Cakewalk by BandLab
Prev Thread
Next Thread

AnsweredNew Issue (X3b) with AD and LP-64 Multiband

Author
Post
Essentials Only Full Version
meh
Max Output Level: -82 dBFS
  • Total Posts : 431
  • Joined: 6/11/2005
  • Location: Tempe, Az
  • Status: offline
October 11, 13 6:14 PM (permalink)

New Issue (X3b) with AD and LP-64 Multiband

Setup a sequence with AD, Insert LP-64 Multiband (default Mastering Lighter preset) in the Master bus and AD goes silent.  If I turn off LP-64 Multiband AD is fine.
 
Any Thoughts?

SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz 
32g memory
2tb disk space 
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
#1
See best answer

7 Replies Related Threads
    Dude Ivey
    Max Output Level: -85 dBFS
    • Total Posts : 280
    • Joined: 12/25/2012
    • Location: Athens, Texas
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 11, 13 10:14 PM (permalink)
    I did this as you said and had no problem. AD worked fine when I turned the LP-64 on and off.

    X-3e/X-2a, Windows 7 64bit, Intel i7-2600, 16Gb ram, 4 Tb HDD, 32 inch monitor, RME FireFace UFX, Shure SRH1840 Headphones, KRK Rockit 5 monitors w/ KRK 10 inch sub and 3 Dachshunds.
    #2
    John
    Forum Host
    • Total Posts : 30467
    • Joined: 11/6/2003
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 11, 13 10:37 PM (permalink)
    I tried it and no issues. 

    Best
    John
    #3
    Dan Gonzalez [Cakewalk]
    Administrator
    • Total Posts : 395
    • Joined: 1/14/2013
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 11, 13 11:21 PM (permalink)
    meh
    Setup a sequence with AD, Insert LP-64 Multiband (default Mastering Lighter preset) in the Master bus and AD goes silent.  If I turn off LP-64 Multiband AD is fine.
     
    Any Thoughts?




    This may be project specific.  Does it happen in brand new projects?
    #4
    meh
    Max Output Level: -82 dBFS
    • Total Posts : 431
    • Joined: 6/11/2005
    • Location: Tempe, Az
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 12, 13 0:57 PM (permalink)
    Dan Gonzalez [Cakewalk]
    Does it happen in brand new projects?


    Yes this is a new project....
    This was not a clean install it was an upgrade X2 worked like a champ.  Maybe I should try a clean install.
     
    thx

    SONAR Version 2017.09
    HP Z-420 Workstation
    Intel Xeon W3680 @3.50ghz 
    32g memory
    2tb disk space 
    Win2008 Server R2 Standard 64-bit
    TASCAM US-1641 interface
    #5
    mudgel
    Max Output Level: 0 dBFS
    • Total Posts : 12010
    • Joined: 8/13/2004
    • Location: Linton Victoria (Near Ballarat)
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 12, 13 1:30 AM (permalink)
    It's still a clean install. Any Sonar installation does not depend on any files that are on your computer related to a previous version. Some plugins are shared across version but nothing in the core program. On installation, Sonar reads settings from your most recent version and applies them to the new version.

    Mike V. (MUDGEL)

    STUDIO: Win 10 Pro x64, SPlat & CbB x64,
    PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
    Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
    Monitors: Adam A7X, JBL 10” Sub.
    Audio I/O & DSP Server: DIGIGRID IOS & IOX.
    Screen: Raven MTi + 43" HD 4K TV Monitor.
    Keyboard Controller: Native Instruments Komplete Kontrol S88.
    #6
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 9/14/2007
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 12, 13 1:55 AM (permalink) ☼ Best Answerby meh October 12, 13 9:16 AM
    Possibly a MIDI buffering issue because LP-64 introduces PDC? Try setting your MIDI Prepare Using buffer up to 500ms if it's not there already.
     
    And/or do you have any MIDI FX in the project (not just on that track)? They can also introduce some buffering issues.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #7
    meh
    Max Output Level: -82 dBFS
    • Total Posts : 431
    • Joined: 6/11/2005
    • Location: Tempe, Az
    • Status: offline
    Re: New Issue (X3b) with AD and LP-64 Multiband October 12, 13 9:16 AM (permalink)
    brundlefly
    Possibly a MIDI buffering issue because LP-64 introduces PDC? Try setting your MIDI Prepare Using buffer up to 500ms if it's not there already.
    And/or do you have any MIDI FX in the project ... No


    MIDI Prepare Using buffer that was it....thanks

    SONAR Version 2017.09
    HP Z-420 Workstation
    Intel Xeon W3680 @3.50ghz 
    32g memory
    2tb disk space 
    Win2008 Server R2 Standard 64-bit
    TASCAM US-1641 interface
    #8
    Home » [Cakewalk Products] » SONAR » New Issue (X3b) with AD and LP-64 Multiband
    Jump to:
    © 2025 APG vNext Commercial Version 5.1