sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Aim Assist in buses
I can't be the only one who gets frustrated writing bus automation because the very handy Aim Assist guide does not reach down into the bus pane. It's a nightmare if, say, you're automating something to a rhythmic pattern. Would be great if Aim Assist worked down there!
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
Grem
Max Output Level: -19.5 dBFS
- Total Posts : 5562
- Joined: 2005/06/28 09:26:32
- Location: Baton Rouge Area
- Status: offline
Re: Aim Assist in buses
2014/10/10 07:30:54
(permalink)
Grem Michael Music PC i7 2600K; 64gb Ram; 3 256gb SSD, System, Samples, Audio; 1TB & 2TB Project Storage; 2TB system BkUp; RME FireFace 400; Win 10 Pro 64; CWbBL 64, Home PCAMD FX 6300; 8gb Ram; 256 SSD sys; 2TB audio/samples; Realtek WASAPI; Win 10 Home 64; CWbBL 64 Surface Pro 3Win 10 i7 8gb RAM; CWbBL 64
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 2007/06/16 07:17:14
- Location: Richmond Virginia USA
- Status: offline
Re: Aim Assist in buses
2014/10/10 09:59:59
(permalink)
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re: Aim Assist in buses
2014/10/10 15:42:25
(permalink)
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: Aim Assist in buses
2014/10/11 20:09:22
(permalink)
I'm almost embarassed to say that I've never even heard of Aim Assist. Am I the only one?
Anyway I've just checked it out after looking it up in the manual and it certainly looks like something that I'll be using often now I that I am aware of it. Sharke is probably right. There is no obvious good reason why it should be absent from the Bus pane.
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1 Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc. Having fun at work lately
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: Aim Assist in buses
2014/10/12 00:13:05
(permalink)
To be honest I can't see any logical (functional) reason for it, so I'm guessing it's just a graphical thing - a consequence of the track pane and the bus pane being two independent windows. Then again I'm not a programmer so I really have no idea. If it is a graphical thing then why not just have a separate Aim Assist line for the bus pane? in other words, it just spans whichever window you're hovering in.
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re: Aim Assist in buses
2014/10/12 06:26:40
(permalink)
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Aim Assist in buses
2014/10/13 16:58:23
(permalink)
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
Re: Aim Assist in buses
2014/10/16 23:05:14
(permalink)
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Extend aim assist line into the bus pane
2015/01/17 10:37:31
(permalink)
Would be really handy for checking position of automation nodes in bus tracks.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
djjhart@aol.com
Max Output Level: -53.5 dBFS
- Total Posts : 2189
- Joined: 2008/10/24 08:45:46
- Status: offline
Re: Extend aim assist line into the bus pane
2015/01/17 11:20:26
(permalink)
John T Would be really handy for checking position of automation nodes in bus tracks.
+++1000 great Idea ...
Computer - Intel Q9550, Intel BX48bt2 MB, W8 64 bit. 8 gb Ram, SSD Hardware - Tascam Fw1884 Control surface only, Ni S49 Komplete Kontroll,Roland Quad Capture, Ni Machine,Kore, Focusrite A/D converter, Blue Mic, Roland Gaia, Akai Mpk49, Yamaha HS80 Monitors.Software - Sonar Platinum , Vengeance VPS bundle,Sugar Bytes Effectrix, Turnado, NI Komplete 10 Ultimate, Dune, Rob Papen Blade , Delay, Punch Evolved. http://soundcloud.com/johnhartson/tracks http://www.youtube.com/user/jhart1313
|
theheliosequence
Max Output Level: -88 dBFS
- Total Posts : 125
- Joined: 2015/01/04 14:34:07
- Location: Portland, OR
- Status: offline
Re: Extend aim assist line into the bus pane
2015/01/25 07:40:12
(permalink)
|
Beepster
Max Output Level: 0 dBFS
- Total Posts : 18001
- Joined: 2012/05/11 19:11:24
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 10:48:31
(permalink)
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 12:17:01
(permalink)
Agreed! This would be a very useful feature... Of course with an over ride for other decisions/needs...
|
Beepster
Max Output Level: 0 dBFS
- Total Posts : 18001
- Joined: 2012/05/11 19:11:24
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 12:26:06
(permalink)
Keni Agreed! This would be a very useful feature... Of course with an over ride for other decisions/needs...
Would the regular suspension Aim Assist function be sufficient or do you need to have the active/inactive states separate in the Clips Pane and Bus Pane? I believe there is a keybinding to turn it on and off so that's pretty easy (but if you quizzed me on the binding I'd fail... lol). Just curious as to scenarios where you'd need it active in the Clips Pane but inactive in the Bus Pane (or vice versa)... yanno, because I'm a curious little monkey. Cheers.
|
Keni
Max Output Level: -17.5 dBFS
- Total Posts : 5769
- Joined: 2003/11/04 10:42:15
- Location: Willits, CA USA
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 12:42:59
(permalink)
Beepster
Keni Agreed! This would be a very useful feature... Of course with an over ride for other decisions/needs...
Would the regular suspension Aim Assist function be sufficient or do you need to have the active/inactive states separate in the Clips Pane and Bus Pane? I believe there is a keybinding to turn it on and off so that's pretty easy (but if you quizzed me on the binding I'd fail... lol). Just curious as to scenarios where you'd need it active in the Clips Pane but inactive in the Bus Pane (or vice versa)... yanno, because I'm a curious little monkey. Cheers.
Nothing that I can think of at the moment, but I am a firm believer in user control and as we've all worked this way for so long I'm second guessing that somewhere down the line I might run into such a need... So better to have an ignored control than not have it...?
|
Beepster
Max Output Level: 0 dBFS
- Total Posts : 18001
- Joined: 2012/05/11 19:11:24
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 12:55:47
(permalink)
Agreed. In this scenario I'd probably just make use of the binding to turn it on and off as needed via the binding maybe I guess if someone needed to visually keep an eye on a waveform (in the bus pane or vice versa) while making adjustments in the clips pane that required aim assist and the line was obstructing their view that could be a little irksome. That's too fancy dancy for me at the moment but I'm always into more control and options. Always. Cheers.
|
PilotGav
Max Output Level: -82 dBFS
- Total Posts : 436
- Joined: 2004/12/10 22:00:46
- Location: Toronto
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 15:46:43
(permalink)
Please make this happen, Mr. Cake.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/04 22:42:17
(permalink)
While waiting for Aim Assist to be modified, here is an autohotkey script to add a vertical line at the current mouse position, when running SONAR Platinum, bound with Windows+a #a:: SetTitleMatchMode RegEx ;use regular expression pattern matching for titles If visible { Gui, aimAssist:Destroy visible := 0 } Else If WinActive("ahk_exe i)SONARPLT.exe") { CoordMode, Mouse, Screen SysGet, mon, Monitor Gui, aimAssist:New, +AlwaysOnTop +LastFound +Owner -Caption Gui, aimAssist:Font, S1 Gui, aimAssist:Add, Text, h%monBottom% 0x11 Gui, aimAssist:Font, S MouseGetPos, x Gui, aimAssist:Show, X%x% WinActivate, ahk_exe i)SONARPLT.exe visible := 1 } Return For those who do not want to mess with autohotkey, I compiled a version. The only difference is Windows+a will always draw the vertical line in the compiled version, the script will only draw the line when SONAR is running. https://drive.google.com/...FV99Vq6eTNlVFNwOXJndXM
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/08 13:08:55
(permalink)
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
stickman393
Max Output Level: -60 dBFS
- Total Posts : 1528
- Joined: 2003/11/07 18:35:26
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/08 14:32:23
(permalink)
Ironically (?) this is one reason I'm anxiously awaiting the "Aux Tracks"/"Patch Points"/"Busses in Track Pane". I'd be able to edit bus automation right underneath the tracks that feed it, and the Aim Assist line would be visible.
|
stevec
Max Output Level: 0 dBFS
- Total Posts : 11546
- Joined: 2003/11/04 15:05:54
- Location: Parkesburg, PA
- Status: offline
Re: Extend aim assist line into the bus pane
2015/09/08 17:00:04
(permalink)
stickman393 Ironically (?) this is one reason I'm anxiously awaiting the "Aux Tracks"/"Patch Points"/"Busses in Track Pane". I'd be able to edit bus automation right underneath the tracks that feed it, and the Aim Assist line would be visible.
Good point!
SteveC https://soundcloud.com/steve-cocchi http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163 SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors; Focusrite 18i6 (ASIO); Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
|
Re: Extend aim assist line into the bus pane
2015/09/08 22:49:16
(permalink)
And: Display an AIM TIME box next to the NOW TIME.
|
LJB
Max Output Level: -60 dBFS
- Total Posts : 1502
- Joined: 2009/07/29 10:31:31
- Location: South Africa
- Status: offline
Aim Assist across tracks AND busses?
2015/10/05 03:48:48
(permalink)
Surely easy to do - Bakers? Can we please have the Aim Assist across both Tracks and Busses? Thanks! Ludwig
Ludwig Bouwer, One Big Room Studios. -------------------- Cakewalk with all the trimmings / Win 10Pro 64 / Intel i7-7700 / Asus Prime Z270k / 16GB DDR4 / RME HDSP9652 / RME UFX / Black Lion Audio ADA8000 / ART MPA & ART Pro Channel / Focusrite Voicemaster Pro / Aphex 107 Check out my work at www.onebigroom.co.za
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: Aim Assist across tracks AND busses?
2015/10/05 16:59:49
(permalink)
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
M@
Max Output Level: -86 dBFS
- Total Posts : 221
- Joined: 2015/01/07 17:58:56
- Location: Innsbruck, Austria
- Status: offline
Re: Aim Assist across tracks AND busses?
2015/10/11 18:46:26
(permalink)
Lack of this function has definitely provided a non-hassle-free workflow more than just once or twice...if you know what I'm saying. So yes!! Voted for it to be on Sonars (next) update.
Tracking: Sonar Platinum (X3 Producer, X2 studio, X1 expanded, 8.3) (64bit)System: Win10 Pro (64bit), Asus P8Z77 V Le Plus, I7-3770k, 16GB Ram, SSD System drive, Raid1 Recording & Backup drive, VS-700 Set, TC Konnekt 48Instruments: Roland Juno Stage, Kawai CA5, Washburn X50Pro, Blackstar-One100, Merida,...
|