(Solved) I think this was asked but I can't find it sorry to repeat

Author
Post
Essentials Only Full Version
Mosvalve
Max Output Level: -67 dBFS
  • Total Posts : 1194
  • Joined: 2009/11/20 20:49:33
  • Location: New Jersey
  • Status: offline
2015/02/09 20:15:19 (permalink)

(Solved) I think this was asked but I can't find it sorry to repeat

I installed Platinum today and want to know since I already have AD2 do I have to install it again to get the 3 adpaks or just register the new AD2 at XLN to get the adpaks?
is it going to be a problem having two AD2 registered? Where can I find this info?
 
Thanks
post edited by Mosvalve - 2015/02/09 21:14:16

BobV 
 
 
 
ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
#1

2 Replies Related Threads
    DoctorCalabria
    Max Output Level: -90 dBFS
    • Total Posts : 36
    • Joined: 2010/12/21 01:24:57
    • Status: offline
    Re: I think this was asked but I can't find it sorry to repeat 2015/02/09 20:52:26 (permalink)
    Just go to the XLN Online Installer from the Start menu > All Programs > XLN and run it.  After it completes the scan and does some update checks, click on Register Products. You will be presented with the available updated along with XLN products you already have.  I left the check boxs that asks where you purchased it blank, since someone here mentioned it can cause a problem if you check the wrong one; doing so had no effect on getting the ADpacks.  Select the ones you want and hit the apply button. Done deal.

    Sonar Version:  Sonar Platinum  
    Audio Interface: RME RayDAT w/ Behringer X32 and X-ADAT interface
    Computer: i7-4790k, 32GB RAM, Windows 7 Pro x64, Samsung SSD 500G, HGST 4G x 2, QNAP NAS
    SW: iZotope Ozone 6, RX 4, NI Komplete 10 Ultimate, Plogue Bidule, Omnisphere, Trilian
    MIDI Controllers: A-Pro, NI Komplete Kontrol 61, Fatar 88, X32


    #2
    Mosvalve
    Max Output Level: -67 dBFS
    • Total Posts : 1194
    • Joined: 2009/11/20 20:49:33
    • Location: New Jersey
    • Status: offline
    Re: I think this was asked but I can't find it sorry to repeat 2015/02/09 21:12:38 (permalink)
    DoctorCalabria
    Just go to the XLN Online Installer from the Start menu > All Programs > XLN and run it.  After it completes the scan and does some update checks, click on Register Products. You will be presented with the available updated along with XLN products you already have.  I left the check boxs that asks where you purchased it blank, since someone here mentioned it can cause a problem if you check the wrong one; doing so had no effect on getting the ADpacks.  Select the ones you want and hit the apply button. Done deal.


    Thanks for the reply. What I decided to try is log in to the XLN installer and register AD2. I was able to select and install the ADPaks I wanted. There was no need to install AD2 since Platinum found the one already installed.
    Thanks again.

    BobV 
     
     
     
    ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU,  Windows 10 Pro 64bit,  , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub,  and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
    #3
    Jump to:
    © 2025 APG vNext Commercial Version 5.1