chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Bus, volume, pan
Sonar x2 producer & latest update. I created 2 bus' and they are working fine. Problem is with the tracks that the bus' point to. Pan and Volume don't work correctly. Pan on the tracks doesn't work at all and the volume barely works. Am I doing something wrong or is the way things work?
Oh, I used Pan on the bus' location to solve that but it seems it should work at the track level to me. Thanks.
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: Bus, volume, pan
2013/12/29 17:56:31
(permalink)
Are you routing the audio to the busses via the track output, or are you doing it via a send?
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Re: Bus, volume, pan
2013/12/29 18:02:08
(permalink)
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|
dubdisciple
Max Output Level: -17 dBFS
- Total Posts : 5849
- Joined: 2008/01/29 00:31:46
- Location: Seattle, Wa
- Status: offline
Re: Bus, volume, pan
2013/12/29 21:16:14
(permalink)
It should work on the track level. Hard to trouble shoot from afar, but here are a couple of things to check for:
1) Any type of effects or processes on the track or bus that alter panning.
2) Any effects or processes that convert from mono to stereo or vice verse.
|
chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Re: Bus, volume, pan
2013/12/29 21:34:20
(permalink)
I have Guitar Rig 5 on the 2 busses and that is it. Thanks for your reply.
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|
dubdisciple
Max Output Level: -17 dBFS
- Total Posts : 5849
- Joined: 2008/01/29 00:31:46
- Location: Seattle, Wa
- Status: offline
Re: Bus, volume, pan
2013/12/29 21:40:24
(permalink)
So odd. is it possible for you to post a screenshot showing the tracks involved?
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: Bus, volume, pan
2013/12/30 00:22:39
(permalink)
Have you enabled stereo within Guitar Rig (make sure both L and R are turned on, just to the left of the input meter)?. It defaults to mono.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Re: Bus, volume, pan
2013/12/30 03:01:58
(permalink)
1st screenshot is track view - 2nd screenshot is busses and master (over tracks view) - 3rd screenshot is of guitar rig 5 Correction: Used guitar rig L&R for stereo but no change. URL for screenshots below. http://charliemcguyer.com/4cakewalk.htm
post edited by chasmcg - 2013/12/30 07:07:36
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|
chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Re: Bus, volume, pan
2013/12/30 15:53:28
(permalink)
Going to bump this one time. Sent an email to support. Called support but wait time was 35 minutes.
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|
SteveStrummerUK
Max Output Level: 0 dBFS
- Total Posts : 31112
- Joined: 2006/10/28 10:53:48
- Location: Worcester, England.
- Status: offline
Re: Bus, volume, pan
2013/12/30 16:17:29
(permalink)
Hi Chas
I might be way off here, but I noticed on your screenshot that the two guitar tracks both contain stereo waves.
From experience, I've sometimes experienced some panning weirdness when I've accidentally recorded stereo audio tracks instead of mono.
Did you record the two tracks in stereo deliberately - in other words, is there different information on each channel?
If you accidentally recorded in stereo instead of mono, try bouncing the two tracks down to mono and see if that solves the problem.
|
chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Re: Bus, volume, pan
2013/12/30 18:03:40
(permalink)
Steve, I converted a couple of the clips to mono but still get the same results. I deleted the buses and afterwards the panning and volume work as they should at the track level.
Then I created a new bus but get the same results as before. So I must be doing something wrong somewhere when I create the bus. Will tinker around some more. Thanks for your reply and suggestions.
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|
chasmcg
Max Output Level: -78 dBFS
- Total Posts : 642
- Joined: 2011/06/09 13:02:27
- Location: Sulphur Springs, TX
- Status: offline
Re: Bus, volume, pan
2013/12/30 18:20:42
(permalink)
Well, I tried another plugin (reverb) instead of Guitar Rig 5 and it works as it should. So it looks like Guitar Rig 5 is the problem. Don't really know why at this point? Will tinker around some more. I am in stereo with GR5. Anyone else have any problems with GR5? Thanks.
chasmcg Windows 10 64 bit - Intel Core I7 7700T - Cakewalk by Bandlab - Focusrite Clarett 2Pre USB - 16 GB Mem DDR4 “The desire for fame is the last infirmity cast off even by the wise” - Tacitus
|