zoffmeister
Max Output Level: -87 dBFS
- Total Posts : 183
- Joined: 2004/05/07 07:58:14
- Location: UK
- Status: offline
HELP! New to X3. I can only hear one take lane at a time
Hi I am recording my drum track at the start of my first project with X3. The lanes are working differently to how they did in my previous version. This is a midi track. I am recording my drum track. The first take is my basic Kick and Snare. I am now overdubbing the fills. Later I shall add the hi hats and then the cymbals. These will all be on separate lanes. However, I have just recorded my first fill (a snare hit and two tom hits). I can now only hear either that lane or my initial lane which has Kicks at the same time as my new fill. Why can't I hear both clips? I recorded in Sound on Sound mode. I am not comping here. I want to finish up with four lanes in my drum track. One for Kick and snare, one for toms, one for hats and one for cymbals. Obviously I want to hear them all simultaneously. What am I missing here? There's obviously some new option I have to select that I don't know about. Can't find it. Help please!
SONAR Platinum 1607, Windows 10 Pro, i7 6700K 16GB Ram 3.4Ghz 256GB SSD C: Drive, 525GB SSD VI's, 2TB Audio Drive Interface: UA Apollo Firewire, UAD2 Quad PCIe Mackie Control, C4 and two extenders. Studiologic SL990 Pro keyboard controller
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re: HELP! New to X3. I can only hear one take lane at a time
2014/04/17 11:31:45
(permalink)
Clicking with the Comp tool (Smart tool mode in the lower half of the clip) will make that clip active and mute all others. Select all the muted clips, and unmute with K accelerator key. Note that X3 no longer puts the mute symbol on muted clips, it just grays them.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
zoffmeister
Max Output Level: -87 dBFS
- Total Posts : 183
- Joined: 2004/05/07 07:58:14
- Location: UK
- Status: offline
Re: HELP! New to X3. I can only hear one take lane at a time
2014/04/17 11:40:49
(permalink)
I see. So what you are saying is that if I want to select a clip for any reason I need to be careful not to click in the lower half of the clip otherwise I will mute the others?
SONAR Platinum 1607, Windows 10 Pro, i7 6700K 16GB Ram 3.4Ghz 256GB SSD C: Drive, 525GB SSD VI's, 2TB Audio Drive Interface: UA Apollo Firewire, UAD2 Quad PCIe Mackie Control, C4 and two extenders. Studiologic SL990 Pro keyboard controller
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re: HELP! New to X3. I can only hear one take lane at a time
2014/04/17 12:53:38
(permalink)
Exactly. And if you drag in the lower half, you'll also get the auto-splitting behavior of the Comp tool. If this happens inadvertently, you can heal the splits by sweeping through the whole clip, starting outside its end boundary, with the Comp tool.
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re: HELP! New to X3. I can only hear one take lane at a time
2014/04/17 19:25:58
(permalink)
What Dave said. When comping it's important to watch the cursor since it will change depending on the hot-spot you're currently over.
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
icontakt
Max Output Level: -32.5 dBFS
- Total Posts : 4266
- Joined: 2012/03/04 08:18:02
- Location: Tokyo
- Status: offline
Re: HELP! New to X3. I can only hear one take lane at a time
2014/04/17 20:14:39
(permalink)
And for that reason if you just want to select a clip or clips I recommend right-click dragging on the clip(s).
Tak T. Primary Laptop: Core i7-4710MQ CPU, 16GB RAM, 7200RPM HDD, Windows 7 Home Premium OS (Japanese) x64 SP1Secondary Laptop: Core2 Duo CPU, 8GB RAM, 7200RPM HDD, Windows 7 Professional OS (Japanese) x64 SP1Audio Interface: iD14 (ASIO)Keyboard Controller/MIDI Interface: A-800PRODAW: SONAR Platinum x64 (latest update installed)
|