BENT
Max Output Level: -83 dBFS
- Total Posts : 355
- Joined: 3/25/2013
- Location: Somewhere over the Multiverse... la la la
- Status: offline
ProChannel module power button stuck on
Hi all, while in play, power button on a ProChannel module will not turn off, stop playback and it will turn off but on returning to play module turns itself back on. This has happened to me in two projects now, both with breverb.
Any thoughts ty
I have empirical evidence this is true... (Bender told me!)  Cakewalk by BandLab, Splat and other DAW's PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, Monitors = 2 24” Samsung SA450 and 1 20” Dele Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500, Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
|
BENT
Max Output Level: -83 dBFS
- Total Posts : 355
- Joined: 3/25/2013
- Location: Somewhere over the Multiverse... la la la
- Status: offline
Re: ProChannel module power button stuck on
June 21, 14 10:03 PM
(permalink)
I should add not all buttons wont turn off just some buttons within a strip
I have empirical evidence this is true... (Bender told me!) Cakewalk by BandLab, Splat and other DAW's PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, Monitors = 2 24” Samsung SA450 and 1 20” Dele Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500, Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 8/3/2012
- Location: NYC
- Status: offline
Re: ProChannel module power button stuck on
June 21, 14 10:54 PM
(permalink)
This has happened to me before I'm sure. I've also seen the PC-2A module continue to operate (needle moving, audio compressing) when the power button is switched off. Never been able to reproduce at will and in all cases the problem was fixed by removing and replacing the module.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
BENT
Max Output Level: -83 dBFS
- Total Posts : 355
- Joined: 3/25/2013
- Location: Somewhere over the Multiverse... la la la
- Status: offline
Re: ProChannel module power button stuck on
June 22, 14 0:26 PM
(permalink)
Thanks for confirming
Yes removing and replacing the module is a (kind of) fix.
Next time this happens, to avoid loosing settings I'll try saving strip as a preset and reloading.
I have empirical evidence this is true... (Bender told me!) Cakewalk by BandLab, Splat and other DAW's PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, Monitors = 2 24” Samsung SA450 and 1 20” Dele Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500, Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 11/6/2003
- Status: offline
Re: ProChannel module power button stuck on
June 22, 14 1:01 AM
(permalink)
I have a problem where sometimes the Concrete Limiter gets stuck on maximum reduction so no signal gets through. As with Sharke, I've found the only foolproof workaround is to replace the module and re-create the settings. I try to save projects where this happens to send to Cakewalk for analysis, but if you open it from the closed state, the problem isn't there.
|
BENT
Max Output Level: -83 dBFS
- Total Posts : 355
- Joined: 3/25/2013
- Location: Somewhere over the Multiverse... la la la
- Status: offline
Re: ProChannel module power button stuck on
June 22, 14 1:21 AM
(permalink)
Thanks Craig
Would be interesting if saving the preset would make it reproducible, I'm sure the bakers would like a copy of it.
I have empirical evidence this is true... (Bender told me!) Cakewalk by BandLab, Splat and other DAW's PC = Win 10 64 Bit, i7 3770, 16Gb RAM, 256GB Samsung 2.5’ 840 PRO SATA6GB/s SSD 1, and 2 x 2Tb Internal, Monitors = 2 24” Samsung SA450 and 1 20” Dele Edirol = Octa-Capture-UA1010, Quad-Capture-UA55, PCR-500, Berringer 2 x FBC 1010 Alesis Control Pad KRK monitors
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 11/6/2003
- Status: offline
Re: ProChannel module power button stuck on
June 22, 14 1:22 AM
(permalink)
Thanks for the suggestion! I'll see if I can save a preset while it's in the messed-up state.
|