Tascam controler for x3

Author
Post
Essentials Only Full Version
CANNIMAGINE
Max Output Level: -90 dBFS
  • Total Posts : 30
  • Joined: 2011/03/06 18:09:07
  • Location: Florida
  • Status: offline
2014/06/08 10:13:44 (permalink)

Tascam controler for x3

Can a Tascam DP32SD be used as a controller for X3? If so how? Thanks
#1

1 Reply Related Threads
    tomixornot
    Max Output Level: -58.5 dBFS
    • Total Posts : 1674
    • Joined: 2011/03/05 11:31:26
    • Status: offline
    Re: Tascam controler for x3 2014/06/09 02:00:28 (permalink)
    I have the regular DP 24 (with CD and MIDI in/out), but never use it as a controller before.
     
    To answer your question, I just did a a quick test and I'm able to configure the DP faders to control Sonar's.
     
    At the DP, press MENU - MIDI
    - set REMOTE CONTROL MODE to Master
    - CONTROL CHANGE to ON.
     
    You may then proceed to setup each required Sonar's fader to learn mode and move the DP's fader.
     
    However, I'm not sure if the "SD" version can do the same, as it does not have a MIDI in/out port.

    Albert


    i7 2600K @ 3.40GHz / MB Intel DP67BG / 16GB Ram
    - ADATA 250GB SSD (Boot)
    - Samsung Spinpoint F1 1TB HDD (Samples)
    Audio interface : Motu 828 MK ii
     
    i7 6700K @ 4.00GHz / MB Asrock Z170 / 16GB Ram
    - Samsung EVO 850 120GB / 500 GB SSD

    Audio interface : Roland Quad Capture
     
    Win 10 Pro / Sonar Platinum
    #2
    Jump to:
    © 2024 APG vNext Commercial Version 5.1