Proper Aud.ini ThreadSchedulingModel for X3c Producer

Author
rkl122
Max Output Level: -85 dBFS
  • Total Posts : 262
  • Joined: 11/6/2003
  • Location: NJ
  • Status: offline
December 04, 13 1:38 PM (permalink)

Proper Aud.ini ThreadSchedulingModel for X3c Producer

I've installed X3cP with X1P installed.  My aud.ini had the following line carried over (I remarked it to record that it was a manual change I'd made):
 
;Changed following value from 1 to 2 per hint for multicore on forum.
ThreadSchedulingModel=2
 
I'm running Win7 x 64 with the following processor:
2.67 gigahertz Intel Core i7 920
Multi-core (4 total)
Hyper-threaded (8 total)

 
Any informed opinion as to the optimal setting for that parameter in X3?  I've been getting X3c crashes just looking at new features (on an X1 project).  By no means blaming the software, just need to optimize configuration.  Would rather try single mods before permitting X3 to simply generate a new aud.ini.  Or is it no big deal to allow it to do so?
 
Thx, Ron
#1

2 Replies Related Threads

    stevec
    Max Output Level: 0 dBFS
    • Total Posts : 11546
    • Joined: 11/4/2003
    • Location: Parkesburg, PA
    • Status: offline
    Re: Proper Aud.ini ThreadSchedulingModel for X3c Producer December 04, 13 3:24 PM (permalink)
    I would just copy your existing aud.ini to a separate folder and allow X3 to generate a new one.  That way you can directly compare the two if needed.
     

    SteveC
    https://soundcloud.com/steve-cocchi
    http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163
     
    SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors;
    Focusrite 18i6 (ASIO);
    Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
     
    #2
    Splat
    Max Output Level: 0 dBFS
    • Total Posts : 8672
    • Joined: 12/29/2010
    • Location: Mars.
    • Status: offline
    Re: Proper Aud.ini ThreadSchedulingModel for X3c Producer December 05, 13 2:20 AM (permalink)
    Agreed. Online help f1 should be of help as well. And please disable 64 bit precision engine until X3D arrives.

    Sell by date at 9000 posts. Do not feed.
    @48/24 & 128 buffers latency is 367 with offset of 38.

    Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1