Sonar not remembering audio outputs??

Author
Post
Essentials Only Full Version
Rockin*Gio
Max Output Level: -90 dBFS
  • Total Posts : 8
  • Joined: 2009/06/03 14:04:07
  • Status: offline
2015/04/07 13:30:45 (permalink)

Sonar not remembering audio outputs??

I recently added a second Prism “Orpheus” firewire audio interface to my recording setup, giving me 20 physical outputs into my console for mixing OTB. Every time I open a saved project, Sonar fails to remember the output routing for all tracks and busses. Doesn’t matter if the project is a single audio track or a complex one utilizing all outputs…the results are the same. Getting very frustrated having to remember (and then reset) all output routings, hoping someone may be able to advise me on a fix.

Thanks,
-Bob G.
#1

4 Replies Related Threads
    Bristol_Jonesey
    Max Output Level: 0 dBFS
    • Total Posts : 16775
    • Joined: 2007/10/08 15:41:17
    • Location: Bristol, UK
    • Status: offline
    Re: Sonar not remembering audio outputs?? 2015/04/07 14:32:07 (permalink)
    When you say a second Prism, are you attempting to run more than one, and also using ASIO?
     
    If so, this will not work and you'll get the symptoms you describe.
     
    Switch driver mode to WDM
     
    ASIO will only support one interface at a time

    CbB, Platinum, 64 bit throughout
    Custom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
    #2
    konradh
    Max Output Level: -42 dBFS
    • Total Posts : 3325
    • Joined: 2006/01/16 16:07:06
    • Status: offline
    Re: Sonar not remembering audio outputs?? 2015/04/07 14:43:40 (permalink)
    Sorry I don't have any advice, but I have been plagued with this in the past.  I had to stop using the Fantom VS synth built into the VS-700 because of this.  More recently, I had bad issues with this because of EZDrummer 2 (which seem to be resolved since EZD2's most recent update).
     
    Sonar must have some method of handling outputs that is different from other DAWs and therefore problematic with certain products.

    Konrad
    Current album and more: http://www.themightykonrad.com/

    Sonar X1d Producer. V-Studio 700. PC: Intel i7 CPU 3.07GHz, 12 GB RAM. Win 7 64-bit. RealGuitar, RealStrat, RealLPC, Ivory II, Vienna Symphonic, Hollywood Strings, Electr6ity, Acoustic Legends, FabFour, Scarbee Rick/J-Bass/P-Bass, Kontakt 5. NI Session Guitar. Boldersounds, Noisefirm. EZ Drummer 2. EZ Mix. Melodyne Assist. Guitar Rig 4. Tyros 2, JV-1080, Kurzweil PC2R, TC Helicon VoiceWorks+. Rode NT2a, EV RE20. Presonus Eureka.  Rokit 6s. 
    #3
    Rockin*Gio
    Max Output Level: -90 dBFS
    • Total Posts : 8
    • Joined: 2009/06/03 14:04:07
    • Status: offline
    Re: Sonar not remembering audio outputs?? 2015/04/07 17:28:51 (permalink)
    Yes, I am running two Orpheus under ASIO, linked via firewire so they show up as one interface in Sonar. They work perfectly this way, no performance issues at all. All inputs and outputs show up and are accessible from inside Sonar. Only, when I reopen a saved project, all outputs default to one of the units. I then have to reassign all the physical outputs from memory, once I do that the project plays back flawlessly. Hope this helps discribe my dilemma a little better as I can't work this way much longer...takes way too long to reset an entire project...every time.  
    #4
    jih64
    Max Output Level: -75 dBFS
    • Total Posts : 797
    • Joined: 2014/01/30 20:59:40
    • Location: Studio One 3
    • Status: offline
    Re: Sonar not remembering audio outputs?? 2015/04/07 18:10:10 (permalink)
    Bristol_Jonesey
    When you say a second Prism, are you attempting to run more than one, and also using ASIO?
     
    If so, this will not work and you'll get the symptoms you describe.
     
    Switch driver mode to WDM
     
    ASIO will only support one interface at a time



    That is not necessarily true, if the Audio interface/Sound card and or drivers support multiple interfaces/cards/devices, then away you go, ASIO  and all. Had multiple M-Audio devices for years, 4 x Delta 1010's/ 44's etc . . .
    #5
    Jump to:
    © 2025 APG vNext Commercial Version 5.1