are you in Offset mode?

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #6
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/28 04:34:40 (permalink) ☼ Best Answerby REZA 2013/07/28 19:16:45
    Are you in Offset mode?

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #7
    DW_Mike
    Max Output Level: -6 dBFS
    • Total Posts : 6907
    • Joined: 2006/11/29 18:06:40
    • Location: The arm-pit of the good 'ol US...New Jersey
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/28 12:09:53 (permalink)
    I've had this same problem for years now.
    I noticed that for me Clip Automation doesn't work but Track does.
    This is a hard one to reproduce since in my case at least it seems to be totally random. One run through and all is well then the next few nothing, then all is well for a few more runs.
    I just use Track Automation now all the time.
     
    I have also tried to move to a new project and no difference.
     
    Sorry if this is no help but until there is a way to reproduce this consistently it makes it tough to trouble shoot.
     
    Mike 

    Sonar X3 ~ Scarlett 18i6 ~ Home Build DAW  
    GA-Z77X-UD5H
    Intel i7 3770k 4.2GHz
    32GB RAM Crucial Ballistix Elite (4x8) 
    2x Samsung 250GB SSD 
    1TB WD Black HDD @ 7200RPM 6Gb/s 64MB 
    Corsair H80i Liquid cooler 
    Noctua Silent Fans ~ 3x120mm ~ 1x140mm 
    Seasonic Platinum 760w PSU 
    Windows 7 Pro 64Bit.
    #8
    reza
    Max Output Level: -85 dBFS
    • Total Posts : 262
    • Joined: 2011/02/07 05:07:46
    • Location: VANCOUVER,BC
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/28 19:20:11 (permalink)
    Bristol_Jonesey
    Are you in Offset mode?


    Thanks . you made all my day Bristol. I think I was accidently pressed O and project was under offset mode. I pressed O again and every thing backed to normal :)
    Thanks
    #9
    gswitz
    Max Output Level: -18.5 dBFS
    • Total Posts : 5694
    • Joined: 2007/06/16 07:17:14
    • Location: Richmond Virginia USA
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/28 20:34:12 (permalink)
    Reza... you may need to undo all the damage done in offset mode. Move from item to item in offset mode and anything not at 0 double click -- pans - volumes etc. This should help get them back to the way they were. Also, I have changed the o key binding to save or something innocuous.

    StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen.
    I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
    #10
    reza
    Max Output Level: -85 dBFS
    • Total Posts : 262
    • Joined: 2011/02/07 05:07:46
    • Location: VANCOUVER,BC
    • Status: offline
    Re: SONAR X1 Automation problem 2013/07/29 01:53:31 (permalink)
    gswitz
    Reza... you may need to undo all the damage done in offset mode. Move from item to item in offset mode and anything not at 0 double click -- pans - volumes etc. This should help get them back to the way they were. Also, I have changed the o key binding to save or something innocuous.


    Ok . So far every thing is fine. 
    Thanks for your help :)
    #11
    Jump to:
    © 2025 APG vNext Commercial Version 5.1