Mosvalve
Max Output Level: -67 dBFS
- Total Posts : 1194
- Joined: 2009/11/20 20:49:33
- Location: New Jersey
- Status: offline
[Solved] The Little T on the automation Write Button
I just noticed this. What does it mean? Just curious.
BobV ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU, Windows 10 Pro 64bit, , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub, and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
|
konradh
Max Output Level: -42 dBFS
- Total Posts : 3325
- Joined: 2006/01/16 16:07:06
- Status: offline
Re: The Little T on the automation Write Button
2015/03/29 14:43:30
(permalink)
This must only apply to newer versions. I don't see it.
Konrad Current album and more: http://www.themightykonrad.com/ Sonar X1d Producer. V-Studio 700. PC: Intel i7 CPU 3.07GHz, 12 GB RAM. Win 7 64-bit. RealGuitar, RealStrat, RealLPC, Ivory II, Vienna Symphonic, Hollywood Strings, Electr6ity, Acoustic Legends, FabFour, Scarbee Rick/J-Bass/P-Bass, Kontakt 5. NI Session Guitar. Boldersounds, Noisefirm. EZ Drummer 2. EZ Mix. Melodyne Assist. Guitar Rig 4. Tyros 2, JV-1080, Kurzweil PC2R, TC Helicon VoiceWorks+. Rode NT2a, EV RE20. Presonus Eureka. Rokit 6s.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: The Little T on the automation Write Button
2015/03/29 14:57:40
(permalink)
It means you're in Touch Mode. Track Inspector > Track > Automation > Write Mode The other options are Overwrite and Latch. This has been in Sonar since, I think, X2 onwards.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re: The Little T on the automation Write Button
2015/03/29 15:18:23
(permalink)
Yes Colin has it. X2 onwards has three different automation write modes. Touch, Latch & Overwrite. They relate to how existing automation envelopes are treated when writing (recording) automation.
|
Mosvalve
Max Output Level: -67 dBFS
- Total Posts : 1194
- Joined: 2009/11/20 20:49:33
- Location: New Jersey
- Status: offline
Re: The Little T on the automation Write Button
2015/03/30 17:16:45
(permalink)
Thanks guys. I never realized Sonar had these three types of automation. Cool..
BobV ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU, Windows 10 Pro 64bit, , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub, and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: The Little T on the automation Write Button
2015/03/30 21:49:01
(permalink)
and "Touch Mode" means what exactly?
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re: The Little T on the automation Write Button
2015/03/30 22:01:21
(permalink)
☄ Helpfulby joden 2015/03/30 22:35:14
Write Mode. This drop-down menu lets you choose the automation write mode:
Touch. Touch mode overwrites any existing automation data for the currently armed parameter only when the parameter is moved with the mouse or a MIDI controller. Automation writing stops when the parameter is released, and the parameter returns to any previously automated position.
Overwrite. Overwrite mode overwrites any existing automation data for the currently armed parameter while the transport is rolling, even if you don’t touch the parameter.
Latch. Latch Mode is similar to Touch mode; new automation data overwrites existing automation data when you move a control. However, when you release the parameter, it will remain “latched” into its current position and continue to overwrite any existing automation data until playback stops.
|
Mosvalve
Max Output Level: -67 dBFS
- Total Posts : 1194
- Joined: 2009/11/20 20:49:33
- Location: New Jersey
- Status: offline
Re: The Little T on the automation Write Button
2015/03/30 22:01:59
(permalink)
When the write mode is enabled the automation will begin as soon as you touch and move the fader, pan knob etc. and stop automating when you release it and start automating again when you touch it.
BobV ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU, Windows 10 Pro 64bit, , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub, and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
|
joden
Max Output Level: -65 dBFS
- Total Posts : 1263
- Joined: 2007/09/22 17:03:46
- Status: offline
Re: The Little T on the automation Write Button
2015/03/30 22:32:21
(permalink)
John Write Mode. This drop-down menu lets you choose the automation write mode:
Touch. Touch mode overwrites any existing automation data for the currently armed parameter only when the parameter is moved with the mouse or a MIDI controller. Automation writing stops when the parameter is released, and the parameter returns to any previously automated position.
Overwrite. Overwrite mode overwrites any existing automation data for the currently armed parameter while the transport is rolling, even if you don’t touch the parameter.
Latch. Latch Mode is similar to Touch mode; new automation data overwrites existing automation data when you move a control. However, when you release the parameter, it will remain “latched” into its current position and continue to overwrite any existing automation data until playback stops.
Cool, thanks much!
|
John
Forum Host
- Total Posts : 30467
- Joined: 2003/11/06 11:53:17
- Status: offline
Re: The Little T on the automation Write Button
2015/03/30 23:40:01
(permalink)
|
Mosvalve
Max Output Level: -67 dBFS
- Total Posts : 1194
- Joined: 2009/11/20 20:49:33
- Location: New Jersey
- Status: offline
Re: The Little T on the automation Write Button
2015/03/31 08:17:32
(permalink)
Yes what John said. Thanks for the clear description John.
BobV ASUS Prime Z370-P - Intel Core i7+ 8700K 3.7GHZ 16GB Memory, Intel HD Graphics 630 GPU, Windows 10 Pro 64bit, , Sonar Platinum 64bit, Motu 828MK3 Hybrid, Warm Audio TB12 Pre, Warm Audio WA273 Pre, AEA RPQ 500 Pre, Warm Audio WA76 Compressor, Presonus D8 Pre, Tonelux EQ5P 500 Eq, Kush Electra 500 Eq, Lindell PEX 500 Eq, Yamaha 80M monitors with HS10W Sub, and a bunch of other good stuff. I have a Roland Juno-106 that's looking for a new home. PM me.
|