Metronome count-in double triggering when reaching the 1st beat of the loop

Author
Post
Essentials Only Full Version
Adralicus
Max Output Level: -89 dBFS
  • Total Posts : 73
  • Joined: 2011/11/05 09:18:21
  • Status: offline
2015/05/10 09:11:58 (permalink)

Metronome count-in double triggering when reaching the 1st beat of the loop

I notice that if you have loop enabled and set the metronome to do a one bar count-in, when it reaches the first beat of the looped section the metronome double triggers. Here's a video as proof.
 
http://www.screencast.com/t/e8uqfSUS
 
I sent in a report.
 
Regards
Martin

Sonar Platinum
Gigabyte GA-Z87X-UD3H | Intel Haswell i7 4770K @ 4.3 Mhz | 16GB DDR3 1600Mhz | Samsung 820 256GB SSD System Drive | 1 x Crucial 960gb SSD A/V Drive | 1 x Crucial 512 SSD Samples Drive | 1x Gigabyte GTX 660 2gb | 40" 4k Monitor |  RME Fireface 400 |Windows 8.1 x64
 
 
#1

6 Replies Related Threads
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: Metronome count-in double triggering when reaching the 1st beat of the loop 2015/05/10 15:43:27 (permalink)
    I can't reproduce that right offhand. What interface and driver mode? If using WDM with more than one interface, make sure you have the correct interface driver selected as Record Timing Master. Are there any FX on buses that we can't see in the video?

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #2
    Adralicus
    Max Output Level: -89 dBFS
    • Total Posts : 73
    • Joined: 2011/11/05 09:18:21
    • Status: offline
    Re: Metronome count-in double triggering when reaching the 1st beat of the loop 2015/05/10 16:22:47 (permalink)
    It's just a single track project I'm using Asio drivers for the Fireface 400.

    Sonar Platinum
    Gigabyte GA-Z87X-UD3H | Intel Haswell i7 4770K @ 4.3 Mhz | 16GB DDR3 1600Mhz | Samsung 820 256GB SSD System Drive | 1 x Crucial 960gb SSD A/V Drive | 1 x Crucial 512 SSD Samples Drive | 1x Gigabyte GTX 660 2gb | 40" 4k Monitor |  RME Fireface 400 |Windows 8.1 x64
     
     
    #3
    brundlefly
    Max Output Level: 0 dBFS
    • Total Posts : 14250
    • Joined: 2007/09/14 14:57:59
    • Location: Manitou Spgs, Colorado
    • Status: offline
    Re: Metronome count-in double triggering when reaching the 1st beat of the loop 2015/05/11 00:57:23 (permalink)
    Maybe try renaming your AUD.INI file, and see if the problem persists with the default one that SONAR creates. If not, compare the two files and see what's different. If it does persist... I dunno.
     
    BTW, I don't think it has any bearing on this issue, but I was surprised to see you're recording at 16-bit sample depth. You might want to change that to 24 in Preferences > Audio Data.

    SONAR Platinum x64, 2x MOTU 2408/PCIe-424  (24-bit, 48kHz)
    Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
    #4
    Doktor Avalanche
    Max Output Level: -32.5 dBFS
    • Total Posts : 4294
    • Joined: 2015/03/26 18:02:02
    • Status: offline
    Re: Metronome count-in double triggering when reaching the 1st beat of the loop 2015/05/11 01:06:52 (permalink)
    Update your audio interface drivers and firmware.
    #5
    Adralicus
    Max Output Level: -89 dBFS
    • Total Posts : 73
    • Joined: 2011/11/05 09:18:21
    • Status: offline
    Re: Metronome count-in double triggering when reaching the 1st beat of the loop 2015/05/11 08:31:16 (permalink)
    brundlefly
    Maybe try renaming your AUD.INI file, and see if the problem persists with the default one that SONAR creates. If not, compare the two files and see what's different. If it does persist... I dunno.
     
    BTW, I don't think it has any bearing on this issue, but I was surprised to see you're recording at 16-bit sample depth. You might want to change that to 24 in Preferences > Audio Data.




    Thanks I'll try renaming the file. I didn't realize Sonar defaults to 16bit so I've changed it to 24bit.

    Sonar Platinum
    Gigabyte GA-Z87X-UD3H | Intel Haswell i7 4770K @ 4.3 Mhz | 16GB DDR3 1600Mhz | Samsung 820 256GB SSD System Drive | 1 x Crucial 960gb SSD A/V Drive | 1 x Crucial 512 SSD Samples Drive | 1x Gigabyte GTX 660 2gb | 40" 4k Monitor |  RME Fireface 400 |Windows 8.1 x64
     
     
    #6
    Adralicus
    Max Output Level: -89 dBFS
    • Total Posts : 73
    • Joined: 2011/11/05 09:18:21
    • Status: offline
    Re: Metronome count-in double triggering when reaching the 1st beat of the loop 2015/05/11 08:31:58 (permalink)
    Doktor Avalanche
    Update your audio interface drivers and firmware.

    All drivers and firmware are the latest.

    Sonar Platinum
    Gigabyte GA-Z87X-UD3H | Intel Haswell i7 4770K @ 4.3 Mhz | 16GB DDR3 1600Mhz | Samsung 820 256GB SSD System Drive | 1 x Crucial 960gb SSD A/V Drive | 1 x Crucial 512 SSD Samples Drive | 1x Gigabyte GTX 660 2gb | 40" 4k Monitor |  RME Fireface 400 |Windows 8.1 x64
     
     
    #7
    Jump to:
    © 2025 APG vNext Commercial Version 5.1