Vlar
Max Output Level: -87 dBFS
- Total Posts : 189
- Joined: 2003/11/11 11:28:16
- Status: offline
Edit single song from live recording
What is the best method or work flow to Edit a single song from an hour long live recording? Is there an easy way to set up FX, busing, etc. for the whole hour long set and then chop out the individual songs to be be tweaked further?
|
Vlar
Max Output Level: -87 dBFS
- Total Posts : 189
- Joined: 2003/11/11 11:28:16
- Status: offline
Re: Edit single song from live recording
2014/01/01 23:19:39
(permalink)
Another way of putting it would be: is there any way to set up all the FX, busing, channel settings, etc. and save to a new project with just one song selected (with all the settings)? It might be called: "Save New Project from Selection".
|
Splat 
Max Output Level: 0 dBFS
- Total Posts : 8672
- Joined: 2010/12/29 15:28:29
- Location: Mars.
- Status: offline
Re: Edit single song from live recording
2014/01/01 23:54:02
(permalink)
Sell by date at 9000 posts. Do not feed. @48/24 & 128 buffers latency is 367 with offset of 38. Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.4,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),4 x Seagate ST31500341AS (mirrored),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5.Maschine Studio+Komplete 9 Ultimate+Kontrol Z1.Addictive Keys,Izotope Nectar elements,Overloud Bundle,Geist.Acronis True Image 2014.
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: Edit single song from live recording
2014/01/01 23:57:05
(permalink)
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
WDI
Max Output Level: -54.5 dBFS
- Total Posts : 2069
- Joined: 2007/08/28 02:31:11
- Status: offline
Re: Edit single song from live recording
2014/01/02 00:55:04
(permalink)
I use markers to denote the songs, then use marker view to move to the markers and use F9 and F10 (Sonar 7) to make the selection and export each song individually. Not sure what the shortcut keys are in X series.
Sonar 7 PE Windows XP Pofessional (SP3) MSI K8N Neo4-F AMD Athlon 64 3500+ 2 GB PC 3200 Ram RME Fireface 800 Edirol FA-66 CM Labs MotorMix Old stuff: ARJO
|
Kalle Rantaaho
Max Output Level: -5 dBFS
- Total Posts : 7005
- Joined: 2006/01/09 13:07:59
- Location: Finland
- Status: offline
Re: Edit single song from live recording
2014/01/02 01:03:47
(permalink)
I split and drag each song to a track of its own and name the track by the song. Then I add on the Master Bus the FX that are common to all songs, and if some song needs FX of its own, I put that in the track FX bin.
Then I export track at a time ( if you export all in one go using "tracks" as source, all the exported songs are as long as the longest one in the project).
SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre - Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc. The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
|
Vlar
Max Output Level: -87 dBFS
- Total Posts : 189
- Joined: 2003/11/11 11:28:16
- Status: offline
Re: Edit single song from live recording
2014/01/02 01:24:02
(permalink)
I'm trying to split out a whole new multi-track project for each song. I'm not sure that's what you are referring to. I know how to export mixes of regions, etc. I guess I could set up the whole hour and then automate the changes for each song, but some of them require quite different treatment. I found an older post where the person who posted would save the project to a new fileneame (the name of the song perhaps), split the tracks at the beginning and end, and then delete the parts outside of the song, sliding the song start to the beginning with "delete hole".
|
Kalle Rantaaho
Max Output Level: -5 dBFS
- Total Posts : 7005
- Joined: 2006/01/09 13:07:59
- Location: Finland
- Status: offline
Re: Edit single song from live recording
2014/01/02 01:35:03
(permalink)
My bad. I'm in the wrong ballpark. I've never had more than two stems in the live recording.
SONAR PE 8.5.3, Asus P5B, 2,4 Ghz Dual Core, 4 Gb RAM, GF 7300, EMU 1820, Bluetube Pre - Kontakt4, Ozone, Addictive Drums, PSP Mixpack2, Melda Creative Pack, Melodyne Plugin etc. The benefit of being a middle aged amateur is the low number of years of frustration ahead of you.
|
Vlar
Max Output Level: -87 dBFS
- Total Posts : 189
- Joined: 2003/11/11 11:28:16
- Status: offline
Re: Edit single song from live recording
2014/01/06 10:57:16
(permalink)
I figured out I can either setup everything for the whole set and automated the changed for each individual song, use markers to just export the mix of each song separately, etc. OR after setting up the common parameters for the whole set, set markers for each song, save the whole project to a new file with the name of the song and delete everything before and after that song, saving again to end up with just the one song as a single project. Do this for each song and you have a separate file for each one.
As I mentioned before, it would be great to have a "Save Selected to New Project" feature which would save all tracks selected between the From and Thru Markers to a new project, complete with all parameters set, or even have options (like audio export) to pick which parameters are saved with the new project. I record many projects with SAW Studio to later be mixed in Sonar and SAW has a similar feature to export the selected region as a new project.
|