Cakewalk by BandLab
Prev Thread
Next Thread

AnsweredSonar Platinum - Crash when setting master to none

Author
Post
Essentials Only Full Version
DeanG
Max Output Level: -90 dBFS
  • Total Posts : 7
  • Joined: 8/26/2009
  • Status: offline
January 26, 15 4:07 AM (permalink)

Sonar Platinum - Crash when setting master to none

As per the thread title I crash Sonar when I set the master to none. Can't even kill the process, have to reboot.
 
Can someone else try this and see if they get the same result?
 
Thanks,
Dean
#1
See best answer

6 Replies Related Threads
    Shambler
    Max Output Level: -75 dBFS
    • Total Posts : 783
    • Joined: 7/6/2010
    • Status: offline
    Re: Sonar Platinum - Crash when setting master to none January 26, 15 7:24 AM (permalink)
    I've tried this but I do not get a crash.

    SONAR Platypus on Win10 64bit.
    Studio One Pro / Cubase Pro 9.5...just in case.
    8GB i7-2600 3.4GHz Gigabyte  Z68XP-UD3P
    Geforce GTX970
    Focusrite Scarlett 18i20 2nd Gen
    Prophet 12/Rev 2/Virus Snow
    Zebra2/DIVA/NI Komplete 10
    #2
    mudgel
    Max Output Level: 0 dBFS
    • Total Posts : 12010
    • Joined: 8/13/2004
    • Location: Linton Victoria (Near Ballarat)
    • Status: offline
    Re: Sonar Platinum - Crash when setting master to none January 26, 15 8:04 AM (permalink)
    No crash here either.

    Mike V. (MUDGEL)

    STUDIO: Win 10 Pro x64, SPlat & CbB x64,
    PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
    Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
    Monitors: Adam A7X, JBL 10” Sub.
    Audio I/O & DSP Server: DIGIGRID IOS & IOX.
    Screen: Raven MTi + 43" HD 4K TV Monitor.
    Keyboard Controller: Native Instruments Komplete Kontrol S88.
    #3
    pwalpwal
    Max Output Level: -43 dBFS
    • Total Posts : 3249
    • Joined: 1/17/2015
    • Status: offline
    Re: Sonar Platinum - Crash when setting master to none January 26, 15 8:06 AM (permalink)
    what soundcard & driver are you using?
    #4
    microapp
    Max Output Level: -77 dBFS
    • Total Posts : 653
    • Joined: 10/31/2013
    • Location: Wondervu, CO
    • Status: offline
    Re: Sonar Platinum - Crash when setting master to none January 26, 15 12:57 AM (permalink)
    No problem here either.

    Sonar Platinum, Cubase Pro 8.5, Reaper 5, Studio One 2
    Melodyne Studio 4, Finale 2012
    I7-5820K 4.5GHz, 32 GB DDR4-2800,3 monitors,Win 10 Pro
    Toshiba P75-A7100,l7-4900 2.4 Ghz/8MB Win 8.1 Pro
    Tascam FW-1884, Emu 0404USB, CMC-AI,Axiom 61
    Yamaha HS-50's, Sony SA-W2500, Sennheiser RS170's, ATH-M50
    Ibanez Jem7VWH, RG-1570
    Jackson DK2-S(Sustainiac),Les Paul Custom
    Digitech Valve-FX, GFX-1,TSR-24,RP-90
    #5
    DeanG
    Max Output Level: -90 dBFS
    • Total Posts : 7
    • Joined: 8/26/2009
    • Status: offline
    Re: Sonar Platinum - Crash when setting master to none January 26, 15 3:02 PM (permalink)
    Thanks all for trying that, at least I know the problem is on my side.
    That system is running a VS 100, although I do have a Babyface which I can try as well. I only got a few minutes yesterday to test it out, so all is pretty much default at the moment.
    Will report back with further results after I get a bit more time to test.
    Thanks,
    Dean
    #6
    DeanG
    Max Output Level: -90 dBFS
    • Total Posts : 7
    • Joined: 8/26/2009
    • Status: offline
    Re: Sonar Platinum - Crash when setting master to none January 26, 15 5:46 PM (permalink) ☼ Best Answerby CakeAlexS January 26, 15 6:03 PM
    Hi all,
    Seems to have cleared itself up. I ran the latest update, and deleted and recreated the VS100 control service configuration.
    Thanks,
    Dean
     
    #7
    Home » [Cakewalk Products] » SONAR » Sonar Platinum - Crash when setting master to none
    Jump to:
    © 2025 APG vNext Commercial Version 5.1