Locked[Solved] Under some circumstances, VocalSync FX Region is unable to be applied

Author
Post
Essentials Only Full Version
stickman393
Max Output Level: -60 dBFS
  • Total Posts : 1528
  • Joined: 2003/11/07 18:35:26
  • Status: offline
2015/04/05 23:56:51 (permalink)
5 (1)

[Solved] Under some circumstances, VocalSync FX Region is unable to be applied

The symptoms are this:
You attempt to apply a FX Region for VocalSync to a clip, and find that although the selected clip flickers, the editor doesn't open and the FX region is not applied.
 
It does not appear to be related to whether or not the clip was created by bounce-to-clip and/or does not have a clip "name".
Deleting the empty track directly below the track in which the clip is situation can cause the FX Region to subsequently be applied.
 
Submitted with sample project showing the problem as CWBRN-32387.
 
Resolved May 2015:
"After investigating this, it turned out that this problem is not a bug, but an incorrect setting. If you right-click on track 3 in the VS_Debug project attached to this report, you'll see that there is a checkmark next to "Set as Default VocalSync Guide Track." This means that when you add VocalSync to the audio on track 2, it attempts to synchronize with track 3, which is the default guide. Since track 3 is blank, VocalSync does not load, which is the flash that you saw.
In today's "Everett" update, this case is handled better. SONAR will display a message that VocalSync is set to use an empty region and the VocalSync window itself will now appear. This way, changing the guide track and continuing to work will be simple."
post edited by stickman393 - 2015/05/29 16:18:43
#1

7 Replies Related Threads
    Rob[at]Sound-Rehab
    Max Output Level: -47 dBFS
    • Total Posts : 2819
    • Joined: 2011/02/03 04:31:35
    • Location: Sound-Rehab, Austria
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/04/06 06:17:44 (permalink)
    0
    Thanks!
     
    This is exactly what I was struggling with yesterday, but I couldn't figure out what causes it / how to reproduce

    GOOD TUNES LAST FOREVER
      +++   Visit the Rehab   +++
     
    DAW: Platinum/X3e, win10 64 bit, i7-3930K (6x3.2GHz), Asus Sabertooth X79, 32 GB DDR3 1600MHz, ATI HD 5450, 120 GB SSD OCZ Agility3, 2x 1TB WD HDD SATA 600
    Audio-Interface: 2x MOTU 1248 AVB, Focusrite OctoPre, (Roland Octa-Capture)   Control-Surface: VS-700C 
    VSTi: WAVES, NI K10u, FabFilter, IK, ... (too many really) 
    #2
    Lord Tim
    Max Output Level: -74 dBFS
    • Total Posts : 837
    • Joined: 2003/11/10 10:33:43
    • Location: Australia
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/04/06 08:02:23 (permalink)
    0
    In some cases (not OP's case though - his fails regardless), this is fixed by giving the clip you're trying to add VocalSync on a name - bounced clips typically are unnamed, for example. If the name is blank then sometimes Region FX fails.

    WWW: www.lord.net.au  FB: www.facebook.com/lordtimofficial
    Bandlab: www.bandlab.com/lordtim
     
    Cakewalk by Bandlab / DAW: i7 M620 @ 2.67 GHz, 8 GB RAM, Win10 64 Bit [eng], TASCAM US-16x08 @ 5.8ms (22.7ms RTL) ASIO, Behringer UMX61 Keyboard Controller.
    #3
    stickman393
    Max Output Level: -60 dBFS
    • Total Posts : 1528
    • Joined: 2003/11/07 18:35:26
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/04/06 10:56:42 (permalink)
    0
    I couldn't reproduce the problem from scratch either. But fortunately I was able to reduce my working project to 4 tracks and 4 clips, and still demonstrate the issue.
     
    I don't mind if Cakewalk engineers have to listen to my crap backing vocals in order to fix this one. :-)
     
    Fingers crossed.
    #4
    majidfaizz
    Max Output Level: -90 dBFS
    • Total Posts : 1
    • Joined: 2015/04/09 07:06:11
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/04/09 07:11:31 (permalink)
    0
     If the name is blank then sometimes Region FX fails.?
     
     
     
    ________________
    raza
    #5
    stickman393
    Max Output Level: -60 dBFS
    • Total Posts : 1528
    • Joined: 2003/11/07 18:35:26
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/04/09 10:55:02 (permalink)
    0
    majidfaizz
     If the name is blank then sometimes Region FX fails.?
     



    The issue for which I placed the bug report has nothing to do with whether the clip has a name, or whether it was created from a "bounce to clip".
     
    Others are experiencing different, related issues when attempting to apply a RegionFX. 
     
    If you have a known set of steps to reproduce this, or similar problems, please submit a report in the Problem Reporter.
     
     
    #6
    stickman393
    Max Output Level: -60 dBFS
    • Total Posts : 1528
    • Joined: 2003/11/07 18:35:26
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/05/06 16:54:11 (permalink)
    0
    This issue has been submitted to development, which means they were able to reproduce it. Excellent...
    #7
    stickman393
    Max Output Level: -60 dBFS
    • Total Posts : 1528
    • Joined: 2003/11/07 18:35:26
    • Status: offline
    Re: [CWBRN-32387] Under some circumstances, VocalSync FX Region is unable to be applied 2015/05/29 16:14:49 (permalink)
    0
    Resolved in the Everett release. Yay!
    #8
    Jump to:
    © 2024 APG vNext Commercial Version 5.1