How Can I Change Behavior during recording with Lanes?

Author
Post
Essentials Only Full Version
Keni
Max Output Level: -17.5 dBFS
  • Total Posts : 5769
  • Joined: 2003/11/04 10:42:15
  • Location: Willits, CA USA
  • Status: offline
2013/12/06 14:22:02 (permalink)

How Can I Change Behavior during recording with Lanes?

This is becoming a pain and I'm hoping there's a switch I can't find...
 
I am in sound on sound mode recording...
I have set up a loop for the area I'm working on and extended both the beginning and the end of the loops to catch the boundry issues...
 
The problem?
 
The section (mostly dead air) that the new recording overlaps gets split and muted.... I don't want that and it's making either a mess or extra work for me to fix after the fact...
 
Is there a switch to change this behavior? I sure hope so....
 
Keni
 

Keni Fink
Keni - Facebook
Deep Space Records
http://www.reverbnation.com/inexile
http://www.cdbaby.com/artist/inexile
Out Of My Head Music (BMI)

SPlat/MacPro/Dual Xeon 3.06GHz 6-core (12 total)/64GB/Win8.1X64/Presonus 1818VSL/Soundscape SS8IO-1
#1

4 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: How Can I Change Behavior during recording with Lanes? 2013/12/06 14:50:11 (permalink)
    Double-check your recording mode. That sure sounds like Comping. And it's a Project setting, so having set Sound on Sound in another project won't be applicable to the current one.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    Keni
    Max Output Level: -17.5 dBFS
    • Total Posts : 5769
    • Joined: 2003/11/04 10:42:15
    • Location: Willits, CA USA
    • Status: offline
    Re: How Can I Change Behavior during recording with Lanes? 2013/12/06 17:22:27 (permalink)
    Thanks brundlefly...

    I have double checked that a number of times before posting as it was my suspect... I was in sound on sound mode in the specific project... But it was doing many anomalous things... I posted one of the (audio on track but not Lane) other issues... Then suddenly, the lanes re-ordered themselves placing Lane 1 on top instead of bottom of the 3 lanes... And was again showing the audio where it shoul be...

    At the same time it started behaving sound on sound again... So something intermittent is going on... I just haven't figured out how to bug this up for a report...

    This project is somewhat bare bones right now (data) having a MIDI track driving SD3, an empty set of tracks setup for the VSampler3 which I use to run my preferred bass, and an audio track with Ampitube 3 which is where these problems are happening...

    I had to break for a client consultation, but I will be back at that puce in an hour or two.... Well see what's going on next...?

    Thanks for jumping in to help as you do so often and well!

    Keni

    Keni Fink
    Keni - Facebook
    Deep Space Records
    http://www.reverbnation.com/inexile
    http://www.cdbaby.com/artist/inexile
    Out Of My Head Music (BMI)

    SPlat/MacPro/Dual Xeon 3.06GHz 6-core (12 total)/64GB/Win8.1X64/Presonus 1818VSL/Soundscape SS8IO-1
    #3
    icontakt
    Max Output Level: -32.5 dBFS
    • Total Posts : 4266
    • Joined: 2012/03/04 08:18:02
    • Location: Tokyo
    • Status: offline
    Re: How Can I Change Behavior during recording with Lanes? 2013/12/06 20:55:46 (permalink)
    When I tested it in my recent thread on Take Lanes, I saw the same behavior and posted a screenshot. I've just run the same test now, but, strangely, it's working fine this time. No splits and no muted clips. I even tried it without extending the beginning and the end of the loops, and both with audio/midi tracks and with a simple instrument track, with input quantize enabled. The only problem I see this time is that I can only hear some of the notes I recorded in previous takes while I'm recording.

    Tak T.
     
    Primary Laptop: Core i7-4710MQ CPU, 16GB RAM, 7200RPM HDD, Windows 7 Home Premium OS (Japanese) x64 SP1
    Secondary Laptop: Core2 Duo CPU, 8GB RAM, 7200RPM HDD, Windows 7 Professional OS (Japanese) x64 SP1
    Audio Interface: iD14 (ASIO)
    Keyboard Controller/MIDI Interface: A-800PRO
    DAW: SONAR Platinum x64 (latest update installed)
    #4
    icontakt
    Max Output Level: -32.5 dBFS
    • Total Posts : 4266
    • Joined: 2012/03/04 08:18:02
    • Location: Tokyo
    • Status: offline
    Re: How Can I Change Behavior during recording with Lanes? 2013/12/06 21:00:32 (permalink)
    brundlefly
    Double-check your recording mode. That sure sounds like Comping.

     
    I believe I mistakenly forgot to switch to the Sound on Sound mode last time.

    Tak T.
     
    Primary Laptop: Core i7-4710MQ CPU, 16GB RAM, 7200RPM HDD, Windows 7 Home Premium OS (Japanese) x64 SP1
    Secondary Laptop: Core2 Duo CPU, 8GB RAM, 7200RPM HDD, Windows 7 Professional OS (Japanese) x64 SP1
    Audio Interface: iD14 (ASIO)
    Keyboard Controller/MIDI Interface: A-800PRO
    DAW: SONAR Platinum x64 (latest update installed)
    #5
    Jump to:
    © 2025 APG vNext Commercial Version 5.1