meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
[Solved] Platinum: Crackling and poping during playback and crashing regularly
The crackling and popping has been going on since the upgrade. It crashes almost every time I change or close a project ( I think this has to do with Amplitude plug ins). Apparently I have sent enough of the crash dumps that I'm not getting anymore problem numbers.
Got plenty of hd space
Got plenty of memory
Not sure what to do about this....
rafone
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
Beagle
Max Output Level: 0 dBFS
- Total Posts : 50621
- Joined: 2006/03/29 11:03:12
- Location: Fort Worth, TX
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 09:49:39
(permalink)
which driver mode are you set to? what is your latency set to? you may have it set too low for your system.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 09:58:08
(permalink)
☄ Helpfulby meh 2015/03/12 13:55:35
Also note that Amplitube has several options in preferences to change how much CPU it draws. In many cases you can "throttle it down" and not notice any sonic degradation. Also make sure you have the most recent Amplitube update. I like Ampiltube a lot, but it has some issues. For example on my computer, Studio One Pro won't load AT because it has crashed the program in the past, so now SOP has fenced it off. I'm going to try forcing a load again to see if any updates I did in the past made a difference.
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 10:19:46
(permalink)
☄ Helpfulby meh 2015/03/12 13:55:30
I've been having "issues" with Amp3 for a bit. Seems to work OK in X3x86 but not in X3x64. Cake support suggests a re-intall of Amp3; didn't help. Delete (or rename) the aud.ini file in C:\users\yourname\AppData\Roaming\Cakewalk\Sonar Platinum\ This solved some random dropout issues for me (this was making me CRAZY! Probably explains my occasional "surly" mood here on the forum; sorry for that  ). UFX dropping out at 2048; WTF, over???? Hoping it will "solve" my Amp3 issues as well. Holding off installing Platinum until I get everything sorted. Testing later today... Tom
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM  RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 11:23:04
(permalink)
Beagle
which driver mode are you set to? what is your latency set to? you may have it set too low for your system.
Buffers In Playback Queue: 2 Effective latency a 44kHz/stereo: 5.8 msec ASIO Panel Input: 11.6 msec, 512 samples Output: 5.8 msec, 256 samples Total Roundtrip: 17.4 msec, 768 sample Anderton
Also note that Amplitube has several options in preferences to change how much CPU it draws. In many cases you can "throttle it down" and not notice any sonic degradation. Also make sure you have the most recent Amplitube update.
Craig I think you are talking about the Amplitude Preferences? I have the most recent update tia for all the help rafone
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
DeeringAmps
Max Output Level: -49 dBFS
- Total Posts : 2614
- Joined: 2005/10/03 10:29:25
- Location: Seattle area
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 15:35:01
(permalink)
So far so good here after the aud.ini re-set!
T
Tom Deering Tascam FW-1884 User Resources Page Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins Win10x64 StudioCat Pro Studio Coffee Lake 8086k 32gb RAM RME UFX (Audio) Tascam FW-1884 (Control) in Win 10x64 Pro
|
Beagle
Max Output Level: 0 dBFS
- Total Posts : 50621
- Joined: 2006/03/29 11:03:12
- Location: Fort Worth, TX
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 16:18:18
(permalink)
☄ Helpfulby meh 2015/03/12 13:55:15
meh
Beagle
which driver mode are you set to? what is your latency set to? you may have it set too low for your system.
Buffers In Playback Queue: 2
Effective latency a 44kHz/stereo: 5.8 msec
ASIO Panel
Input: 11.6 msec, 512 samples
Output: 5.8 msec, 256 samples
Total Roundtrip: 17.4 msec, 768 sample
Anderton
Also note that Amplitube has several options in preferences to change how much CPU it draws. In many cases you can "throttle it down" and not notice any sonic degradation. Also make sure you have the most recent Amplitube update.
Craig I think you are talking about the Amplitude Preferences?
I have the most recent update
tia for all the help
rafone
you might want to try to increase your latency and see if that helps. amplitube is a big resource hog. click on that ASIO PANEL button, that will bring up the Tascam software to control the hardware buffers, increase those (not the same thing as the number of buffers in playback queue, just leave those at 2). increase to about 2x what you currently have and see if that helps. if not, increase some more.
|
meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/10 16:22:43
(permalink)
DeeringAmps
I've been having "issues" with Amp3 for a bit.
Delete (or rename) the aud.ini file in C:\users\yourname\AppData\Roaming\Cakewalk\Sonar Platinum\
This solved some random dropout issues for me (this was making me CRAZY! Probably explains my occasional "surly" mood here on the forum; sorry for that ).
Tom
That did the trick...thanks Tom rafone
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Platinum: Crackling and poping during playback and crashing regularly
2015/03/12 09:24:19
(permalink)
☄ Helpfulby meh 2015/03/12 13:55:08
meh
Craig I think you are talking about the Amplitude Preferences?
Yes. Even though you have things working, it's worth investigating those, you can often save a lot of CPU power.
|