ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
FabFilter Pro-MB
 Key features- Up to six processing bands, freely placed anywhere in the spectrum
- Bands can be easily snapped together to form a traditional crossover system
- Unique Dynamic Phase processing mode featuring zero latency, no static phase changes and no pre-ringing artifacts
- Excellent Linear Phase processing mode, eliminating audible artifacts when quickly changing crossover frequencies
- Minimum Phase processing mode
- Handles any form of dynamics processing, from highly transparent compression, limiting and expansion to pumping upward compression and punchy gating
- Fully customizable per band: threshold, range, attack, release, output gain, ratio, variable knee, lookahead (up to 20 ms), variable stereo linking, mid- or side-only processing, external side chain input, triggering on a separate frequency range
- Steepness of each crossover slope can be freely adjusted between 6 dB/oct and 48 dB/oct
- Intelligent, highly program- and frequency-dependent attack and release curves
- Global dry/wet mix from 0% to 200% to easily scale the total effect of the plug-in
- Unique interactive multiband display, designed for an optimal workflow
- Accurate and smooth real-time frequency analyzer with pre- and post-processing options and 'freeze' feature
- High-quality audio processing algorithms with 64-bit internal processing where needed
- Up to four times linear-phase oversampling
- Band solo/mute and bypass options
- Precise output metering
- GPU-powered graphics acceleration
- Double-click text entry of parameter values
- Stereo and mono plug-ins available
- Supports common Pro Tools hardware control surfaces
- MIDI Learn
- Undo/redo and A/B comparison
- Smart Parameter Interpolation
- Sample-accurate automation of all parameters
- Extensive help file with interactive help hints
FabFilter Pro-MB $229.00 http://www.fabfilter.com/http://www.fabfilter.com/products/pro-mb-multiband-compressor-expander-plug-in
post edited by carl - 2013/10/17 06:10:32
|
ProjectM
Max Output Level: -36 dBFS
- Total Posts : 3941
- Joined: 2004/02/10 09:32:12
- Location: Norway
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 10:15:12
(permalink)
Since it's Fabfilter, I'll probably get it. But I must have enough multiband comps by now...?
Cheers for the heads up!
(Sonar Platinum - Win10 x64) - iMac and 13" MacBook - Logic Pro X ++ - UA Apollo Twin DUO - NI Maschine MKII - NI Komplete Kontrol S61 - Novation Nocturne - KRK Rokit 6 SoundcloudNegative Vibe Records
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 10:43:37
(permalink)
Same here. I'm sure it's good & will demo.
The functionality in the expander appeals to me more than a multiband comp.
I hope Dan does the video, I always enjoy watching them.
|
cryophonik
Max Output Level: -28 dBFS
- Total Posts : 4724
- Joined: 2006/04/03 17:28:17
- Location: Elk Grove, CA
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 11:08:33
(permalink)
carl
The functionality in the expander appeals to me more than a multiband comp.
Do you think it will be an upward or downward expander, though? For mastering purposes, an upward expander would seem to make the most sense, but a downward MB expander probably has more widespread utility (essentially a MB Pro-G).
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 11:27:36
(permalink)
It should do both depending on how thresholds, knees & ratios are set.
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 12:29:14
(permalink)
☄ Helpfulby bapu 2013/10/18 16:02:53
Been waiting for this one. Figures, though, that it would be released when I have no money...
 All else is in doubt, so this is the truth I cling to. My Stuff
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 12:45:02
(permalink)
bitflipper
Been waiting for this one. Figures, though, that it would be released when I have no money...
Maybe with an intro offer plus your other FF plugins it might be doable? There's also a paid update coming for Pro-Q / 2.0. Maybe it will include some type of incentive which would apply to the MB as well.
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 14:09:28
(permalink)
FabFilter Pro-MB is a powerful yet intuitive multiband dynamics plug-in. In this tutorial, Dan Worall introduces the plug-in and its main controls, and gives some useful examples of multiband dynamics processing on single tracks or full mixes. http://www.youtube.com/watch?v=LNkaGACWuhs
|
cryophonik
Max Output Level: -28 dBFS
- Total Posts : 4724
- Joined: 2006/04/03 17:28:17
- Location: Elk Grove, CA
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 14:15:59
(permalink)
carl
It should do both depending on how thresholds, knees & ratios are set.
Well, not necessarily. All compressors and expanders have those parameters, but they don't necessarily all do upward expansion (decompression) or upward compression (de-expansion), unless they have a dedicated mode or range of values (e.g., postive threshold). However, Dan Warrell did confirm on KVR that Pro-MB will do upward and downward compression and expansion. carl
There's also a paid update coming for Pro-Q / 2.0.
Really?! Any idea what it will have/do that v1 doesn't?
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 14:30:01
(permalink)
cryophonik
carl
It should do both depending on how thresholds, knees & ratios are set.
Well, not necessarily. All compressors and expanders have those parameters, but they don't necessarily all do upward expansion (decompression) or upward compression (de-expansion), unless they have a dedicated mode or range of values (e.g., postive threshold). However, Dan Warrell did confirm on KVR that Pro-MB will do upward and downward compression and expansion.
carl
There's also a paid update coming for Pro-Q / 2.0.
Really?! Any idea what it will have/do that v1 doesn't?
Well yes, I assumed FF would have these features included like other MB's do. Pro-Q will have improvements & new features. I'm guessing comparable to DMG's Equilibrium.
post edited by carl - 2013/10/16 14:32:33
|
cryophonik
Max Output Level: -28 dBFS
- Total Posts : 4724
- Joined: 2006/04/03 17:28:17
- Location: Elk Grove, CA
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 14:52:43
(permalink)
|
TheSteven
Max Output Level: -55 dBFS
- Total Posts : 2037
- Joined: 2005/03/05 01:17:06
- Location: Southern California
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 18:42:00
(permalink)
Edit: I checked the YouTube video - Nice... looks like FabFilter put a lot of thought into it. Even so, I've already hit the G.A.S. pedal a couple time recently so it's not in the budget right now. Simi-related - speaking of multi-band I picked up Blue Cat's MB-7 Mixer before I heard about this and have been playing with it. You can have up to 7 bands and the ability to insert & stack VSTs in any band (comp, limiter, saturation or other FX's) or just use it as an EQ. I'm not really a fan of stacking FXs in a plug-in, prefer to handle in the DAW but being able to add FXs within a band is pretty cool. They've got some pretty cool demo videos on their web site. They had a 20% off sale that was supposed to end on the 15th but looks like they're still honoring it. Anyway back to the previous subject...
post edited by TheSteven - 2013/10/17 00:12:00
"Time is a great teacher, but unfortunately it kills all its pupils" Loius-Hector Berlioz  www.AgitatedState.com MenuMagic - plug-in management powertools! My Tunes
|
cecelius2
Max Output Level: -61 dBFS
- Total Posts : 1494
- Joined: 2009/11/06 16:12:11
- Location: Pacific Northwest
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 22:14:40
(permalink)
cryophonik
First vid up:
http://www.youtube.com/watch?v=LNkaGACWuhs
This video is great as are all of Dan's. I had been wondering when Fabfilter would come out with a MB. Strange that it took this long. Will be watching for a sale to grab this.
|
Fog
Max Output Level: 0 dBFS
- Total Posts : 12302
- Joined: 2008/02/27 21:53:35
- Location: UK
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/16 22:21:12
(permalink)
1) xmas discount (as past years.. but maybe only bundles *sigh* )
2) intro offer (like d16 / uhe did recently :) )
place ya bets..
very tempted.. and like the rest of you I own 1+ thing that already does it.. how it looks visually appeals to me as well, with regard to how it moves the curve also, as opposed to just the raw signal.
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB
2013/10/17 06:01:41
(permalink)
Released this morning: $229.00 http://www.fabfilter.com/products/pro-mb-multiband-compressor-expander-plug-inKey features- Up to six processing bands, freely placed anywhere in the spectrum
- Bands can be easily snapped together to form a traditional crossover system
- Unique Dynamic Phase processing mode featuring zero latency, no static phase changes and no pre-ringing artifacts
- Excellent Linear Phase processing mode, eliminating audible artifacts when quickly changing crossover frequencies
- Minimum Phase processing mode
- Handles any form of dynamics processing, from highly transparent compression, limiting and expansion to pumping upward compression and punchy gating
- Fully customizable per band: threshold, range, attack, release, output gain, ratio, variable knee, lookahead (up to 20 ms), variable stereo linking, mid- or side-only processing, external side chain input, triggering on a separate frequency range
- Steepness of each crossover slope can be freely adjusted between 6 dB/oct and 48 dB/oct
- Intelligent, highly program- and frequency-dependent attack and release curves
- Global dry/wet mix from 0% to 200% to easily scale the total effect of the plug-in
- Unique interactive multiband display, designed for an optimal workflow
- Accurate and smooth real-time frequency analyzer with pre- and post-processing options and 'freeze' feature
- High-quality audio processing algorithms with 64-bit internal processing where needed
- Up to four times linear-phase oversampling
- Band solo/mute and bypass options
- Precise output metering
- GPU-powered graphics acceleration
- Double-click text entry of parameter values
- Stereo and mono plug-ins available
- Supports common Pro Tools hardware control surfaces
- MIDI Learn
- Undo/redo and A/B comparison
- Smart Parameter Interpolation
- Sample-accurate automation of all parameters
- Extensive help file with interactive help hints
- Available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit), as well as RTAS (32-bit only)
post edited by carl - 2013/10/17 06:12:25
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB
2013/10/17 07:40:03
(permalink)
This thing is sweet, it's a done deal here.
Try the demo if you can. Very useful for adding dynamics & adding clarity.
Start with the presets as starting points then start adjusting.
I had a few glitches, not sure if it's from the oversampling otherwise it's functioning well.
Off now to dig deeper.
|
rtucker55
Max Output Level: -53.5 dBFS
- Total Posts : 2177
- Joined: 2005/06/20 21:11:47
- Location: Hope, Indiana
- Status: offline
Re: FabFilter Pro-MB
2013/10/17 11:33:22
(permalink)
Thanks for the info Carl!
Have you seen any time frame or potential prices on the paid update to Pro-Q 2.0?
Kind regards,
Rick
Purrrfect Audio DAW here. Wow!...
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB
2013/10/17 12:06:25
(permalink)
No Rick,
All I know is that it's in the works.
|
backwoods
Max Output Level: -49.5 dBFS
- Total Posts : 2571
- Joined: 2011/03/23 17:24:50
- Location: South Pacific
- Status: offline
Re: FabFilter Pro-MB
2013/10/17 17:45:49
(permalink)
Had a change of heart and bought it.
post edited by backwoods - 2013/10/18 16:56:53
|
cecelius2
Max Output Level: -61 dBFS
- Total Posts : 1494
- Joined: 2009/11/06 16:12:11
- Location: Pacific Northwest
- Status: offline
Re: FabFilter Pro-MB
2013/10/17 20:21:52
(permalink)
Just checked how much it would cost me by logging into my FF account. They discount based upon how many other FF plugins you already own. For me the MB would cost $137.40. That is a 40% discount. While a good deal, I will have to wait for now as I spent my savings on Orange Tree GB and X3 upgrade. It looks pretty and I now FF did it right, just money is too tight. Bad timing.
|
ltb
Max Output Level: -48 dBFS
- Total Posts : 2707
- Joined: 2005/06/19 13:34:08
- Status: offline
Re: FabFilter Pro-MB
2013/10/18 14:54:56
(permalink)
Well I have to say this is my fav FF plugin so far.
It's also the my fav MB that I own.
Very easy to set up & use. You don't have to worry so much about screwing up crossover points like many others.
It functions differently than typical MB's do.
I usually don't use MB's very much at all as they can easily trash a track or mix but this one is very transparent & smooth to my ears.
To really test I tried it on a few orchestral stems, usually I'll only use MB for plosives.
Using 4 bands I'm able to gently eq the entire freq. spectrum, achieving a bit more clarity without destroying or squashing dynamics. I'm not getting as much of that typical & obvious harshness as with most MB's.
I'm pleasantly impressed so far.
Checking out the SC features next.
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: FabFilter Pro-MB
2013/10/18 15:37:39
(permalink)
cecelius2
Just checked how much it would cost me by logging into my FF account. They discount based upon how many other FF plugins you already own. For me the MB would cost $137.40. That is a 40% discount. While a good deal, I will have to wait for now as I spent my savings on Orange Tree GB and X3 upgrade. It looks pretty and I now FF did it right, just money is too tight. Bad timing.
The good thing about FF is the discount is always there.
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: FabFilter Pro-MB
2013/10/18 17:38:44
(permalink)
Sigh. I guess I'll have to make do with all the other multi-band compressors and dynamic equalizers in my toolbox. I'm so deprived.
All else is in doubt, so this is the truth I cling to. My Stuff
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/18 18:34:33
(permalink)
bitflipper
Been waiting for this one. Figures, though, that it would be released when I have no money...
-$ for me too.
|
cclarry
Max Output Level: 0 dBFS
- Total Posts : 20964
- Joined: 2012/02/07 09:42:07
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/18 19:34:40
(permalink)
Just remember Gentlemen...there WILL be a sale....there will be a sale..
|
dmbaer
Max Output Level: -49.5 dBFS
- Total Posts : 2585
- Joined: 2008/08/04 20:10:22
- Location: Concord CA
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/10/19 15:23:58
(permalink)
cclarry
Just remember Gentlemen...there WILL be a sale....there will be a sale..
If history is any guide, there won't be a sale of this effect individually. There probably will be a 25% off bundle sale near the holidays. The only individual effect I've ever seen on sale by FF is Timeless 2, possible to counter the release of FXpansion's Bloom super-delay.
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: FabFilter Pro-MB | Oct 17 Release
2013/11/02 09:49:41
(permalink)
$137.40, No-Brainer!
Why would you "need" the Pro-MB, the same reason you "need" anything Fab Filter;
its the "best" at what it does!
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|