View Program Changes in PRV?

Author
Post
Essentials Only Full Version
rogeriodec
Max Output Level: -75 dBFS
  • Total Posts : 753
  • Joined: 2004/04/09 13:55:04
  • Location: Brazil
  • Status: offline
2015/04/03 14:36:21 (permalink)

View Program Changes in PRV?

In several research I have done to find out how I can group multiple instruments in a single track (in my case I use the Kontakt 5), the most elegant I found was the sending of Bank/Patch Changes (Program Changes).
I can see the patch changes signs at track view, but I can not for the Piano Roll View.
Would anyone tell me how can I view the program changes in PRV?

rogeriodec.com.br


* Cakewalk By Bandlabs (always lastest versions), Window 10 x64
* Focusrite Scarlett Solo Audio Interface
* Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
* 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
* Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
* 3 LCD Monitors
* Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
#1

4 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: View Program Changes in PRV? 2015/04/03 15:16:07 (permalink)
    The PRV cannot show program change messages. The Event List view will let you add/show/edit them.
     
     

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    rogeriodec
    Max Output Level: -75 dBFS
    • Total Posts : 753
    • Joined: 2004/04/09 13:55:04
    • Location: Brazil
    • Status: offline
    Re: View Program Changes in PRV? 2015/07/06 22:42:33 (permalink)
    Is there any way to visualize bank changes in Track View?

    rogeriodec.com.br


    * Cakewalk By Bandlabs (always lastest versions), Window 10 x64
    * Focusrite Scarlett Solo Audio Interface
    * Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
    * 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
    * Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
    * 3 LCD Monitors
    * Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
    #3
    williamcopper
    Max Output Level: -68 dBFS
    • Total Posts : 1120
    • Joined: 2014/11/03 09:22:03
    • Location: Virginia, USA
    • Status: offline
    Re: View Program Changes in PRV? 2015/07/07 03:23:35 (permalink)
    Please put in a feature request in the feedback forum.   I've wanted this too.   My workaround is to always keep an Event List window open that parallels the selected track in PRV.    This requires an extra monitor, or enough screen space, though, plus the extra housekeeping to keep both windows focused on the correct track. 
    #4
    rogeriodec
    Max Output Level: -75 dBFS
    • Total Posts : 753
    • Joined: 2004/04/09 13:55:04
    • Location: Brazil
    • Status: offline
    Re: View Program Changes in PRV? 2015/07/07 09:54:46 (permalink)
    williamcopper
    Please put in a feature request in the feedback forum.   I've wanted this too.   My workaround is to always keep an Event List window open that parallels the selected track in PRV.    This requires an extra monitor, or enough screen space, though, plus the extra housekeeping to keep both windows focused on the correct track. 





    It's there: http://forum.cakewalk.com/FindPost/3251820

    rogeriodec.com.br


    * Cakewalk By Bandlabs (always lastest versions), Window 10 x64
    * Focusrite Scarlett Solo Audio Interface
    * Intel i7-4790K CPU @ 4.00 GHz / ASROCK EXTREME 4 Z97 Mobo
    * 2 SSD Samsung Evo 250 Gb (RAID-0) + 1 Western Digital 2 Tb + 1 Seagate 1 Tb
    * Onboard video / 16 Gb RAM HyperX Fury 1600 Mhz
    * 3 LCD Monitors
    * Axiom 61 MIDI Controller, Tapco S5 Active Studio Monitors
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1