[Solved] Quirk when exporting audio

Author
Post
Essentials Only Full Version
tagruvto
Max Output Level: -86 dBFS
  • Total Posts : 221
  • Joined: 2003/12/03 17:21:29
  • Status: offline
2014/05/18 12:01:16 (permalink)

[Solved] Quirk when exporting audio

Occasionally this will happen when exporting audio:
 
I "Select All"
 
Go to: "Export Audio"   and Sonar tells me that no audio has been selected.
I then reboot Sonar and perform the EXACT same steps and the audio exports - no problems.
 
Has anyone else experienced this?  Any ideas?

i7-4770 CPU @3.40 GHZ
16.0 GB RAM
Widows 10   64-bit
SONAR Platinum
Focusrite Scarlett 18i20
#1

3 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: Quirk when exporting audio... 2014/05/18 12:23:10 (permalink)
    Ctrl+A and Edit > Select > All with focus on a bus will only select buses in X3, and I believe this goes back to X1. Other than that, Ctrl+A with focus on a track should always get everything, I think.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    Cactus Music
    Max Output Level: 0 dBFS
    • Total Posts : 8424
    • Joined: 2004/02/09 21:34:04
    • Status: offline
    Re: Quirk when exporting audio... 2014/05/18 12:52:29 (permalink)
     I have often ended up with a track missing from my export mix using "select all", I have used  "Select None"  CTRL/SHIFT/A  without a glitch for over 3 years now. 
    I actually I often just use the EDIT menu and SELECT - NONE- My mouse is in the neighborhood anyhow. 

    Johnny V  
    Cakelab  
    Focusrite 6i61st - Tascam us1641. 
    3 Desktops and 3 Laptops W7 and W10
     http://www.cactusmusic.ca/
     
     
    #3
    tagruvto
    Max Output Level: -86 dBFS
    • Total Posts : 221
    • Joined: 2003/12/03 17:21:29
    • Status: offline
    Re: Quirk when exporting audio... 2014/05/23 09:30:39 (permalink)
    brundlefly
    Ctrl+A and Edit > Select > All with focus on a bus will only select buses in X3, and I believe this goes back to X1. Other than that, Ctrl+A with focus on a track should always get everything, I think.


    Thanks Brundlefly!  The key piece I was missing was not consistently having the focus on a track prior to selecting All.
    :)

    i7-4770 CPU @3.40 GHZ
    16.0 GB RAM
    Widows 10   64-bit
    SONAR Platinum
    Focusrite Scarlett 18i20
    #4
    Jump to:
    © 2025 APG vNext Commercial Version 5.1