joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Session D 3 not looping part A?
Just noticed this today when I went to sample some beats in SD3 - all parts except part A will react to the Loop button...A simply plays the pattern once and stops...an dyes the loop button lit, or highlighted  Can anyone else see if it happens please, before I write off to CW? Thanks
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:12:23
(permalink)
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:18:16
(permalink)
Sorry I thought those who knew SD would understand what I meant...in the Session Drummer VSTi Window...where you insert loops into the slots A-H and then audition them - there is a looping tool to use..which as I wrote works on all parts except a pattern placed into the A slot.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:19:34
(permalink)
I just tried it. It seems to work OK here. Is there a specific program, MIDI loop or formula to replicate the problem. I am using v1.0.0.306 64bit version of the dll, if it matters.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:22:53
(permalink)
Thanks Scook - let me check that.....I am getting 1.0.1.197
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:23:06
(permalink)
Aha.. I was thinking you meant the pattern's row.
As scook says, if you can provide the steps taken, then it's easier for us to test it out.
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:25:13
(permalink)
I only added the version info because I skipped installing SD3 from X3. So there were some updates in X3. Still a more detailed description of the failure would be useful for testing.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:27:44
(permalink)
Not much to explain really - open the VSTi, load a drum kit program, choose a MIDI loop from the library load to slot A and play....that's it...tried Platinum Samples and Groove Monkey so I don't think it's the MIDI loops, especially as all the other parts DO loop....in fact if I press play on A it not only stops after one run of the loop, I cannot then click on another slot until I click the stop button...when testing loops in the other slots I can jump from one to another without it stopping, or needing to stop it.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:45:16
(permalink)
I just loaded the X3 64bit binary for SD3 v1.0.1.197
Loaded the "Smart Loops Groovy Kit" (It was the first one under Acoustic)
The default loop loaded by the program was "6-8 suffle FILL 02 (1 bar).mid"
It looped OK.
I also tested with Groove Monkey clips not included with SONAR. Looped OK.
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:47:54
(permalink)
Seems like some problem, but I'm having the same SD3 version as you, and part A seems to loop normally. Have you tried to load both A and B with same midi pattern, and A does not loop, whereas B loops ?
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:58:03
(permalink)
Joden,
Can you try this. Load the drum kit with (the last group) Rhythm Machine - DrumTraks.prog[27 MB]
By default part A would be loaded as well. Can it loop ?
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 21:59:25
(permalink)
Yeah did that too - might be just a glitch in my version from installation??? It is why I wanted others to test adn for that I am grateful to you both...at least it confirms it is my system...not the VST
BTW - if I run the trialling process via the Loop Explorer view - no probs at all it loops whatever loop I pick...I will stick with that I think....I have never really used the loop explorer before, bit it is rather easy to use...dunno why I have never tried it before!
I will mark the thread solved as in essence it is as via Loop Explorer I can do what I need, and it is only something pertaining to my system.
Cheers
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:03:05
(permalink)
tomixornot
Joden,
Can you try this. Load the drum kit with (the last group) Rhythm Machine - DrumTraks.prog[27 MB]
By default part A would be loaded as well. Can it loop ?
Yes it loops - the program I was loading was Acoustic Platinum Samples Legends kit - but when I re-laoded it again after the Rhythm Machine, again it would not loop part A, but would loop the others - weird....
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:17:02
(permalink)
I can replicate the problem using the "Platinum Samples Legends Kit 3.prog"
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:20:27
(permalink)
Ahhh cool, so it is the kit not the VSTi - thanks Scook  So I guess I should re-direct to their support desk...
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:22:50
(permalink)
I suspect the .prog file. Try loading the instruments separately. It appears to work with the individual sfz files that make up the kit.
|
tomixornot
Max Output Level: -58.5 dBFS
- Total Posts : 1674
- Joined: 2011/03/05 11:31:26
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:25:28
(permalink)
Joden and scook,
Can I have the exalt midi pattern each of you use ? I have all the Platinum Kits for testing it further.
Albert i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram- ADATA 250GB SSD (Boot)- Samsung Spinpoint F1 1TB HDD (Samples)Audio interface : Motu 828 MK ii i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram- Samsung EVO 850 120GB / 500 GB SSD
Audio interface : Roland Quad Capture Win 10 Pro / Sonar Platinum
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:26:46
(permalink)
Thanks m8, good tip I will try that - need to get back to work now, but tonight I will try it.. Thanks again fro your help - AND also to tomixornot much appreciated.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Session D 3 not looping part A?
2014/02/03 22:37:11
(permalink)
I believe I found the issue. The "Platinum Samples Legends Kit 3.prog" has A set to a pattern length of 32 beats. It actually is looping. Try reducing the pattern length value to the right of the MIDI pattern entry.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: Session D 3 not looping part A?
2014/02/04 13:02:51
(permalink)
Thanks Scook - yep that is it - it will loop A with it set up to 10 bars, any more and it stops looping..Something learned and something to look out for in future!
|