meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
[Solved] Channel Tool not working in Platinum
If I try to insert Channel Tools it kills the audio and I have to re-boot Sonar to fix it. Anyone else?
rafone
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/29 11:06:46
(permalink)
There was another thread with near identical title a while ago, but the OP never responded to questions, so it was not resolved: http://forum.cakewalk.com/Channel-tools-pops-loudly-and-kills-audio-m3178935.aspx I have been using Channel Tools to address that PDC-Not-Applied-to-Sends issue with Addictive Drums, and it's been working fine. Can you reproduce it in a clean project started form the Normal template? Do you have X3, and is it okay there? Have you tried toggling audio preferences like 64-bit Double Precision Engine, Always Stream Audio Through Effects or Multiprocessor support?
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
gcolbert
Max Output Level: -67 dBFS
- Total Posts : 1176
- Joined: 2010/11/13 18:34:06
- Location: Windsor Mill, MD
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/29 16:06:30
(permalink)
On current projects, I'm only using the delay segment of Channel Tools, but I'm not experiencing any problems with it. I have tried inserting it with a project playing (not something I normally do) and it did not cause any issues. I also have X3 on the box with older projects created in X3. I'm not seeing any problems there.
Win 8.1, Sonar Platinum (Cambridge), VS-100.
Double Precision is off.
Glen
Platinum / VS-100 / 12 GB RAM / Win 10 Pro / AMD A8 / MP Touch MonitorsPlatinum / on-board audio / 4 GB RAM /Win 10 Pro / HP dm4 Laptop / stuffTHpfft!
|
sharke
Max Output Level: 0 dBFS
- Total Posts : 13933
- Joined: 2012/08/03 00:13:00
- Location: NYC
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/29 16:23:24
(permalink)
I have had the same problem with Channel Tools on an off for ages. Relaunching the project is the only solution. I only used CT to narrow or pan stereo images anyway, and I have found I can do that just as easily with the Flux Stereo Tool which is free (and doesn't crash Sonar).
JamesWindows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
|
millzy
Max Output Level: -73 dBFS
- Total Posts : 890
- Joined: 2005/01/28 20:32:51
- Location: Melbourne, Australia
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/30 00:26:51
(permalink)
I had my first Platinum issue a few weeks back after installing Channel Tools into the fx bin of a track (post Pro Channel.) The project froze and all the PC module level lights hit red and that was it. I had to close down project. I re-opened it, re-installed Channel Tools, and all was fine and has been ever since. Really weird. I always use Channel Tools and have never had an issue with it. The only thing I can think of is that I was looping a section of the project at the time, and I know there were some changes made to looping in Sonar. Anyway, I haven't been able to reproduce it since, but thought I'd share.
Millzy i7 3770K, 16gb ram, Samsung EVO SSD, 2 x WD drives, RME Babyface, Win 10 (x64), Cakewalk by Bandlab, heaps of other stuff.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/30 03:52:09
(permalink)
The only problem I've ever had with Channel Too,s was when some presets went missing, back in the days of X1
I use it on all of my projects.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
pwalpwal
Max Output Level: -43 dBFS
- Total Posts : 3249
- Joined: 2015/01/17 03:52:50
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/30 06:07:24
(permalink)
does the new boz pc plug make some of this redundant?
|
mikedocy
Max Output Level: -67 dBFS
- Total Posts : 1157
- Joined: 2007/05/09 23:00:37
- Location: Cleveland, Ohio
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/30 10:49:40
(permalink)
I had this exact problem a few years ago when Channel Tools was first released.
An updated version of Sonar solved the problem. Presumably, Channel Tools was updated.
Is it possible that you are running an older version of Channel Tools?
|
meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/30 16:29:53
(permalink)
Solved....deleted the AUD.ini and CT now works,,,,
thx for the help
rafone
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
Fabio Rubato
Max Output Level: -81 dBFS
- Total Posts : 500
- Joined: 2006/09/01 21:51:29
- Location: Australia
- Status: offline
Re: Channel Tool not working in Platinum
2015/03/31 03:40:11
(permalink)
sharke
I have had the same problem with Channel Tools on an off for ages. Relaunching the project is the only solution. I only used CT to narrow or pan stereo images anyway, and I have found I can do that just as easily with the Flux Stereo Tool which is free (and doesn't crash Sonar).
Work in Plt too?
Sonar: Platinum, (X3e) - x64 PC: Win10 Pro 64; Computer: Gigabyte Z68X-UD3R-B3; Intel i7, 2600k @ 4.2 (8 Cores); 16 GB Corsair Ram; Visual Card: Gigabyte GTX 580; Audio Interface: RME UFX; Monitors: Adam A77X, Sub8; Midi Controllers: Komplete Kontrol S88, Novation Bass Station 2; NI Maschine Mk 2; Other Hardware: Joe Meek Twin Q Dual Studio Channel; Mics: RODE NT2-A, ASTON Spirit Latest Song: Lay Down Before the War
|