Helpful ReplySample Tank 3 importing problem....

Author
Mesh
Max Output Level: 0 dBFS
  • Total Posts : 27360
  • Joined: 2009/11/27 14:08:08
  • Location: Online right here!
  • Status: offline
2015/05/21 09:26:15 (permalink)

Sample Tank 3 importing problem....

Using the latest version of ST3 (3.5.1), I've been unsuccessful in importing all my older ST2 libraries (about 45 GB which are all in my samples drive in the same default location when I unpacked the ST2 installer). When I click on "Browse" for the folder path (Import Legacy Instruments/Sounds (something like that)), all I get is the spinning blue circle (Win 'thinking') and it stays like that.  
So I uninstalled the latest version and installed the previous version (3.5), but still get the same results (I rebooted after each uninstall). For some reason it gets hung up when searching the folder path, but it does install the new ST3 sample library content upon initial installation.
 
Anyone else have this issue? What can I do to resolve this?
(Should I move the (ST2) 45 GB folder inside the ST3 samples folder?)......it still sucks that the "Browser" isn't working.
 
 
 
Of note, I did contact support prior to this problem (last week) as I was able to use the "Browse" function to import the Legacy sounds, but after about 10 min into importing, ST3 gave a message stating it "Stopped Working" and basically had to shut down (did this on numerous attempts).
 
IK support suggested I import 1 folder at a time (so I would have to sit there and manually import all 45 GB's, 1 folder at a time ) and not direct it to the main library folder that contained all the samples......(wow, I was thinking something isn't right with this picture ). I have other VST synths with huge libraries (Alchemy) and it's a very straight forward process when directing the browser to the file path where the sounds are.
 
Anyway, on my first attempt in following IK's advice, I ran into the problem I have now.
 
 
 
 
 
post edited by Mesh - 2015/05/21 09:32:21

Platinum Gaming DAW: AsRock Z77 Overclock Formula
I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
250GB OS SSD : 3TB HDD : 1TB Sample HDD
Win 10 Pro x 64 : NH-D14 CPU Cooler 
HIS IceQ  2GB HD 7870
Focusrite Scarlett 2i4
The_Forum_Monkeys
#1
BassDaddy
Max Output Level: -33 dBFS
  • Total Posts : 4232
  • Joined: 2012/12/31 13:55:58
  • Location: I'm an American. From America!
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/21 18:27:41 (permalink)
 
"IK support suggested I import 1 folder at a time (so I would have to sit there and manually import all 45 GB's, 1 folder at a time." Having to do a lot of work to make it function should be their problem, not yours. None of that happened when I imported my stuff 8 months ago or so. Hope they fix this soon.

It's Bass, not Bass.
i7 2700K, 16GB DDR3, 2 SSD sample drives and OS drive, HDD SATAIII for projects, 2 24" monitors
Focusrite Saffire Pro 24, Focusrite VRM Box, LAVA Lamp, SONAR Platinum 64 bit, Mackie MCU and 1 MCU XT, Akai Advance 49, Windows 10,
Komplete 9 Ultimate, Cakewalk, Toontrack, IK, AAS, XLN, UVI, Air Music Tech, Waves Factory, Sample Tek and Sonivox VSTi's. Overloud, T-Racks, Audio Damage, D16, Nomad Factory, Waves Gold FX 
#2
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
  • Total Posts : 26036
  • Joined: 2006/09/17 11:23:23
  • Location: Everett, WA USA
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 09:06:56 (permalink)
I did that, too - imported everything in stages. I don't remember clearly (it was 6 months ago) but I think I had some similar issue at the time when I first attempted to get them all at once.


All else is in doubt, so this is the truth I cling to. 

My Stuff
#3
Mesh
Max Output Level: 0 dBFS
  • Total Posts : 27360
  • Joined: 2009/11/27 14:08:08
  • Location: Online right here!
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 09:52:50 (permalink)
I'm still trying to figure out how to do this (it's actually 53.1 GB's that need importing). I was advised by IK support to go into the ST3 settings/compatibility/Run as Admin.......which I did.....still no luck.
 
Update and slight progress:
In trying out different things, I changed the ST3 library file path and was then able to use the "Browse" button to search for my older sample libraries. It started importing (all the libraries) and about 15 min into the import, it crashed: SampleTank 3.exe has stopped working.
 
I just closed it and will go back when I can spend a few hours in troubleshooting/figuring out the hidden tricks in how ST3 uses it import function. 

Platinum Gaming DAW: AsRock Z77 Overclock Formula
I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
250GB OS SSD : 3TB HDD : 1TB Sample HDD
Win 10 Pro x 64 : NH-D14 CPU Cooler 
HIS IceQ  2GB HD 7870
Focusrite Scarlett 2i4
The_Forum_Monkeys
#4
Fleer
Max Output Level: 0 dBFS
  • Total Posts : 8715
  • Joined: 2014/08/29 10:17:45
  • Location: Boston/Cambridge
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 10:25:30 (permalink)
Meshman, I'm feeling for ya.

"We're just two lost souls swimming in a fish bowl" (Wish You Were Here)
#5
bapu
Max Output Level: 0 dBFS
  • Total Posts : 86000
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 10:38:43 (permalink)
Fleerman, I'm feeling for you feeling for Meshman.
#6
Mesh
Max Output Level: 0 dBFS
  • Total Posts : 27360
  • Joined: 2009/11/27 14:08:08
  • Location: Online right here!
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 10:54:46 (permalink)
I'm fleeing from this feeling schmeeling group........you guys are like uhm totally freaking me out and stuff like OMG!!

Platinum Gaming DAW: AsRock Z77 Overclock Formula
I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
250GB OS SSD : 3TB HDD : 1TB Sample HDD
Win 10 Pro x 64 : NH-D14 CPU Cooler 
HIS IceQ  2GB HD 7870
Focusrite Scarlett 2i4
The_Forum_Monkeys
#7
Fleer
Max Output Level: 0 dBFS
  • Total Posts : 8715
  • Joined: 2014/08/29 10:17:45
  • Location: Boston/Cambridge
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 11:02:21 (permalink)


"We're just two lost souls swimming in a fish bowl" (Wish You Were Here)
#8
BassDaddy
Max Output Level: -33 dBFS
  • Total Posts : 4232
  • Joined: 2012/12/31 13:55:58
  • Location: I'm an American. From America!
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 11:47:47 (permalink) ☄ Helpfulby bapu 2015/05/22 11:57:17
I really feel for Bapu feeling for...BBBBBBBlah blah blah

It's Bass, not Bass.
i7 2700K, 16GB DDR3, 2 SSD sample drives and OS drive, HDD SATAIII for projects, 2 24" monitors
Focusrite Saffire Pro 24, Focusrite VRM Box, LAVA Lamp, SONAR Platinum 64 bit, Mackie MCU and 1 MCU XT, Akai Advance 49, Windows 10,
Komplete 9 Ultimate, Cakewalk, Toontrack, IK, AAS, XLN, UVI, Air Music Tech, Waves Factory, Sample Tek and Sonivox VSTi's. Overloud, T-Racks, Audio Damage, D16, Nomad Factory, Waves Gold FX 
#9
Mesh
Max Output Level: 0 dBFS
  • Total Posts : 27360
  • Joined: 2009/11/27 14:08:08
  • Location: Online right here!
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 11:55:56 (permalink)
Looks like a minion rush......

Platinum Gaming DAW: AsRock Z77 Overclock Formula
I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
250GB OS SSD : 3TB HDD : 1TB Sample HDD
Win 10 Pro x 64 : NH-D14 CPU Cooler 
HIS IceQ  2GB HD 7870
Focusrite Scarlett 2i4
The_Forum_Monkeys
#10
jude77
Max Output Level: -68 dBFS
  • Total Posts : 1146
  • Joined: 2013/08/27 21:31:34
  • Location: South Saturn Delta
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 12:01:43 (permalink)
I had the same problem.  I ended up importing every folder one at a time.  Took FOREVER!!  I really wish IK would get their act together one this.
 
Good luck to you.
#11
Mesh
Max Output Level: 0 dBFS
  • Total Posts : 27360
  • Joined: 2009/11/27 14:08:08
  • Location: Online right here!
  • Status: offline
Re: Sample Tank 3 importing problem.... 2015/05/22 12:12:34 (permalink)
jude77
I had the same problem.  I ended up importing every folder one at a time.  Took FOREVER!!  I really wish IK would get their act together one this.
 
Good luck to you.


Hey Jude, don't make it bad.....(sorry, I couldn't resist ).
 
 
Thanks for confirming, I'll start the tedious process this weekend.

Platinum Gaming DAW: AsRock Z77 Overclock Formula
I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
250GB OS SSD : 3TB HDD : 1TB Sample HDD
Win 10 Pro x 64 : NH-D14 CPU Cooler 
HIS IceQ  2GB HD 7870
Focusrite Scarlett 2i4
The_Forum_Monkeys
#12
Jump to:
© 2024 APG vNext Commercial Version 5.1