Helpful ReplySonarworks | headphone calibration profiles added

Page: < 12 Showing page 2 of 2
Author
cclarry
Max Output Level: 0 dBFS
  • Total Posts : 20964
  • Joined: 2012/02/07 09:42:07
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 16:17:11 (permalink)
I got a pair of ATH-M50's for $79..and I had $20 in coupons...
so they cost me $59...they do a decent job...

I agree, I can't afford $300 for a set of headphones...
I do the best I can with what I have...LOL


#31
interpolated
Max Output Level: -74 dBFS
  • Total Posts : 830
  • Joined: 2015/03/26 17:34:58
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 17:13:40 (permalink)
This is the problem when you are used to deliberately eq-shaped drivers and then you move to reference models. The previous sound you are used to disappears and also that they need a dedicated amplifier to get the best out of them. I'm just listening to a Rammstein MP3 with the EQ button enabled (Hi-Fi like smile eq to the output) and without being bias, you would need to spend a lot of money to get something consumer level to get the same quality.
 
If I could get the same quality out of earphones it would be fantastic. Well it is possible perhaps for a small fortune. As I am essentially a keen amateur I would rather invest within my needs.
 
Audio Technica were on my shortlist along with Grado, Sennheiser, Beyer Dynamic. Although I had AKG K271 Mk. 2 before which was my first step into higher quality headphones. 

I have computer stuff.
 
https://soundcloud.com/sigmadelta
#32
cclarry
Max Output Level: 0 dBFS
  • Total Posts : 20964
  • Joined: 2012/02/07 09:42:07
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 17:26:19 (permalink)
I get some pretty decent mixes out of my ATH-M50's...

this was done with them entirely...

https://soundcloud.com/cclarry/shine-the-light-lws
 
It was a mix I had to do for a class I was taking in Pro Tools...


#33
sharke
Max Output Level: 0 dBFS
  • Total Posts : 13933
  • Joined: 2012/08/03 00:13:00
  • Location: NYC
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 17:44:05 (permalink)
The M50's are great, as long as you remember there's somewhat of a bass boost. I also have a pair of Grado's and the two are chalk and cheese sound wise. The Grado's are much sweeter in the upper mids and highs, while the M50's have a firmer bottom (heh heh) and are flatter overall. I would listen to Steely Dan through the Grado's and EDM styles through he M50's, but I wouldn't use the Grado's for mixing because I don't think I could help myself compensating for the quieter bass.

I also have a cheaper pair of AT's for the gym, M30's or something like that. For the price (around $70 not on sale) they are surprisingly good.

James
Windows 10, Sonar SPlat (64-bit), Intel i7-4930K, 32GB RAM, RME Babyface, AKAI MPK Mini, Roland A-800 Pro, Focusrite VRM Box, Komplete 10 Ultimate, 2012 American Telecaster!
#34
cclarry
Max Output Level: 0 dBFS
  • Total Posts : 20964
  • Joined: 2012/02/07 09:42:07
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 17:51:18 (permalink)
sharke
The M50's are great, as long as you remember there's somewhat of a bass boost. I also have a pair of Grado's and the two are chalk and cheese sound wise. The Grado's are much sweeter in the upper mids and highs, while the M50's have a firmer bottom (heh heh) and are flatter overall. I would listen to Steely Dan through the Grado's and EDM styles through he M50's, but I wouldn't use the Grado's for mixing because I don't think I could help myself compensating for the quieter bass.

I also have a cheaper pair of AT's for the gym, M30's or something like that. For the price (around $70 not on sale) they are surprisingly good.



I agree Sharke...I had ATH-M40's and they were great...
The 50's were a steal that I couldn't pass up...and glad I didn't...
But if I had my wish...I'd wish for this...

http://www.sweetwater.com/store/detail/1038B
 
Only $8500...chump change...LOL


#35
interpolated
Max Output Level: -74 dBFS
  • Total Posts : 830
  • Joined: 2015/03/26 17:34:58
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 18:08:43 (permalink)
cclarry
I get some pretty decent mixes out of my ATH-M50's...

this was done with them entirely...

https://soundcloud.com/cclarry/shine-the-light-lws
 
It was a mix I had to do for a class I was taking in Pro Tools...




Pretty good, very nicely done.

I have computer stuff.
 
https://soundcloud.com/sigmadelta
#36
cclarry
Max Output Level: 0 dBFS
  • Total Posts : 20964
  • Joined: 2012/02/07 09:42:07
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/12 18:41:30 (permalink)
Thanx Interp...

As has always been stated...having good source tracks is essential...
It certainly makes mixing much more fun and whole lot easier...LOL


#37
interpolated
Max Output Level: -74 dBFS
  • Total Posts : 830
  • Joined: 2015/03/26 17:34:58
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/17 18:49:04 (permalink)
I am wondering if this really going to be worth the investment. 
For example, if you also painstakingly created a EQ setting and then A/B the mix with the headphone correction. How do you tell if your mix is going to be "correct"?
 
Is it possible to create a bus mix, invert the corrected input and sum the difference (drawn as a waveform). The ideal output would be a straight-line with no very little phase difference. Why go to all this trouble? Something to chew on.
 
post edited by interpolated - 2015/04/17 19:03:29

I have computer stuff.
 
https://soundcloud.com/sigmadelta
#38
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
  • Total Posts : 26036
  • Joined: 2006/09/17 11:23:23
  • Location: Everett, WA USA
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/17 19:55:41 (permalink) ☄ Helpfulby cclarry 2015/04/17 22:52:07
How do you tell if your mix is going to be "correct"?

 
Good question. You certainly aren't going to know with certainty based on what you hear in headphones alone, no matter how good they are.
 
However, by correcting your headphones' shortcomings, you can at least avoid tailoring your mix specifically to those shortcomings. That's really the whole idea.


All else is in doubt, so this is the truth I cling to. 

My Stuff
#39
interpolated
Max Output Level: -74 dBFS
  • Total Posts : 830
  • Joined: 2015/03/26 17:34:58
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/18 10:05:43 (permalink)
OK. I couldn't really make out what frequencies are being boosted or attenuated in the display window for the graph in the plug-in display. Do you know if the graph is logarithmic or linear? I know there is a frequency response switch although I will still play about with the idea of this plug-in. 
 
In the grand scheme of things, it's certainly cheaper than acoustically treating your studio.
post edited by interpolated - 2015/04/18 10:21:31

I have computer stuff.
 
https://soundcloud.com/sigmadelta
#40
SF_Green
Max Output Level: -62 dBFS
  • Total Posts : 1403
  • Joined: 2005/09/13 20:37:55
  • Location: San Francisco
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/18 15:55:32 (permalink)
dlesaux
Still waiting for a calibration profile for my KRK headphones. I hope they get to these soon. The buzz about this tool has been very positive so far.




+1  KNS 8400

AMD FX-8370, Gigabyte 990FXA-UD3,  Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121
Cubase Pro 10.0.5, SonarPt-2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
#41
dlesaux
Max Output Level: -70 dBFS
  • Total Posts : 1034
  • Joined: 2009/09/13 09:25:18
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/18 21:33:36 (permalink)
Be sure to send them an email requesting the KNS 8400 headphones.  I doubt they monitor this forum.  Every request will help!
 
 
 
 

Peace!
Daniel

Sonar Platinum - 2017.10 and PreSonus Studio One 3.5.5
Windows 10 64 bit
Studiocat Skylake Desktop PC with Intel i7 6700k processor @ 4.20 GHz / 16G RAM 
Focusrite Scarlett 2i2 Audio Interface and Cakewalk UM-2G Midi Interface

Check out my website
#42
Vastman
Max Output Level: -50 dBFS
  • Total Posts : 2508
  • Joined: 2006/08/30 02:49:18
  • Location: Oakland, CA
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/19 00:00:28 (permalink)
SF_Green
dlesaux
Still waiting for a calibration profile for my KRK headphones. I hope they get to these soon. The buzz about this tool has been very positive so far.




+1  KNS 8400





Dana
We make the future... Climate Change Music
VastMaschine:SP4L/W10/i74930K/32GB/RME/CAD E100s; The Orchestra! NOVO!/Inspire/BohemianViolin&Cello, ARK1&2,/MinimalCapriccioMaximoSoto/OE1&2, Action&Emotive/Omni2/Tril/RMX/All OrangeTree/Falcon/APE Jugs/Alpha&Bravo/BFD3 & SD3
Gravity/DM307/AEON/DM/Damage/Diva/HZebra/Hive/Diversion/VC4/Serum/Alchemy/blablabla
Spitfire/8DIO/SL/KH/EW/NI; Shred1&2/AGF,G,M&T Torch&Res&Ren/GD-6; Ibanez SR1200&SR505
NOVAX FanFret Tele&Strat 
#43
Vastman
Max Output Level: -50 dBFS
  • Total Posts : 2508
  • Joined: 2006/08/30 02:49:18
  • Location: Oakland, CA
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/19 00:05:45 (permalink)
dlesaux
Be sure to send them an email requesting the KNS 8400 headphones.  I doubt they monitor this forum.  Every request will help!
 
 
 Done!  thanks...
 
 





Dana
We make the future... Climate Change Music
VastMaschine:SP4L/W10/i74930K/32GB/RME/CAD E100s; The Orchestra! NOVO!/Inspire/BohemianViolin&Cello, ARK1&2,/MinimalCapriccioMaximoSoto/OE1&2, Action&Emotive/Omni2/Tril/RMX/All OrangeTree/Falcon/APE Jugs/Alpha&Bravo/BFD3 & SD3
Gravity/DM307/AEON/DM/Damage/Diva/HZebra/Hive/Diversion/VC4/Serum/Alchemy/blablabla
Spitfire/8DIO/SL/KH/EW/NI; Shred1&2/AGF,G,M&T Torch&Res&Ren/GD-6; Ibanez SR1200&SR505
NOVAX FanFret Tele&Strat 
#44
Vastman
Max Output Level: -50 dBFS
  • Total Posts : 2508
  • Joined: 2006/08/30 02:49:18
  • Location: Oakland, CA
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/21 01:33:21 (permalink)
Hey, all got an email back saying they've put the  KRK's on their list for their next update!!! No time indicated
 

Dana
We make the future... Climate Change Music
VastMaschine:SP4L/W10/i74930K/32GB/RME/CAD E100s; The Orchestra! NOVO!/Inspire/BohemianViolin&Cello, ARK1&2,/MinimalCapriccioMaximoSoto/OE1&2, Action&Emotive/Omni2/Tril/RMX/All OrangeTree/Falcon/APE Jugs/Alpha&Bravo/BFD3 & SD3
Gravity/DM307/AEON/DM/Damage/Diva/HZebra/Hive/Diversion/VC4/Serum/Alchemy/blablabla
Spitfire/8DIO/SL/KH/EW/NI; Shred1&2/AGF,G,M&T Torch&Res&Ren/GD-6; Ibanez SR1200&SR505
NOVAX FanFret Tele&Strat 
#45
dlesaux
Max Output Level: -70 dBFS
  • Total Posts : 1034
  • Joined: 2009/09/13 09:25:18
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/21 20:36:08 (permalink)
Vastman
Hey, all got an email back saying they've put the  KRK's on their list for their next update!!! No time indicated
 


Not holding my breath but this sounds promising!  I do all of mixing on headphones so I'm very interested!  Thanks for the update Vastman!  Maybe you were the one who put them over the top!

Peace!
Daniel

Sonar Platinum - 2017.10 and PreSonus Studio One 3.5.5
Windows 10 64 bit
Studiocat Skylake Desktop PC with Intel i7 6700k processor @ 4.20 GHz / 16G RAM 
Focusrite Scarlett 2i2 Audio Interface and Cakewalk UM-2G Midi Interface

Check out my website
#46
SF_Green
Max Output Level: -62 dBFS
  • Total Posts : 1403
  • Joined: 2005/09/13 20:37:55
  • Location: San Francisco
  • Status: offline
Re: Sonarworks | headphone calibration profiles added 2015/04/21 20:59:28 (permalink)
Vastman
Hey, all got an email back saying they've put the  KRK's on their list for their next update!!! No time indicated
 




Sweet

AMD FX-8370, Gigabyte 990FXA-UD3,  Win7x64 SP1, 16Gb CorsairDDR3-1600, GeForce GTX 950 (390.65), SSD 525Gb (OS), SATA 3 & 1.5Tb, MOTU microlite, RME FireFace 800 (D 3.124, fw 2.77), UAD-2Q, Adam A7X, A-800 PRO, CC121
Cubase Pro 10.0.5, SonarPt-2017.10 (x64), Reason10.2, Live 10.0.5 Suite, Wavelab Elements 9.5.40, Komplete10Ult, POD Farm2.5, Omnisphere2.5, BFD3, Alesis QS7.1, Arturia BeatStep Pro, POD HD500, Alesis ControlPad, ARP Omni, many things with strings. GrSltz My Studio
#47
Page: < 12 Showing page 2 of 2
Jump to:
© 2024 APG vNext Commercial Version 5.1