The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/13 15:33:29
(permalink)
I think it's more correct to think in terms of your opinion and their opinion and leave the "the best" part out of it. I also think it is not worth while to worry about whether or not your name will be associated with something that doesn't reflect your personal opinion. If you have got your own two feet well grounded and you know your self there is hardly anything to think twice about. Help people as you can and let them have free reign to make their own decisions about their art. That's the spice of life. IMO, a reputation for being helpful will garner you plenty of work to keep you busy and feeling fulfilled. best regards, mike
|
Dingleberry
Max Output Level: -90 dBFS
- Total Posts : 27
- Joined: 2013/03/08 11:41:00
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/13 15:40:33
(permalink)
mike_mccue I think it's more correct to think in terms of your opinion and their opinion and leave the "the best" part out of it. I also think it is not worth while to worry about whether or not your name will be associated with something that doesn't reflect your personal opinion. If you have got your own two feet well grounded and you know your self there is hardly anything to think twice about. Help people as you can and let them have free reign to make their own decisions about their art. That's the ****e of life. IMO, a reputation for being helpful will garner you plenty of work to keep you busy and feeling fulfilled. best regards, mike
Bingo! the above, I think is a good way of approaching this subject. JMHO
|
Randy P
Max Output Level: -44.5 dBFS
- Total Posts : 3070
- Joined: 2006/11/17 11:02:45
- Location: smokin with the boys upstairs....
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/13 16:45:21
(permalink)
I'd suggest trying a little smooth tact, and ask them as a group or individually, what band or bands "sound" is what they are after. They've obviously heard this sound they want somewhere else. Have them bring it in, or find out where you can listen to it. It could be that the retro sound they want, and what they are describing to you, are two completely different things. This might be something that commonly happens in a recording atmosphere, and that's a communication issue Randy
http://www.soundclick.com/riprorenband The music biz is a cruel and shallow money trench,a plastic hallway where thieves & pimps run free and good men die like dogs. There's also a negative side. Hunter S. Thompson
|
The Band19
Max Output Level: -47.5 dBFS
- Total Posts : 2795
- Joined: 2012/05/29 19:21:32
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/13 22:17:41
(permalink)
"When you and the performers can't hear the same thing"Depends on how much you need the customer/money. Normally I would start with, I'm the recording engineer, and you should trust more in my knowledge, wisdom and experience "in this studio?" And if that doesn't work say "let me show you the door..." If they want low-fi that bad, give them a small condenser and a tape deck and say "have at it."
Sittin downtown in a railway station one toke over the line.
|
Middleman
Max Output Level: -31.5 dBFS
- Total Posts : 4397
- Joined: 2003/12/04 00:58:50
- Location: Orange County, CA
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/14 02:58:28
(permalink)
rsp@odyssey.net I'd suggest trying a little smooth tact, and ask them as a group or individually, what band or bands "sound" is what they are after. They've obviously heard this sound they want somewhere else. Have them bring it in, or find out where you can listen to it. It could be that the retro sound they want, and what they are describing to you, are two completely different things. This might be something that commonly happens in a recording atmosphere, and that's a communication issue I think this is the best solution and one I have used. Prior to recording, I ask the band to bring me 3-4 examples of what they consider close to the sound they're looking for. This becomes the baseline for future communication and it's Ok to morph into something else but when weird requests like too much delay come in, you can reference them back to the examples for say a "dry" vocal or LCR panning or too much effects. Despite creativity there are some baseline approaches/minimum bar things that need to be right in a mix. Many times when a group requests excessive delay or reverb, it's because the singer is not that good and it covers their ability to hold to a key. It also gels the sound but not always in a pleasing way and can mask a multitude of sins but sound non professional. All that said, if you can gain the trust up front and offer to guide them along the way it can be a learning experience for the band. Sharing your thoughts and approach and showing them how it compares to other professional recordings makes it a team building experience versus the engineer vs. the musicians exercise.
post edited by Middleman - 2013/11/14 10:13:31
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/14 07:04:55
(permalink)
I Have found it is easy to convey these sorts of ideas to a solo artist, but when you are working directly for a band, it gets really hard to convey these ideas to the "band." I think that is because a band is a conglomeration of ideas and attitudes and you can't effectively change the "band" without tilting the internal balance that they have at the present. When you are working for a 3rd party investor and simply assigned to help the band it's much easier to coax the band into accepting outside ideas. The band knows they are working for someone and you have been assigned to help by the same investor. When you are working for the band, especially if the mismatch in ideas is meant to cover up a weak spot in the band, it becomes very difficult to seem helpful if you are actually highlighting issues that they have learned to ignore, tolerate, or avoid resolving. That is not a lot of fun and it isn't what the "band" is paying you to do... although one or two members may be indicating that this is what they want you to do. When you work for a solo artist it is a lot easier to coax them to make a retake, or abandon a bad trip and start over. It is a lot easier to establish a trust because you can do it privately and show them ways to make their presentations better without any of the baggage that spills out when you tilt the balance of a "band" of collaborating musicians. I'm not saying I have answers, but I have observed that older established bands are easier to make happy and younger ambitious bands are often times unprepared to make the hard decisions. The thing is, often times, the younger bands can expand your personal *vision* and the way you hear things so I prefer to err on the side of letting them have what they say they want even if it's not what they want because if you make a mistake of not recognizing their artistic intent and err in the other direction you miss out on learning the best of the fresh new ideas. best regards, mike
|
Guitarhacker
Max Output Level: 0 dBFS
- Total Posts : 24398
- Joined: 2007/12/07 12:51:18
- Location: NC
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/14 08:33:22
(permalink)
Some good compromise ideas here... 2 mixes is one good idea....... ......and I like Randy's idea of having them bring an example of what they want....hearing it would clarify what they really mean as opposed to them setting in the studio trying to describe it. And it may actually be closer to your mix when they hear them side by side.... have fun.
My website & music: www.herbhartley.com MC4/5/6/X1e.c, on a Custom DAW Focusrite Firewire Saffire Interface BMI/NSAI "Just as the blade chooses the warrior, so too, the song chooses the writer "
|
Danny Danzi
Moderator
- Total Posts : 5810
- Joined: 2006/10/05 13:42:39
- Location: DanziLand, NJ
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/14 14:38:08
(permalink)
☄ Helpfulby John T 2013/11/14 20:33:24
mike_mccue I Have found it is easy to convey these sorts of ideas to a solo artist, but when you are working directly for a band, it gets really hard to convey these ideas to the "band." I think that is because a band is a conglomeration of ideas and attitudes and you can't effectively change the "band" without tilting the internal balance that they have at the present. When you are working for a 3rd party investor and simply assigned to help the band it's much easier to coax the band into accepting outside ideas. The band knows they are working for someone and you have been assigned to help by the same investor. When you are working for the band, especially if the mismatch in ideas is meant to cover up a weak spot in the band, it becomes very difficult to seem helpful if you are actually highlighting issues that they have learned to ignore, tolerate, or avoid resolving. That is not a lot of fun and it isn't what the "band" is paying you to do... although one or two members may be indicating that this is what they want you to do. When you work for a solo artist it is a lot easier to coax them to make a retake, or abandon a bad trip and start over. It is a lot easier to establish a trust because you can do it privately and show them ways to make their presentations better without any of the baggage that spills out when you tilt the balance of a "band" of collaborating musicians. I'm not saying I have answers, but I have observed that older established bands are easier to make happy and younger ambitious bands are often times unprepared to make the hard decisions. The thing is, often times, the younger bands can expand your personal *vision* and the way you hear things so I prefer to err on the side of letting them have what they say they want even if it's not what they want because if you make a mistake of not recognizing their artistic intent and err in the other direction you miss out on learning the best of the fresh new ideas. best regards, mike Good post, Mike. To be honest, I don't think anyone will be able to nail this with one solid "way to go about it" because of all the variables involved. Most well-seasoned bands would never make rookie mistakes like being too effected, buzzy or to the point of literally degrading the sound to "bad" in an un-artistic way. I'm "assuming" there, so we can take that speculation with a grain of salt. But most times, the younger bands can play and write yet don't have a clue about the production aspect. You can tell in under 5 minutes whether they are trying to make an artistic statement or they're just plain clueless. So I think we have to also take heed of the obvious and maybe not give them the benefit of the doubt in THIS particular scenario. The issues John pointed out to us *could be* artistic, but from my own personal understanding of what he's given us without hearing it, it sounds like a client that just doesn't understand what goes on in the studio. Another example is what Ben mentioned about the Sex Pistols. To me that band was raw and in your face, but the production didn't degrade the music to the point of ruining the material. This is a good example of artistic where as the way John explained his situation, it sounded more like noise, degradation, hiding/covering up the mix....or the guys simply not knowing what or how to listen when in the studio. In this situation, a meeting of the minds is always a good way to initiate communication. For example, when I'm in a situation like this, I always do my best to let the band run wild until they need to be reeled in. As you said, these bands CAN and HAVE expanded me in so many ways, it's actually amazing. So I'd never want to take away from their craft. I go into everything with an open mind and even if I don't like something, will only comment if I'm asked and even then, I'll reply with "are you really sure you want my take?" However, being in this business a super long time as well as having really good communication skills with my clients and knowing a little bit about music and production, I can easily read between the lines when something is artistic and when something may be "wtf". I even allow experimentation and will be the first to jump on something new. But we have to give ourselves credit as engineers too. Sort of like in business where the old saying is "the customer is always right"? I've never agreed with that statement and actually have a thing on the wall that says "don't give me that customer is always right sh!t pal because it holds no power here!" LOL! My point in saying that is, it's like I mentioned to Ben. When something is good, we can lo-fi it, analog it, process it, add some drive or saturation for "effect" purposes. When it enters the mix as sonic noise in a bad way that degrades a mix and most of all, the impact of the song, you have to draw the line on where artistic and catastrophic meet. LOL! And though some may disagree on the whole name credibility thing, it depends on where you are in your business. If you do side jobs, you're probably not as concerned with word of mouth. When you're in a situation like me, the last thing you want to hear from the grapevine is "that album you did for so and so....the band and everyone else has been talking about it and thinks it was horrible." Some can let that roll off their backs...but I sure can't. If I knew the album was bad and I just did it to please the client for the sake of a pay check, I did them a disservice and I can't live like that nor can I run my business that way. I'd rather walk from the job over being a button pusher for money. I've made my money thank God, so though this is one of my main sources of income, I do it feeling great about every job I've ever done as well as going all out to accommodate every client I've ever had. When that project leaves me, we both gave it the nod of approval or it doesn't leave. If someone passes around the grapevine that it sucks, to me that becomes hearsay because I know I did the best I could with what and who I had to work with, ya know? I don't allow people to make decisions for me that make me sick inside. I've walked from more jobs like that than I can even mention and honest when I tell you, I'm glad to have the power to do that. So when I'm asked what my opinion is, I don't hold back and speak my mind...without annihilating anyone of course. But I show them what's wrong, tell them what could be done to fix it, and offer to show them what my vision is. Whether the above is right or wrong for my particular business practice, I feel fantastic running the business I run and never have any regrets. If they want my advice, they get it ten-fold. If they want to do their own thing, they can do that until it starts to sound like someone fell down the steps or there's a train-wreck somewhere. If they don't like my way of handling things, I have no problem having them pay what they owe and then releasing the wave files so they can go to someone that will further ruin their material for them. At least I can sleep at night. :) -Danny
post edited by Danny Danzi - 2013/11/14 14:41:35
My Site Fractal Audio Endorsed Artist & Beta Tester
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/14 21:35:37
(permalink)
Some excellent advice in this thread, thanks. I'm going to offer some advice back: those of you who have thrown in some variant of "tell those guys they don't know what they're talking about and then show them the door" need to check yo selves before you wreck yo selves. This is a reputation-based trade that we're in. Reputation on skill, reputation on time keeping, on getting things done, reputation on not being an ignorant rude jack-ass. The last of those four being nowhere near the least. Try being a working sound engineer with a reputation around town for dissing musicians and see how far you get. This band is a good band. More importantly, a good band made up of really nice, cool people, who apart from the not-getting-it problem we're having, which is a mutual, cuts-both-ways thing, are an absolute pleasure to work with. I've got zero desire or need to disrespect them or their music in any way. I'd like to help them make it better, is all.
post edited by John T - 2013/11/14 21:36:59
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/14 21:39:59
(permalink)
Particular thanks to Danny and Jeff, who have brought their reliably wise counsel to the table. Also agree with Randy, re: reference points. I actually already did that, but it kind of highlighted the problem: there's a bit of a gap between what they actually sound like and what they think they sound like. They're not inferior to what they think they are, but they are different.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/15 07:45:52
(permalink)
Many great performing musicians rarely get a chance to hear what their ensemble sounds like from an audience perspective. They actually hear the music they make differently than the audience does. They hear "stage" sound... even in the practice hall. As the band gets more experienced they gather glimpses of what they actually sound like and eventually they learn to place their sound in the care of someone who has the advantage of working from a vantage point where they can actually hear the band as a whole. In the mean time it can be a struggle for them to reconcile what they have been hearing as performers with what they hear when they get to play the part of the audience vis-a-vis listening to recordings of what they sound like. This is a perfectly natural process in the journey of learning to make recordings. I think that is the reason why playing them example songs or asking for their favorite examples usually doesn't solve the communication mismatch. They are used to hearing different stuff than the audience hears and it takes a lot of experience to reconcile that. I like being gentle when that happens. Good luck. best regards, mike edit spelling
post edited by mike_mccue - 2013/11/15 09:50:08
|
Danny Danzi
Moderator
- Total Posts : 5810
- Joined: 2006/10/05 13:42:39
- Location: DanziLand, NJ
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/15 13:21:31
(permalink)
☄ Helpfulby John T 2013/11/15 23:00:54
John T Some excellent advice in this thread, thanks. I'm going to offer some advice back: those of you who have thrown in some variant of "tell those guys they don't know what they're talking about and then show them the door" need to check yo selves before you wreck yo selves.
This is a reputation-based trade that we're in. Reputation on skill, reputation on time keeping, on getting things done, reputation on not being an ignorant rude jack-ass. The last of those four being nowhere near the least. Try being a working sound engineer with a reputation around town for dissing musicians and see how far you get.
This band is a good band. More importantly, a good band made up of really nice, cool people, who apart from the not-getting-it problem we're having, which is a mutual, cuts-both-ways thing, are an absolute pleasure to work with. I've got zero desire or need to disrespect them or their music in any way. I'd like to help them make it better, is all.
Well said. You find out who really owns a business that is successful and who may have a studio that is for side jobs or the hobbyist approach based on the answers. Reputation is so important...no one realizes this until they walk in our shoes. Having a day gig that pays well doing something else and running a studio for your head or for a little side work doesn't count like it does for guys like John and I. In this economy, praises from clients to the outside world instantly help to gain trust from strangers based on recommendations their friends make. Not to mention, people will pay a little more for someone that goes that extra mile. :) -Danny
My Site Fractal Audio Endorsed Artist & Beta Tester
|
Danny Danzi
Moderator
- Total Posts : 5810
- Joined: 2006/10/05 13:42:39
- Location: DanziLand, NJ
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/15 13:23:35
(permalink)
☄ Helpfulby John T 2013/11/15 23:00:48
John T Particular thanks to Danny and Jeff, who have brought their reliably wise counsel to the table. Also agree with Randy, re: reference points. I actually already did that, but it kind of highlighted the problem: there's a bit of a gap between what they actually sound like and what they think they sound like. They're not inferior to what they think they are, but they are different.
You're quite welcome. We're all here for each other. I know you pretty much had all the answers and knew what you were going to do ahead of time. BUT...it sure does help to vent or bounce a few questions off of us just for the re-assurance part. Good luck with everything John...those guys are lucky to have you on their side. :) -Danny
My Site Fractal Audio Endorsed Artist & Beta Tester
|
Randy P
Max Output Level: -44.5 dBFS
- Total Posts : 3070
- Joined: 2006/11/17 11:02:45
- Location: smokin with the boys upstairs....
- Status: offline
Re: When you and the performers can't hear the same thing
2013/11/15 14:51:54
(permalink)
☄ Helpfulby John T 2013/11/15 23:10:57
Danny Danzi
John T Particular thanks to Danny and Jeff, who have brought their reliably wise counsel to the table. Also agree with Randy, re: reference points. I actually already did that, but it kind of highlighted the problem: there's a bit of a gap between what they actually sound like and what they think they sound like. They're not inferior to what they think they are, but they are different.
You're quite welcome. We're all here for each other. I know you pretty much had all the answers and knew what you were going to do ahead of time. BUT...it sure does help to vent or bounce a few questions off of us just for the re-assurance part. Good luck with everything John...those guys are lucky to have you on their side. :) -Danny
Well, I rarely disagree with Danny, but we are not all here for each other. I'm here on the off chance Punky Meadows will stop by, see my brilliant advice, and want to hang out. Nothing more! Randy
http://www.soundclick.com/riprorenband The music biz is a cruel and shallow money trench,a plastic hallway where thieves & pimps run free and good men die like dogs. There's also a negative side. Hunter S. Thompson
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 00:37:00
(permalink)
I want to throw in a little PS to this thread.
It's 5 am, and I've just finished an overdub session with another band, who are best described as "When you and the performers are totally on the same page and rocking it with no doubts".
It's an interesting contrast. When you've got a bunch of people who know what they're going for, you can deliver it for them fairly easily. It almost becomes just a matter of pointing the microphones the right way.
This band were so good at performing and delivering, and so clear about what they wanted to sound like, it was perversely easy. They've made me sound like a genius engineer, simply because you'd have to be the worst engineer of all time to mess this gig up. About 50% of the job was pressing REC and going outside for a smoke.
As you might guess, these were slightly older more seasoned guys. Not old old. The tricky band are about average age 22, the easy band are about average age 26. And man, there's a world of difference there.
It's weird. The first band have agonised and agonised over small details. And I had to work really hard to get any of it working at all, and moreover, to get everyone feeling OK about it.
This other band are all "John, we love you, this is amazing". And I've hardly had to do anything to get the takes down. Aside from a little bit of sensible tracking technique, I've really not done much at all. Microphones pointing the right way, everyone making the sound they intend to make. Simple as that. Doesn't matter how many times it happens, it's always kind of a revelation.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
Jeff Evans
Max Output Level: -24 dBFS
- Total Posts : 5139
- Joined: 2009/04/13 18:20:16
- Location: Ballarat, Australia
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 01:32:23
(permalink)
I have always believed that when a band is great our job as engineers is incredibly easy and I agree with everything you have said in this post John. It seems to me that the other band that you thought were great are not so great at all in fact. Now you have encountered a much better band where they are all on the same page it is just so much easier and better. Great bands don't agonise over stupid details, they just get down to it and play and play incredibly well. It is so good it is ridiculous in fact. I have just mastered a Jazz album featuring probably the finest players here in Australia. Unbelievable piano player, drummer, bass player sax player and female singer so good it was incredible. The mix was great and I know the mix engineer did not have to do anything to get it in fact. The mastering was so easy I almost feel embarrassed about the amount of money I charged and how long it took. Reason, the quality of the band. When you encounter great playing at any age it is totally different and on another level again. I audition bands before I will even consider recording them. I have a pretty high standard to get over. If they are not up to it I just say no. I only record the type of band you have just described now. Sure it means maybe less jobs but they are usually great, easy and very enjoyable. It also means every job I do sounds killer and that is good for me as well. People rave about my production but what they are really hearing is the band, not the production. In fact good production is when it almost goes out of view just exposing the band for what it is. People rave about the amazing engineering from the past. Floyd, Beatles, Steely Dan you name it. But the fact is any of us could have done the same thing. It is the greatness of the musicians that shines through. And that is why I almost get mad when I hear people on the forum going on with so much silly stuff about 64 bit processing, mics and preamps, outboard gear, all useless if the band cannot play. But what happens when the band or the artist can play. All the gear and technology just disappears into oblivion. Greatness in musicianship and delivery seriously overpower all the technology involved from that point on. Always has been that way and still is. Sure it nice when you have both, that is even better but if it is only one I will go with the musicianship first everytime. Sorry for the rave but excited for you John having experienced this. It throws a different perspective on things.
post edited by Jeff Evans - 2013/12/06 01:46:35
Specs i5-2500K 3.5 Ghz - 8 Gb RAM - Win 7 64 bit - ATI Radeon HD6900 Series - RME PCI HDSP9632 - Steinberg Midex 8 Midi interface - Faderport 8- Studio One V4 - iMac 2.5Ghz Core i5 - Sierra 10.12.6 - Focusrite Clarett thunderbolt interface Poor minds talk about people, average minds talk about events, great minds talk about ideas -Eleanor Roosevelt
|
Danny Danzi
Moderator
- Total Posts : 5810
- Joined: 2006/10/05 13:42:39
- Location: DanziLand, NJ
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 02:39:13
(permalink)
John T I want to throw in a little PS to this thread.
It's 5 am, and I've just finished an overdub session with another band, who are best described as "When you and the performers are totally on the same page and rocking it with no doubts".
It's an interesting contrast. When you've got a bunch of people who know what they're going for, you can deliver it for them fairly easily. It almost becomes just a matter of pointing the microphones the right way.
This band were so good at performing and delivering, and so clear about what they wanted to sound like, it was perversely easy. They've made me sound like a genius engineer, simply because you'd have to be the worst engineer of all time to mess this gig up. About 50% of the job was pressing REC and going outside for a smoke.
As you might guess, these were slightly older more seasoned guys. Not old old. The tricky band are about average age 22, the easy band are about average age 26. And man, there's a world of difference there.
It's weird. The first band have agonised and agonised over small details. And I had to work really hard to get any of it working at all, and moreover, to get everyone feeling OK about it.
This other band are all "John, we love you, this is amazing". And I've hardly had to do anything to get the takes down. Aside from a little bit of sensible tracking technique, I've really not done much at all. Microphones pointing the right way, everyone making the sound they intend to make. Simple as that. Doesn't matter how many times it happens, it's always kind of a revelation.
Great post John and an excellent "P.S." This drives my point home to people when I say "you don't have to work on eqing sounds for days when you have the right sounds and the right players." There really isn't much more to do other than press record. The material seems to mix itself and when you add in good players, you're not sitting there messing with compression settings and trying to polish a turd whilst worrying about details that no one will notice or even care about. What you've experienced here is how it is in the big leagues for the most part unless they have to work with one of those artists that have substituted the word "unique" for the word "greatness" as a cover up. I hope every engineer gets to experience this many times because it really does make you enjoy what you do so much more. It's sort of like the girl you date that is the beast from hell for 5 days...but on the weekends, she turns into this unbelievable gal that makes those 5 days of hell worth it. LOL! :) Don't get me wrong, we all like a challenge band to come in once in a while. But when the challenge part exceeds the talent and the reason for the band to be in existence, that's when it gets to be a drag really fast. In a sense I sort of miss that at times but then I think back on the times where I was so frustrated I wanted out....and it makes me feel happy to have paid my dues to where I can be more selective as to who I work with. But I have to say, quite a few of those challenging bands helped me to get where I am due to them pushing me over the edge. :) Glad to hear you have one that's allowing you to really enjoy what you do. -Danny
My Site Fractal Audio Endorsed Artist & Beta Tester
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 08:06:33
(permalink)
:-) I think one of the great advantages of starting out by sweeping floors, and hauling gear in and out, where the big boys and girls play and work is that you witness this first hand and realize that bands and staff can and do move forward without agonizing over silly stuff. Indeed, one of the primary reasons I don't spend 100% of my time working with musicians is that I enjoy working with easy to work with musicians 99% of the time I choose to do so. Working with happy musicians leaves you in a position where the odd occasion of working with people that are not able to be satisfied doesn't effect your big picture. :-) Oh and another thing; experiencing great music made with immediacy leaves a person like me suspecting that the myriad of interviews with engineers, producers and musicians who describe how they had to put out 29 mics on 7 guitar cabinets while using a measuring tape to get that perfect sound are just doing it all for the purpose of entertainment (and accounts receivable) rather than a sincere commitment to sonic craftsmanship. best regards, mike
|
spacey
Max Output Level: 0 dBFS
- Total Posts : 8769
- Joined: 2004/05/03 18:53:44
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 08:56:49
(permalink)
Buddy Holly apparently had the easy solution. I like the idea of a band having somebody in it that knows how the band sounds and how to capture it. Avoids many issues.
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 12:49:23
(permalink)
Everyone's tastes are different and not everyone is thinking "commercial success" when they express their sound desires. Kurt Cobain hated the production on "Nevermind" - he called it "candy-ass." But to me it's a great sounding record, and the record buying public obviously thought so too. However, its commercial success didn't change his opinion of it. I'd definitely want to hear other examples of the genre in question (if they even have a definable genre). For some genres, a lo-fi sound is part and parcel of the experience. But that doesn't mean it can't be done well. Take Boards of Canada - the output from their heyday is purposefully lo-fi in some ways. They recorded to tape over and over, lots of wow and flutter etc, and the portrait they were trying to paint was "nostalgia." There are some here I know who hate this obsession with sounding retro and analog, but I think if it's done well then it sounds great. Their newest release has all but lost that vibe and they're now being panned for sounding too slick. I agree, but then again it's the content of their music that's gone downhill as well. I don't know if the one had anything to do with the other, but despite the excellent production quality of their latest record, it sounds very bland to me. There's other music I love that sounds less than hi-fi, or at least part of it does. The bass on Radiohead's "Knives Out" sounds like it's coming from next door. But in a great way that suits the song. DJ Shadow's "Entroducing" from 1996 is decidedly lo-fi but is considered probably the best instrumental hip-hop album of all time. There's no way a professional engineer would have let it come out sounding like that. But the style is just one man, some vinyl records and a lo-fi sampler, and his fans wouldn't have it any other way.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
Danny Danzi
Moderator
- Total Posts : 5810
- Joined: 2006/10/05 13:42:39
- Location: DanziLand, NJ
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 13:57:07
(permalink)
sharke There are some here I know who hate this obsession with sounding retro and analog, but I think if it's done well then it sounds great. Their newest release has all but lost that vibe and they're now being panned for sounding too slick. I agree, but then again it's the content of their music that's gone downhill as well. I don't know if the one had anything to do with the other, but despite the excellent production quality of their latest record, it sounds very bland to me. There's other music I love that sounds less than hi-fi, or at least part of it does. The bass on Radiohead's "Knives Out" sounds like it's coming from next door. But in a great way that suits the song. DJ Shadow's "Entroducing" from 1996 is decidedly lo-fi but is considered probably the best instrumental hip-hop album of all time. There's no way a professional engineer would have let it come out sounding like that. But the style is just one man, some vinyl records and a lo-fi sampler, and his fans wouldn't have it any other way. *Raises hand for hating retro and analog* LOL! BUT, only because the people attempting this that aren't in the big leagues....are failing miserably. Audio is being ruined as is with people not knowing what they are doing....add in bad retro and analog sim that is the furthest from analog and you have a cluster of "uggh". I actually love all that stuff when it's done right. But unless someone literally records on tape with the right stuff that makes it analog and retro, you're left with a cheap imitation of I don't know what. Or, you get Dave Grohl's "analog" album attempt that made me throw up in my own mouth because he wound up trying to take a poorly recorded analog album and hybrid digital or whatever he did. That said, it matters not in his case because the guy is a songwriting machine loaded with hits. But others doing this....if the music isn't appealing like you mentioned about Boards of Canada sort of losing it in the content area and you find out no form of production can save you in that situation. The other side of that coin is...when a band comes out sounding a certain way, if people buy into it....it's nice if the band keeps that sound for a few albums as to not shell-shock their audience. If you look at the bands that have been successful over the years, it's rare they tried to re-define the face of music and stayed afloat. Think about bands with longevity that sort of gave you the same sound with different songs for 5 or more albums. When they changed, they often times sank and were never heard from again. Or...sometimes the change was at the right time with the right lot of songs and it made them bigger. Case in point, Aerosmith. They would have never had success like they had in the 70's if they wouldn't have had Run DMC bring them back to life....and then the production for Perm Vacation and Pump being a major factor. It was the right time for them...a totally classic rock sounding retro album would have killed them for life I believe. I think anything is acceptable though sharke, as long as things are done for the right reasons with the right band playing the right songs at the right time. Though that seems like a lot to think about for a record....the truth of the matter is, when you have all those things in alignment...the songs could entail people farting in harmony. If people are ready for something like that, it's a success. :) -Danny
My Site Fractal Audio Endorsed Artist & Beta Tester
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 14:09:39
(permalink)
Yeah well I think with the retro thing the problem is that you'll get one or two people who do it well and make a success of it, then a thousand copycats who try to emulate that sound and just make a pig's ear of it. Like these people throwing heavily detuned synths on all their tracks because they want to sound like Aphex Twin...and instead of sounding phat it just sounds...well...out of tune.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
Danny Danzi
Moderator
- Total Posts : 5810
- Joined: 2006/10/05 13:42:39
- Location: DanziLand, NJ
- Status: offline
Re: When you and the performers can't hear the same thing
2013/12/06 15:18:49
(permalink)
sharke Yeah well I think with the retro thing the problem is that you'll get one or two people who do it well and make a success of it, then a thousand copycats who try to emulate that sound and just make a pig's ear of it. Like these people throwing heavily detuned synths on all their tracks because they want to sound like Aphex Twin...and instead of sounding phat it just sounds...well...out of tune.
Yes!!! That ^ there is definitely the problem! I agree so much with this I was just pumping my fist in the air yelling "hell yeah sharke!" Hahaha! In that light, it's easy to see/hear why someone like me might have a problem with some of the more retro or analog sounding stuff. But like we said, it really depends on the situation. There's nothing like a lo-fi synth done right with that little bit of sizzle distortion. An analog guitar tone is to die for when done right....vocals are nice and warm, a bass can have way more identity. BUT...then we can list the opposites as well because there are things in the digital realm that accentuate things differently. I think it's great we have the tools to do what we can do and everything should always be taken into consideration. We just have to hope that when someone goes for these types of sounds, that they do the material justice. Not to change gears drastically, but I think Mike also touched on a really great thing in his post: "experiencing great music made with immediacy leaves a person like me suspecting that the myriad of interviews with engineers, producers and musicians who describe how they had to put out 29 mics on 7 guitar cabinets while using a measuring tape to get that perfect sound are just doing it all for the purpose of entertainment (and accounts receivable) rather than a sincere commitment to sonic craftsmanship." This to me also discredits engineers that get bragging rights a bit too easily and rightfully so. I did an interview with a friend of mine who some may know....I can always share it if anyone is interested, but I had the privilege of meeting and befriending producer/engineer Beau Hill years ago and the things he had to say made what Mike said even more apparent. You could mic up certain players with a Pignose amp and they still sounded fabulous, yet some engineers get way more credit than they deserve. When the band is on fire, you have the right players and at least *some* clue about recording, you're going to have great results every time. With that said, if the band has a big name already, you me or anyone else could probably record and mix this band and become famous producers. Granted, I know some of these guys have really paid their dues. But others...you know it was a "who you know and who you [link=mailto:bl@w"]bl@w"[/link] type deal. I can rattle off 8 names off the top of my head where I sincerely do not believe performed any magic tricks to get the credibility they got. How do you ruin a big name artist or band? You don't...they ruin themselves with poor songs that lose their following really. Metallica is a prime example. We heard more people bash on the St. Anger album than any metal album I can think of. It still sold, the band isn't dead and their die hard fans love them. I didn't like the quality of St. Anger (I'm not even a Metallica fan and don't really care for them but they have their place) but the songs were pretty good considering how poorly produced and mixed they were. At the end of the day, no matter what the style, unless the production of a song is so bad it literally ruins the listening experience, you won't go wrong with a good performance, good players and good songs. If you have a good name in the business, you have even more of a chance of being accepted unless the songs tank. You see how some of those cult type bands just keep on surviving. I think that's a good thing really. A band should be able to do anything they want with artistic flair involved. But the one thing I DO wish for...is for bands/artists to at least keep good fidelity in the mix. Not to be confused with lo-fi situations. I'm saying...give us the best ear candy possible that best allows a band to be themselves without totally degrading the sound to where it is just pure noise. The bands also need to take a bit more time before they just release something. There are more filler songs today than ever before. Though I've always had a problem with that sort of thing, I've accepted it knowing how tough schedules can be. But we need to definitely give the music business some class again to where people are at least a little more concerned with what I call "musical hygiene". :) -Danny
post edited by Danny Danzi - 2013/12/06 15:20:09
My Site Fractal Audio Endorsed Artist & Beta Tester
|