Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3

Author
Post
Essentials Only Full Version
fireberd
Max Output Level: -38 dBFS
  • Total Posts : 3704
  • Joined: 2008/02/25 14:14:28
  • Location: Inverness, FL
  • Status: offline
2014/08/17 10:06:15 (permalink)

Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3

I ran across a problem with the Octa-Capture drivers.   I had a PC problem that ultimately turned out to be a bad CPU.  However, in troubleshooting I replaced the motherboard (from a Gigabyte Z77 to an AS Rock Z77), before finally after everything else was substituted the CPU was replaced.   Everything appeared to be working OK but when I tried Sonar X3, I had no audio and when I pressed the space bar to play there was a long delay before it started (but no audio).  I tried several things, including an uninstall and reinstall of the Octa-Capture 1.5.2 (latest) drivers without success using ASIO.  However, if I used WDM/KS then it worked.  I checked the BIOS in the new motherboard and the setups, including the Device Driver and nothing extra or error was shown. 
 
I tried my backup recording interface unit, an MAudio Fastrack Ultra 8R and it worked OK in ASIO mode.  So, back to the Octa-Capture.  I uninstalled the 1.5.2 drivers, rebooted the PC and installed the older 1.5.1 drivers and now the ASIO mode works. 
 
??

"GCSG Productions"
Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
Ozone 5,  Studio One 4.1
ISRC Registered
Member of Nashville based R.O.P.E. Assn.
#1

6 Replies Related Threads
    wizard71
    Max Output Level: -74 dBFS
    • Total Posts : 836
    • Joined: 2012/02/12 05:45:05
    • Location: UK
    • Status: offline
    Re: Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3 2014/08/17 14:39:55 (permalink)
    I also had major issues with the octacapture driver and asio, namely in a  kontakt and X2/3 kinda way, where the project(s) kept crashing on startup. Since switching to WDM ive had no problems at all. Its definitely a Roland issue, confirmed by cake upon analysis of the dmp file, but Roland weren't interested. 
     
    Just out of interest, this happened on both an athlon based PC and my new intel.
     
    Bibs

    http://www.youtube.com/SpaceTimeAces
    https://soundcloud.com/space-time-aces
    Sonar Platinum - Win 8.1 x64 - Haswell 4770k - ASrock Z87 pro3 - 32gb ram - Fractal design R4 case - 3x HDD 1 USB 2.0 external 1x cr M4 ssd for samples - Octa-capture - Sontronics Aria - Sontronics STC-1s - BX8 monitors - ARC 2 system - Kawai CA63 piano - Kawai MP6 Stage piano - Fender custom Telecaster FMT - Yamaha LL6 - Fender P bass


    #2
    fireberd
    Max Output Level: -38 dBFS
    • Total Posts : 3704
    • Joined: 2008/02/25 14:14:28
    • Location: Inverness, FL
    • Status: offline
    Re: Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3 2014/08/17 18:15:54 (permalink)
    I've had my Octa-Capture for several years and never had a problem before, with any version of drivers and ASIO mode.  I have a dual-boot on this PC with Win 7 64 bit and Win 8 (8.1.1) 64 bit.  The Win 8 installation had no problems with the motherboard swap (automatically installed all the needed device drivers) and no problems with the Octa-Capture (still worked OK in ASIO mode).  Just the Win 7 installation, Octa-Capture 1.5.2 driver and ASIO mode.
     
    I don't think I lose anything with the 1.5.1 driver as the 1.5.2 driver was released to fix a compatibility problem with Windows 8.1 (1.5.2 is listed as Windows 7 compatible).   

    "GCSG Productions"
    Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
    ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
    Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
    Ozone 5,  Studio One 4.1
    ISRC Registered
    Member of Nashville based R.O.P.E. Assn.
    #3
    radaget
    Max Output Level: -90 dBFS
    • Total Posts : 2
    • Joined: 2015/07/02 15:02:57
    • Status: offline
    Re: Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3 2015/09/06 19:41:03 (permalink)
    Hi
     
    I'm having same problems with driver 1.52
     
    Very unstable and most of the time doesn't show up in Kontakt / UVI. 
     
    Has this been fixed or is it due to be? If not, can someone please direct me where I can download driver version 1.51 as I can't seem to find it. And can this be used with the same system version as driver 1.52?
     
     
    Thanks
     
    Tim
    #4
    fireberd
    Max Output Level: -38 dBFS
    • Total Posts : 3704
    • Joined: 2008/02/25 14:14:28
    • Location: Inverness, FL
    • Status: offline
    Re: Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3 2015/09/07 06:45:01 (permalink)
    Ultimately my original problem went away and I don't recall doing anything special.  The 1.52 driver works OK.
    I am now using a Studio-Capture as my prime unit with the Octa-Capture as backup.  Both are working equally well, with X3 and now Platinum.  I have upgraded my 8.1 installation to Win 10 and they are both working OK in Win 10. 

    "GCSG Productions"
    Franklin D-10 Pedal Steel Guitar (primary instrument). Nashville Telecaster, Bass, etc. 
    ASUS ROG Maximus VIII Hero M/B, i7 6700K CPU, 16GB Ram, SSD and conventional hard drives, Win 10 Pro and Win 10 Pro Insider Pre-Release
    Sonar Platinum/CbB. MOTU 896MK3 Hybrid, Tranzport, X-Touch, JBL LSR308 Monitors,  
    Ozone 5,  Studio One 4.1
    ISRC Registered
    Member of Nashville based R.O.P.E. Assn.
    #5
    radaget
    Max Output Level: -90 dBFS
    • Total Posts : 2
    • Joined: 2015/07/02 15:02:57
    • Status: offline
    Re: Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3 2015/09/07 11:39:55 (permalink)
    Hi
     
    Thanks for the response. Mine is still an issue. I've uninstalled / re-installed and sometimes it shows up in Kontakt and sometimes it doesn't.
     
    It def doesn't show up (ASIO) in ARIA player (Garritan) and also UVI player (True Keys).
     
    Do you know where I can get the 1.5.1 driver to try?
     
     
    Thanks
     
    Tim
    #6
    Doktor Avalanche
    Max Output Level: -32.5 dBFS
    • Total Posts : 4294
    • Joined: 2015/03/26 18:02:02
    • Status: offline
    Re: Roland Octa-Capture Driver 1.5.2 will not work in ASIO mode with X3 2015/09/07 12:13:33 (permalink)
    You've run the latest Roland system program?
    Try going to the intel driver update site, and making sure windows update is up to date.
    I hope you've not installed ASIO4ALL anywhere, if so remove.

    Ta.
    post edited by Doktor Avalanche - 2015/09/07 12:22:20

    Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
    #7
    Jump to:
    © 2024 APG vNext Commercial Version 5.1