grince
Max Output Level: -90 dBFS
- Total Posts : 14
- Joined: 2010/01/23 14:45:25
- Status: offline
help getting sound from fantom vs
please help
My fantom vs wont give any sound. sonar 8.5.2 32bit on win7 64 bit.
|
Beagle
Max Output Level: 0 dBFS
- Total Posts : 50621
- Joined: 2006/03/29 11:03:12
- Location: Fort Worth, TX
- Status: offline
Re:help getting sound from fantom vs
2011/03/14 16:21:24
(permalink)
well you've not given us very much info to help with.
how are you triggering it? from a sonar project? do you have a MIDI track? do you have the MIDI track set up to send the MIDI data to the Fantom?
or are you trying to trigger it with a midi controller/keyboard? if so, how is the controller connected to the VS?
how do you have the fantom connected to the computer? do you have the VS700 or just the fantom vs? if you have the vs700 do you have the fantom vs connected to the vs700 with a midi cable? do you have the audio outputs connected from the fantom to the vs?
give us some more details, please.
|
Beagle
Max Output Level: 0 dBFS
- Total Posts : 50621
- Joined: 2006/03/29 11:03:12
- Location: Fort Worth, TX
- Status: offline
Re:help getting sound from fantom vs
2011/03/14 16:28:57
(permalink)
sorry - looks like the fantom vs is integrated into the I/O, but most of my questions above still apply, just not the ones about how you have it connected to the VS700.
|
grince
Max Output Level: -90 dBFS
- Total Posts : 14
- Joined: 2010/01/23 14:45:25
- Status: offline
Re:help getting sound from fantom vs
2011/03/14 16:50:11
(permalink)
I have the vs700. i went to insert soft synth and the editor comes up, i have a midi track with the ouput on fantomvs, input - none. I have an audio track with the input on fantom primary out put and the adio tracks output to master. when i play midi i dont get any audio. in options- progect- sync output ports i have fantom vs selected.
|
Beagle
Max Output Level: 0 dBFS
- Total Posts : 50621
- Joined: 2006/03/29 11:03:12
- Location: Fort Worth, TX
- Status: offline
Re:help getting sound from fantom vs
2011/03/14 22:10:31
(permalink)
what is the output for your Master bus? has the I/O been profiled in sonar?
is this the first time you're using the VS700? can you hear anything using demo projects or imported mp3s?
|
Jjvande
Max Output Level: -90 dBFS
- Total Posts : 9
- Joined: 2012/02/28 01:48:52
- Status: offline
Re:help getting sound from fantom vs
2012/03/11 13:18:50
(permalink)
I have the exact same issue. installed latest drivers, editor, firmware, etc. I insert fantom VS as soft synth...load patches....no errors, but NO SOUND. Other softsynths in same project are working fine. very odd?
|
Cactus Music
Max Output Level: 0 dBFS
- Total Posts : 8424
- Joined: 2004/02/09 21:34:04
- Status: offline
Re:help getting sound from fantom vs
2012/03/12 00:04:40
(permalink)
OK lets get this right, The Fantom GS is a hardware synth built in the the VS700. So why are you saying it's a VST plug in? Is that how it shows within Sonar? If it's a hardware synth then it will need midi data via the USB or MIDI cable from the computer, right?
|
daveny5
Max Output Level: 0 dBFS
- Total Posts : 16934
- Joined: 2003/11/06 09:54:36
- Location: North Carolina
- Status: offline
Re:help getting sound from fantom vs
2012/03/12 08:53:19
(permalink)
Its a hardware synth integrated into the VS-700 which is connected via USB. Therefore, it should be available
Did you install the VS-700 driver from the CD or download the latest version. Make sure your USB cable is unplugged when doing this. Follow the instructions in the VS-700 Getting Started Guide carefully.
To use the Fantom VS, go to Insert-Softsynth and it should be available. If not, then you may have installed to a non-standard folder. If so, you'll have to tell Sonar where you put it and scan your VSTs again. Its always best to install Sonar to the default locations otherwise you could have problems.
If you're able to insert it to the synth rack, then go to a MIDI track and set the Fantom VS as the Output.
That should do it. Its all in the VS-700 manuals.
Dave Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic. Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
|
rrsis
Max Output Level: -90 dBFS
- Total Posts : 6
- Joined: 2012/03/14 00:19:15
- Status: offline
Re:help getting sound from fantom vs
2012/03/14 06:15:52
(permalink)
when i play midi i dont get any audio. in options- progect- sync output ports i have fantom vs selected. 
|
daveny5
Max Output Level: 0 dBFS
- Total Posts : 16934
- Joined: 2003/11/06 09:54:36
- Location: North Carolina
- Status: offline
Re:help getting sound from fantom vs
2012/03/14 10:37:05
(permalink)
Ok. Try the same track using the TTS-1 as the softsynth instead of the Fantom. Do you hear any sound? If not, then its a problem with your setup, not the Fantom.
What do you have selected in Options-Audio-Drivers?
Dave Computer: Intel i7, ASROCK H170M, 16GB/5TB+, Windows 10 Pro 64-bit, Sonar Platinum, TASCAM US-16x08, Cakewalk UM-3G MIDI I/F Instruments: SL-880 Keyboard controller, Korg 05R/W, Korg N1R, KORG Wavestation EX Axes: Fender Stratocaster, Line6 Variax 300, Ovation Acoustic, Takamine Nylon Acoustic, Behringer GX212 amp, Shure SM-58 mic, Rode NT1 condenser mic. Outboard: Mackie 1402-VLZ mixer, TC Helicon VoiceLive 2, Digitech Vocalist WS EX, PODXTLive, various stompboxes and stuff. Controllers: Korg nanoKONTROL, Wacom Bamboo Touchpad
|
rmcp2004
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2014/12/19 01:12:08
- Status: offline
Re:help getting sound from fantom vs
2015/01/04 18:41:12
(permalink)
I loaded the 64 bit driver for fantom but in the vst plugins it say 32 bit . also I have no sound and it is the intergrated vs fantom in the 700 r.
|
konradh
Max Output Level: -42 dBFS
- Total Posts : 3325
- Joined: 2006/01/16 16:07:06
- Status: offline
Re:help getting sound from fantom vs
2015/01/05 11:04:30
(permalink)
I have a VS-700 and finally gave up on the Fantom, which, by the way, was a selling point for the package.
It took all sorts of intervention from Sweetwater, and it worked for a while, but now it has stopped working.
Disappointing.
Konrad Current album and more: http://www.themightykonrad.com/ Sonar X1d Producer. V-Studio 700. PC: Intel i7 CPU 3.07GHz, 12 GB RAM. Win 7 64-bit. RealGuitar, RealStrat, RealLPC, Ivory II, Vienna Symphonic, Hollywood Strings, Electr6ity, Acoustic Legends, FabFour, Scarbee Rick/J-Bass/P-Bass, Kontakt 5. NI Session Guitar. Boldersounds, Noisefirm. EZ Drummer 2. EZ Mix. Melodyne Assist. Guitar Rig 4. Tyros 2, JV-1080, Kurzweil PC2R, TC Helicon VoiceWorks+. Rode NT2a, EV RE20. Presonus Eureka. Rokit 6s.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re:help getting sound from fantom vs
2015/01/05 11:17:01
(permalink)
rmcp2004
I loaded the 64 bit driver for fantom but in the vst plugins it say 32 bit . also I have no sound and it is the intergrated vs fantom in the 700 r.
If I were you I'd start a new thread, detailing all the information you can provide. Simply saying "I have no sound" is not going to help us (& therefore you) one bit, nor is tagging onto the end of a 3 year old thread.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
jeffb63
Max Output Level: -80 dBFS
- Total Posts : 516
- Joined: 2007/10/24 17:15:05
- Location: Devon, England.
- Status: offline
Re:help getting sound from fantom vs
2015/01/11 08:41:40
(permalink)
Do you have the sliders for the Fantom VS up in the I/O editor?
One thing that's annoyed me since I've had the VS700R is that all the mix levels you set up in the I/O editor don't seem to persist in The VS700R after power cycling so you have to load your mix at the start of every session!
Studio: X3 Producer on i7 4770K Asus Z87-K 32Gb G-Skill Trident X. W8.1 x64. 2408 Mk3, ADI8-DD. BCF2000. Stage: Cantabile Performer 2 on Lenovo W530 i7 3720QM 16Gb DDR3. Samsung 840 Evo, Samsung 840 Pro. W7 x64.
|