ElRoc0 Tha Gr81
Max Output Level: -84 dBFS
- Total Posts : 309
- Joined: 2004/05/09 21:13:40
- Location: South Chi
- Status: offline
[Solved] Converting a track to split mono
I imported an MP3 into Sonar X3e and it's stereo. I want to split the left/right channels to control the volume of each individually. Do I have to re-import or can I split it?
post edited by Five0SixBand - 2014/12/11 23:16:58
http://twitter.com/RocHardEntGrp http://www.SoundCloud.com/RocHardEntGrp i7 3.5 quadcore, TridentX 32gb, Sonar x2 & X3e, Project 5, RME Fireface 800, FW-1884,, Tranzport, Presonus, Aphex, Alesis, 2 Panasonic Ramsa DA-7's, Waves Diamond, Komplete 9, MV88, MPC2K, Fantom X7, Liquidmix, Tama, Ibanez, Line 6, Hartke, Boss, RME, Behringer ADA8K, washburn, TD8, AKG, Shure, Neuman, Sennheiser
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: What's it called when you.....
2014/12/11 22:22:50
(permalink)
Five0SixBand
...can I split it?
Select the clip From the Tracks menu, select Bounce to Track(s)Choose Tracks as the Source Category Choose Split Mono as the format
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
ElRoc0 Tha Gr81
Max Output Level: -84 dBFS
- Total Posts : 309
- Joined: 2004/05/09 21:13:40
- Location: South Chi
- Status: offline
Re: What's it called when you.....
2014/12/11 22:40:23
(permalink)
http://twitter.com/RocHardEntGrp http://www.SoundCloud.com/RocHardEntGrp i7 3.5 quadcore, TridentX 32gb, Sonar x2 & X3e, Project 5, RME Fireface 800, FW-1884,, Tranzport, Presonus, Aphex, Alesis, 2 Panasonic Ramsa DA-7's, Waves Diamond, Komplete 9, MV88, MPC2K, Fantom X7, Liquidmix, Tama, Ibanez, Line 6, Hartke, Boss, RME, Behringer ADA8K, washburn, TD8, AKG, Shure, Neuman, Sennheiser
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: What's it called when you.....
2014/12/11 22:48:49
(permalink)
marked as [Solved], also made subject line fit topic.
|
ElRoc0 Tha Gr81
Max Output Level: -84 dBFS
- Total Posts : 309
- Joined: 2004/05/09 21:13:40
- Location: South Chi
- Status: offline
Re: What's it called when you.....
2014/12/11 23:21:09
(permalink)
Splitting is something different. It's really converting a track from stereo to split mono
http://twitter.com/RocHardEntGrp http://www.SoundCloud.com/RocHardEntGrp i7 3.5 quadcore, TridentX 32gb, Sonar x2 & X3e, Project 5, RME Fireface 800, FW-1884,, Tranzport, Presonus, Aphex, Alesis, 2 Panasonic Ramsa DA-7's, Waves Diamond, Komplete 9, MV88, MPC2K, Fantom X7, Liquidmix, Tama, Ibanez, Line 6, Hartke, Boss, RME, Behringer ADA8K, washburn, TD8, AKG, Shure, Neuman, Sennheiser
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 09:44:01
(permalink)
Five0SixBand
I imported an MP3 into Sonar X3e and it's stereo. I want to split the left/right channels to control the volume of each individually. Do I have to re-import or can I split it?
If all you want to do is adjust the volume, use the Channel Tools plug-in and you will have independent control over each channel's level, pan, delay, and phase. Or if you want to make a permanent change, you can use the Process > Apply Effect > Gain option.
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 10:11:01
(permalink)
Anderton
Five0SixBand
I imported an MP3 into Sonar X3e and it's stereo. I want to split the left/right channels to control the volume of each individually. Do I have to re-import or can I split it?
If all you want to do is adjust the volume, use the Channel Tools plug-in and you will have independent control over each channel's level, pan, delay, and phase. Or if you want to make a permanent change, you can use the Process > Apply Effect > Gain option.
Craig, do we have the option to split stereo in a way that each side goes to a separate track?
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 12:31:20
(permalink)
Atsuko
Craig,
do we have the option to split stereo in a way that each side goes to a separate track?
Yes, bounce to track and choose "Split Mono" for Channel Format. The bounce will create two tracks, one with the left and one with the right channel.
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 12:47:34
(permalink)
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 12:57:40
(permalink)
Atsuko
So simple... Thanks!!
I like simple 
|
Atsuko
Max Output Level: -83 dBFS
- Total Posts : 365
- Joined: 2012/09/21 18:17:28
- Location: Rio de Janeiro, Brazil
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 13:22:12
(permalink)
Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 2007/05/01 14:22:54
- Location: Victoria, Australia
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 16:24:35
(permalink)
Anderton
Atsuko
...do we have the option to split stereo in a way that each side goes to a separate track?
Yes, bounce to track and choose "Split Mono" for Channel Format. The bounce will create two tracks, one with the left and one with the right channel.
Déjà vu
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: [Solved] Converting a track to split mono
2014/12/12 17:29:38
(permalink)
Except yours had better text formatting My main reason for coming into the thread was to mention the alternative of using Channel Tools. By that time, I'd forgotten what was at the beginning...
|