Helpful ReplyPC1333 vs PC1600

Author
aglewis723
Max Output Level: -86 dBFS
  • Total Posts : 216
  • Joined: 2013/01/14 14:28:02
  • Location: New Jersey
  • Status: offline
2013/08/01 11:58:50 (permalink)

PC1333 vs PC1600

Hi Everyone,
 
I am building a new DAW, a friend is selling me PC1333 (16GB) memory.  Should I be concerned it is not PC1600 or does it not make much of a difference?
 
Thank You,
Adam
post edited by aglewis723 - 2013/08/01 17:43:05

"Do No Harm"
#1
Jim Roseberry
Max Output Level: 0 dBFS
  • Total Posts : 9871
  • Joined: 2004/03/23 11:34:51
  • Location: Ohio
  • Status: offline
Re: PC1333 vs PC1600 2013/08/02 11:51:21 (permalink)
Running at 1333MHz won't slow things down too much...
But, I wouldn't skimp on the core hardware of your machine.
16GB of decent quality RAM should cost you about $100.
 
Do you know what you're getting?
ie:  The voltage, timing, etc

Best Regards,

Jim Roseberry
jim@studiocat.com
www.studiocat.com
#2
larrymcg
Max Output Level: -64 dBFS
  • Total Posts : 1310
  • Joined: 2003/11/05 17:00:22
  • Location: Redding (Northern California)
  • Status: offline
Re: PC1333 vs PC1600 2013/08/02 15:54:43 (permalink)
You also want to know what memory the CPU and mobo support.
 

Intel Core i7-4790 @3.6GHz; 8GB; Win10 Pro 64bit; 1TB disk + 3TB ext disk; Midiman Fineline mixer; MidiSport 4x4 midi I/F; Roland JV-30 kbd/synth; Yamaha TG55 synth; Rx with 3 piece Home audio speakers; Sonar X3e Studio
#3
IronSound
Max Output Level: -89 dBFS
  • Total Posts : 61
  • Joined: 2010/05/06 19:47:16
  • Location: Lincoln. NE
  • Status: offline
Re: PC1333 vs PC1600 2013/08/03 04:32:51 (permalink)
Hello... The difference between 16gig of 1333 and 1600 memory speed is measured in nano seconds, in the Past, Quantity was the main concern for performance, when used in a Windows operating system.
 
But further thoughts on the subject...
1) Current I5 and I7 Cpu's are rated at 1600 1.5 volts and the I3 at 1333 1.5 volts.
2) Current DDR3 prices have more than doubled since the 2012 holiday season.
3) A SSD Drive will give you the biggest precieved speed/performance boost, when compared to 1333 vs 1600 of DDR3
 
My current Spec/Standard for Buying/Building with 16gig of new DDR3 memory is that be... two 8gig sticks, dual channel at 1600 1.5 volts.
 
 
post edited by IronSound - 2013/08/03 04:40:31
#4
Jim Roseberry
Max Output Level: 0 dBFS
  • Total Posts : 9871
  • Joined: 2004/03/23 11:34:51
  • Location: Ohio
  • Status: offline
Re: PC1333 vs PC1600 2013/08/03 12:23:26 (permalink) ☄ Helpfulby chefmike8888 2013/08/03 18:20:56
If buying new, I wouldn't buy DDR3-1333 instead of DDR3-1600.
The cost difference is minimal... especially when considered over the life of the machine.
16GB of Quality DDR3/1600 1.5v Cas-9 RAM can be had for $100.
 
Regarding SSD (as boot drive), the machine will boot faster... and the OS will be a little more snappy.
A fast SSD is roughly three times the speed of a conventional HD... but don't expect the OS to respond three times as fast.
Where SSD makes the biggest impact is when used to stream large sample libraries.  The libraries load much faster... and you can pull massive polyphony.
 
 
 

Best Regards,

Jim Roseberry
jim@studiocat.com
www.studiocat.com
#5
DW_Mike
Max Output Level: -6 dBFS
  • Total Posts : 6907
  • Joined: 2006/11/29 18:06:40
  • Location: The arm-pit of the good 'ol US...New Jersey
  • Status: offline
Re: PC1333 vs PC1600 2013/08/03 18:24:23 (permalink)
+1 to Jim's advice.
No need to skimp on RAM especially since it's so damn cheap now a day's.
 
Mike

Sonar X3 ~ Scarlett 18i6 ~ Home Build DAW  
GA-Z77X-UD5H
Intel i7 3770k 4.2GHz
32GB RAM Crucial Ballistix Elite (4x8) 
2x Samsung 250GB SSD 
1TB WD Black HDD @ 7200RPM 6Gb/s 64MB 
Corsair H80i Liquid cooler 
Noctua Silent Fans ~ 3x120mm ~ 1x140mm 
Seasonic Platinum 760w PSU 
Windows 7 Pro 64Bit.
#6
jjthomas
Max Output Level: -89 dBFS
  • Total Posts : 94
  • Joined: 2005/11/02 19:01:20
  • Status: offline
Re: PC1333 vs PC1600 2013/08/10 01:37:31 (permalink)
I would politely pass.  RAM problems are one of the most difficult things to troubleshoot.  Also did your friend follow all the ESD procedures when handling the RAM? 
 
-JJ
#7
Jump to:
© 2024 APG vNext Commercial Version 5.1