Assigning Channel \ Tracks 9 and above to the Tascam 1884 or other control surface

Author
Post
Essentials Only Full Version
smackdog
Max Output Level: -90 dBFS
  • Total Posts : 14
  • Joined: 2008/04/30 08:17:12
  • Status: offline
2013/09/02 14:32:09 (permalink)

Assigning Channel \ Tracks 9 and above to the Tascam 1884 or other control surface

Hi folks.
 
Hope you are well.
 
Many thanks to 
 
Excellent site for setting up my Tascam 1884.
 
Quick question.
If I have 8 tracks in Sonar, the Tascam has the 8 faders assigned to itself automatically. Which is great.
 
Is there any easy way to assign track greater than 8 to the faders.
 
For example.
Assigning Tracks 9 to 16 to faders 1 to 8.
 
Currently Im using the faders for tracks 1 to 8 and my mouse for any additional tracks.
 
Thanks very much in advance. 
 
Cheers.
 
 
#1

4 Replies Related Threads
    smackdog
    Max Output Level: -90 dBFS
    • Total Posts : 14
    • Joined: 2008/04/30 08:17:12
    • Status: offline
    Re: Assigning Channel \ Tracks 9 and above to the Tascam 1884 or other control surface 2013/09/02 14:33:26 (permalink)
    "Many thanks to deerinamps 
    Excellent site for setting up my Tascam 1884."
     
    Link was removed in post. :)
    #2
    DeeringAmps
    Max Output Level: -49 dBFS
    • Total Posts : 2614
    • Joined: 2005/10/03 10:29:25
    • Location: Seattle area
    • Status: offline
    Re: Assigning Channel \ Tracks 9 and above to the Tascam 1884 or other control surface 2013/09/02 14:38:48 (permalink)
    Smack,
    A little detail on your system setup would help, but just use the "BANK <  or >" on the FW to move thru the faders.
    If you hold the "SET" and push one of the BANK keys you will be controlling the busses.
     
    HTH,
     
    Tom

    Tom Deering
    Tascam FW-1884 User Resources Page
    Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

    Win10x64
    StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

    RME UFX (Audio)
    Tascam FW-1884 (Control) in Win 10x64 Pro
    #3
    smackdog
    Max Output Level: -90 dBFS
    • Total Posts : 14
    • Joined: 2008/04/30 08:17:12
    • Status: offline
    Re: Assigning Channel \ Tracks 9 and above to the Tascam 1884 or other control surface 2013/09/07 08:02:09 (permalink)
    Excellent Tom thanks.
     
    I will give it a go over the weekend.
     
    Cheers

    FX8120 Eight Core 3.10 GHz x8 32GB DDR3 RAM
    Behringer T1952 
    Behringer Ultragraph FBQ 3102
    Behringer PX3000 Ultrapatch Pro
    M-Audio Axiom 49
    Tascam 1884
    #4
    smackdog
    Max Output Level: -90 dBFS
    • Total Posts : 14
    • Joined: 2008/04/30 08:17:12
    • Status: offline
    Re: Assigning Channel \ Tracks 9 and above to the Tascam 1884 or other control surface 2013/09/12 15:16:26 (permalink)
    Hi tom.
     
    Worked a treat. :)
     
    Any other tips and tricks that will be useful to know on the Tascam 1884?? :)
    Im sure you must have a few tricks up your sleeve mate.. LOL
     
    Thanks again.
     
    Cheers

    FX8120 Eight Core 3.10 GHz x8 32GB DDR3 RAM
    Behringer T1952 
    Behringer Ultragraph FBQ 3102
    Behringer PX3000 Ultrapatch Pro
    M-Audio Axiom 49
    Tascam 1884
    #5
    Jump to:
    © 2025 APG vNext Commercial Version 5.1