How to Get the Audio for the "Mixing with ProChannel" Tutorial

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
TerraSin
Max Output Level: -55.5 dBFS
  • Total Posts : 1975
  • Joined: 2005/08/05 00:27:13
  • Location: USA
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/01 04:38:38 (permalink)
Tried from both a Hotmail and a Gmail address. Didn't get the email on either of them. Checked junk mail as well. :(
#31
MacFurse
Max Output Level: -84 dBFS
  • Total Posts : 324
  • Joined: 2013/11/10 07:25:54
  • Location: Newcastle - Australia
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/01 17:55:04 (permalink)
I finished off a song yesterday that just wasnt gel'ing, after doing this tutorial. I started again from scratch and concentrated on the basics just using the basic prochannel tools and suddenly it all worked, minus a whole pile of plugins! Maybe ive slipped recently in trying to rush things to make things happen . Dont know. But lesson learnt. Ive wasted weeks on this one song.

Craig! Your a master. Thanks so much for your time. Once again, you are a gentlemen sir!!!!

Dave

Platinum. i7 4771 3.5ghz. ECU H87 mobo with 3 monitor support. 16gb Ripjaws 1600mhz. Focusrite 18i20. 2 x 250gb Samsung EVO SSD's OP/Programs. 2x1TB Seagate Baracuda sata3 data drives. 200gb sata2 bootable drive for online and downloading only. Seagate 2tb USB 3.0 backup drive.  2x27in monitors. Rode K2 valve mic. Sontronics STC-1 pair. Studio Projects B1 condenser. SM58B. SM57B. Presonus Eureka Preamp.
#32
Geo524
Max Output Level: -78 dBFS
  • Total Posts : 647
  • Joined: 2010/04/18 00:41:06
  • Location: UpState, NY
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/01 22:12:05 (permalink)
Hmmm? After filling out the form I never received the email with the project zip files. It wasn't in my SPAM folder either.

Win 10 x 64; CbB; SPlat; MixCraft 8 Pro; AMD FX4130, 3.8 GHz; DDR3 32 GB Ram; Focusrite Scarlett 18i20; SSD 1TB, 2 x 1TB and 1 x 640 GB HDD; Mackie HR624 Monitors, KRK G2 Rockit 5's, Dual HP S2331 23" Monitors
Music and SFX 
http://www.radiosparx.com/georgeandmarguerite
 
#33
TerraSin
Max Output Level: -55.5 dBFS
  • Total Posts : 1975
  • Joined: 2005/08/05 00:27:13
  • Location: USA
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/04 19:39:44 (permalink)
Well, I've now tried 4 times with 4 different email services and got nothing though I'm sure I'll likely get spam from Discmakers on all 4 email accounts from signing up. :\
#34
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/04 20:43:23 (permalink)
I just did it, and got the email. It arrived from noreply@cakewalk.com. Try searching on that in your email folders and see what pops up.
 
I know at least two people have been able to download the files and go through the tutorial. Can I get a roll call of:
 
Those who tried and succeeded to get the files
Those who tried and didn't get the files

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#35
scook
Forum Host
  • Total Posts : 24146
  • Joined: 2005/07/27 13:43:57
  • Location: TX
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/04 20:48:35 (permalink)
tried and succeeded to get the files
#36
millzy
Max Output Level: -73 dBFS
  • Total Posts : 890
  • Joined: 2005/01/28 20:32:51
  • Location: Melbourne, Australia
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/04 21:05:16 (permalink)
Tried and succeeded.

Millzy

i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
#37
TerraSin
Max Output Level: -55.5 dBFS
  • Total Posts : 1975
  • Joined: 2005/08/05 00:27:13
  • Location: USA
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/05 16:09:02 (permalink)
Anderton
I just did it, and got the email. It arrived from noreply@cakewalk.com. Try searching on that in your email folders and see what pops up.

Checked the spam folders on all 4. No go. :(
#38
Grem
Max Output Level: -19.5 dBFS
  • Total Posts : 5562
  • Joined: 2005/06/28 09:26:32
  • Location: Baton Rouge Area
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/06 15:38:58 (permalink)
Tried and succeeded.

Grem

Michael
 
Music PC
i7 2600K; 64gb Ram; 3 256gb SSD, System, Samples, Audio; 1TB & 2TB Project Storage; 2TB system BkUp; RME FireFace 400; Win 10 Pro 64; CWbBL 64, 
Home PC
AMD FX 6300; 8gb Ram; 256 SSD sys; 2TB audio/samples; Realtek WASAPI; Win 10 Home 64; CWbBL 64 
Surface Pro 3
Win 10  i7 8gb RAM; CWbBL 64
#39
jb101
Max Output Level: -46 dBFS
  • Total Posts : 2946
  • Joined: 2011/12/04 05:26:10
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/06 19:59:49 (permalink)
Tried and succeeded.

 Sonar Platinum
#40
shmuelyosef
Max Output Level: -87 dBFS
  • Total Posts : 178
  • Joined: 2006/05/15 21:31:46
  • Location: Palo Alto, CA
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/09 20:01:05 (permalink)
I had the same problems...just tried again with my work address and email and a fake name, in case for some reason they wouldn't send it to my cakewalk registered email...still no luck

- Sonar Platinum 64-bit; Reaper; Ableton Live 9; Samplitude
- PugetSystems Serenity Mini: WIN 10-PRO 64-bit; Intel Quad i7-4670 turbo to 3.8GHz; 16GB RAM; ASUS Gryphon Z89 - Antec P180 case. 
- Focusrite Saffire Pro 40
- DSI OB-6 (love child of a Prophet and an Oberheim)
- NORD Electro 3HP
- Roland XP-10
- Customized Fender-Rhodes Dyno Stage 73
#41
cpkoch
Max Output Level: -84 dBFS
  • Total Posts : 345
  • Joined: 2014/02/07 17:00:26
  • Location: Edgewater, Florida
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/10 23:17:23 (permalink)
I get no sound from  any of the tracks!  I know it's a DOH thing but any help is welcomed!

Sonar Platinum, HP Z210 Desktop PC,  Windows 10  64 Bit, 12  GB RAM,  Steinberg UR22 Interface Unit,  M-Audio Keyboard Studio USB MIDI Keyboard, APEX-TK -Condenser Unidirectional MIC, Audio Technica AT2020 USB MIC
 
#42
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/10 23:24:27 (permalink)
cpkoch
I get no sound from  any of the tracks!  I know it's a DOH thing but any help is welcomed!




Make sure the master out is set to the correct output in your audio interface, and that the tracks are feeding the master.

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#43
cpkoch
Max Output Level: -84 dBFS
  • Total Posts : 345
  • Joined: 2014/02/07 17:00:26
  • Location: Edgewater, Florida
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2014/08/10 23:48:50 (permalink)
Thanks  I hadn't assigned an output.  Moreover the zipped file was not properly unpacked!

Sonar Platinum, HP Z210 Desktop PC,  Windows 10  64 Bit, 12  GB RAM,  Steinberg UR22 Interface Unit,  M-Audio Keyboard Studio USB MIDI Keyboard, APEX-TK -Condenser Unidirectional MIC, Audio Technica AT2020 USB MIC
 
#44
dave007
Max Output Level: -90 dBFS
  • Total Posts : 4
  • Joined: 2015/03/25 14:42:47
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 14:48:13 (permalink)
Anderton
There's a tutorial I wrote about on the Discmakers site.


when i click on this link, the resulting page shows me a sign-up form to download a trial copy of sonar. i already have sonar.
i don't want to d/l a trial copy.
i don't want to sign up for more spam.
i really just want the tutorial.
is there another way to get it ?
 
thanks !
#45
SiTheMon
Max Output Level: -88 dBFS
  • Total Posts : 135
  • Joined: 2005/11/16 09:33:27
  • Location: Hednesford, Staffordshire, UK
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 19:13:01 (permalink)
That was a great tutorial Craig. Some top tips and shortcuts that im gonna use on a new mix tomorrow. Cheers mate
#46
Karyn
Ma-Ma
  • Total Posts : 9200
  • Joined: 2009/01/30 08:03:10
  • Location: Lincoln, England.
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 19:20:43 (permalink)
dave007
Anderton
There's a tutorial I wrote about on the Discmakers site.


when i click on this link, the resulting page shows me a sign-up form to download a trial copy of sonar. i already have sonar.
i don't want to d/l a trial copy.
i don't want to sign up for more spam.
i really just want the tutorial.
is there another way to get it ?
 
thanks !




Anderton
To get the audio, you need to fill out the form to download the trial version of SONAR X3. You then get an email link with separate download links for:
  • SONAR X3 trial
  • CA-2A trial (needed for the section on using compression)
  • The audio for the project
If all you need is the audio, then you can simply download the audio. It's about 140MB.


Mekashi Futo. 
Get 10% off all Waves plugins.
Current DAW.  i7-950, Gigabyte EX58-UD5, 12Gb RAM, 1Tb SSD, 2x2Tb HDD, nVidia GTX 260, Antec 1000W psu, Win7 64bit, Studio 192, Digimax FS, KRK RP8G2, Sonar Platinum

#47
dave007
Max Output Level: -90 dBFS
  • Total Posts : 4
  • Joined: 2015/03/25 14:42:47
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 20:00:39 (permalink)
@karyn -- yes, i know about that. i'd already got the audio before i posted. there was nothing else in the d/l except the audio and the 2 project files. what i'm expecting is some sort of tutorial... you know, something written, with tips and ideas and things.
 
@SiTheMon - where did you get the tips you wrote about ?


thanks
dave
#48
Paul P
Max Output Level: -48.5 dBFS
  • Total Posts : 2685
  • Joined: 2012/12/08 17:15:47
  • Location: Montreal
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 20:23:57 (permalink)
dave007
what i'm expecting is some sort of tutorial... you know, something written, with tips and ideas and things.

 
http://www.discmakers.com/pdf/cakewalk-guide.pdf
 
(no need to sign up)
 

Sonar Platinum [2017.10], Win7U x64 sp1, Xeon E5-1620 3.6 GHz, Asus P9X79WS, 16 GB ECC, 128gb SSD, HD7950, Mackie Blackjack
#49
dave007
Max Output Level: -90 dBFS
  • Total Posts : 4
  • Joined: 2015/03/25 14:42:47
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 20:32:37 (permalink)
fantastic !  thank you !  :)
#50
SiTheMon
Max Output Level: -88 dBFS
  • Total Posts : 135
  • Joined: 2005/11/16 09:33:27
  • Location: Hednesford, Staffordshire, UK
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 22:42:19 (permalink)
@dave007 its a great little pdf mate
#51
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/25 23:04:19 (permalink)
And I really like Mark Longworth's songwriting. Props to him for letting me do a cover of his song for the tutorial.

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#52
mauryw
Max Output Level: -82 dBFS
  • Total Posts : 445
  • Joined: 2004/12/18 12:55:55
  • Location: Santa Barbara, CA
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/26 17:18:04 (permalink)
I just tired and conat find the email to get the audio.  I got the PDF, but no audio.  Help?

Larry Williams

A process can not be understood by stopping it. One must flow with it and become one.

SONAR Platinum x64, WIN 7 Pro x64, i5-2500K, z68 mobo, 8 Gb RAM, Roland Quad-Capture, 2 SSds, 3 SATA HDDs
#53
Paul P
Max Output Level: -48.5 dBFS
  • Total Posts : 2685
  • Joined: 2012/12/08 17:15:47
  • Location: Montreal
  • Status: offline
Re: How to Get the Audio for the "Mixing with ProChannel" Tutorial 2015/03/26 18:46:56 (permalink)
 
The link is in the pdf :  http://www.cakewalk.com/Discmakers-2014
 
As are the links to trial versions of X3 and CA-2A.
 

Sonar Platinum [2017.10], Win7U x64 sp1, Xeon E5-1620 3.6 GHz, Asus P9X79WS, 16 GB ECC, 128gb SSD, HD7950, Mackie Blackjack
#54
Page: < 12 Showing page 2 of 2
Jump to:
© 2024 APG vNext Commercial Version 5.1