peavey_xxx_treme
Max Output Level: -90 dBFS
- Total Posts : 24
- Joined: 2013/04/10 21:44:43
- Status: offline
VS700SET V-Xpanded with a studio capture..
I recently purchased a Roland studio capture, and was using it flawlessly with an old peavey studio mix controller.. I then acquired a VS700C, and was running the Studio-Capture for I/O and the VS700C driver with the unit in standalone mode.. This too worked flawlessly.. Not even a week later I came across a VS700R at a steal of a price with an Included ARX expansion.. My plan was to use the VS700SET together and V-XPAND the 700R with the additional I/O of the studio capture, Giving me 20 XLR Ins.. I updated the drivers as described in the vxpand procedure, and updated the firmware on the console, & 700r... but not the Studio capture.. instructions said not to.. I can not get these two paired up... has anyone used a studio capture with a 700R? Please advise-
Dell Inspiron 600, Intel Core i5-3330 @ 3GHz, 8GB DDR3 RAM, W8 64bit, 1TB HDD, Sonar X3a Producer, VS-700C/R, Roland Studio Capture, Peavey StudioMix, Avid ElevenRack, NI Maschine, Roland CM-220, Dynaudio BM5A
|
garybrun
Max Output Level: -82 dBFS
- Total Posts : 436
- Joined: 2005/11/03 11:15:44
- Location: Norway
- Status: offline
Re: VS700SET V-Xpanded with a studio capture..
2015/02/16 15:25:52
(permalink)
I also have the same problem as I have just purchased a Studio Capture very cheaply.
Sonar Platinum 64bit, Win 10 64 bit, English, Intel Core i7 4960X @ 3.67GHz, ASRock Motherboard, 48GB DDR3 1600MHz, Nvidea NVS 510, Intel 750 1.2 SSD, 488GB SSD, 300GB SSD, 22TB in SATA Hardware: VS-700 set ASIO, Presonus RM32ai, Studio Live III 32, Studiolive 32R, RME Fireface 800, Matrox MX02 Rack, Roland Integra 7, Roland A-88, Edirol R-4 Pro, Focusrite Liquid Channel x 2, Jomeek Studio Channel VC1Qcs, Ultra Dyne 9024, TD30KV, Komplete 9 Ultimate, Monitors: Focal TRIO6 BE, JBL Studio Monitor 4412, SE Monroe Egg 150, Avantone x 2.
|
garybrun
Max Output Level: -82 dBFS
- Total Posts : 436
- Joined: 2005/11/03 11:15:44
- Location: Norway
- Status: offline
V-Studio 700 Set and Roland Studio Capture
2015/02/16 16:14:46
(permalink)
Is there anyone out there who has managed to get these to sync together.
All my drivers are up to date and my computer specs are in my signature below.
Sonar Platinum 64bit, Win 10 64 bit, English, Intel Core i7 4960X @ 3.67GHz, ASRock Motherboard, 48GB DDR3 1600MHz, Nvidea NVS 510, Intel 750 1.2 SSD, 488GB SSD, 300GB SSD, 22TB in SATA Hardware: VS-700 set ASIO, Presonus RM32ai, Studio Live III 32, Studiolive 32R, RME Fireface 800, Matrox MX02 Rack, Roland Integra 7, Roland A-88, Edirol R-4 Pro, Focusrite Liquid Channel x 2, Jomeek Studio Channel VC1Qcs, Ultra Dyne 9024, TD30KV, Komplete 9 Ultimate, Monitors: Focal TRIO6 BE, JBL Studio Monitor 4412, SE Monroe Egg 150, Avantone x 2.
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: V-Studio 700 Set and Roland Studio Capture
2015/02/17 06:27:20
(permalink)
I'm not sure what you are trying to do but from the info I got when the studio capture came out ( http://forum.cakewalk.com/FindPost/2762636) it seems it was not designed to work with the VS-700 ... hence I never considered using it ... Edit: the post I was referring to is about 2 yrs old but meanwhile there have not been any driver updates for VS-700 (other than porting to win 8) which would have mentioned address this (VS-700 & Octa-Capture still use what Roland calls VS EXPAND, while the Studio Capture uses VS STREAMING technology)...
post edited by FreeFlyBertl - 2015/02/17 06:35:02
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: VS700SET V-Xpanded with a studio capture..
2015/02/17 06:33:10
(permalink)
As I just posted in the other thread ... ... from the info I got when the studio capture came out ( http://forum.cakewalk.com/FindPost/2762636) it seems it was not designed to work with the VS-700 ... hence I never considered using it ... Edit: the post I was referring to is about 2 yrs old but meanwhile there have not been any driver updates for VS-700 (other than porting to win 8) which would have mentioned address this (VS-700 & Octa-Capture still use what Roland calls VS EXPAND, while the Studio Capture uses VS STREAMING technology)
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
garybrun
Max Output Level: -82 dBFS
- Total Posts : 436
- Joined: 2005/11/03 11:15:44
- Location: Norway
- Status: offline
Re: VS700SET V-Xpanded with a studio capture..
2015/02/17 06:45:33
(permalink)
Oops... looks like a bought something I cant use :-)
Sonar Platinum 64bit, Win 10 64 bit, English, Intel Core i7 4960X @ 3.67GHz, ASRock Motherboard, 48GB DDR3 1600MHz, Nvidea NVS 510, Intel 750 1.2 SSD, 488GB SSD, 300GB SSD, 22TB in SATA Hardware: VS-700 set ASIO, Presonus RM32ai, Studio Live III 32, Studiolive 32R, RME Fireface 800, Matrox MX02 Rack, Roland Integra 7, Roland A-88, Edirol R-4 Pro, Focusrite Liquid Channel x 2, Jomeek Studio Channel VC1Qcs, Ultra Dyne 9024, TD30KV, Komplete 9 Ultimate, Monitors: Focal TRIO6 BE, JBL Studio Monitor 4412, SE Monroe Egg 150, Avantone x 2.
|
Rob[at]Sound-Rehab
Max Output Level: -47 dBFS
- Total Posts : 2819
- Joined: 2011/02/03 04:31:35
- Location: Sound-Rehab, Austria
- Status: offline
Re: VS700SET V-Xpanded with a studio capture..
2015/02/17 06:49:42
(permalink)
I'd still ask Roland if it's still the same status ...
Anyway, you could buy a 2nd Studio Capture and sync those, use only the VS-700C (and switch off the noisy VS-700R) ...
GOOD TUNES LAST FOREVER +++ Visit the Rehab +++ DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600 Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture) Control-Surface: VS-700C VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really)
|
peavey_xxx_treme
Max Output Level: -90 dBFS
- Total Posts : 24
- Joined: 2013/04/10 21:44:43
- Status: offline
Re: VS700SET V-Xpanded with a studio capture..
2015/02/19 16:53:16
(permalink)
I haven't checked this in awhile... i never did get the vxpand feature to allow me to use the io of both units.. however, it will let me use the midi ports of either unit.. weird!! Idk. I tried working with Roland they forward you to cakewalk, who forwards you back to Roland.. endless cycle.. they never even responded to 3 tickets I submitted.. guess we are out of luck
Dell Inspiron 600, Intel Core i5-3330 @ 3GHz, 8GB DDR3 RAM, W8 64bit, 1TB HDD, Sonar X3a Producer, VS-700C/R, Roland Studio Capture, Peavey StudioMix, Avid ElevenRack, NI Maschine, Roland CM-220, Dynaudio BM5A
|
garybrun
Max Output Level: -82 dBFS
- Total Posts : 436
- Joined: 2005/11/03 11:15:44
- Location: Norway
- Status: offline
Re: VS700SET V-Xpanded with a studio capture..
2015/02/21 06:53:00
(permalink)
I have also managed to get it working with the xtra midi on studio EXPANDED.
Sonar Platinum 64bit, Win 10 64 bit, English, Intel Core i7 4960X @ 3.67GHz, ASRock Motherboard, 48GB DDR3 1600MHz, Nvidea NVS 510, Intel 750 1.2 SSD, 488GB SSD, 300GB SSD, 22TB in SATA Hardware: VS-700 set ASIO, Presonus RM32ai, Studio Live III 32, Studiolive 32R, RME Fireface 800, Matrox MX02 Rack, Roland Integra 7, Roland A-88, Edirol R-4 Pro, Focusrite Liquid Channel x 2, Jomeek Studio Channel VC1Qcs, Ultra Dyne 9024, TD30KV, Komplete 9 Ultimate, Monitors: Focal TRIO6 BE, JBL Studio Monitor 4412, SE Monroe Egg 150, Avantone x 2.
|