jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
[Solved] X3 stopped working
I opened several project files on 2 separate hard drives and in all cases, I couldn't get them to output audio. The external insert seems 'broken', i.e. the fx return suddenly has only one option in the dropdown menu: none. So I deleted the external fx from the 2 bus fx window, still no sound. The outputs are assigned properly. Rebooted, no change. The only change has been the installation of Slate Trigger in the fx bin.
post edited by jonnewyork - 2015/05/29 15:42:40
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
savoy
Max Output Level: -88 dBFS
- Total Posts : 148
- Joined: 2015/02/13 09:22:03
- Location: CA quebec
- Status: offline
Re: X3 stopped working
2015/05/28 17:59:47
(permalink)
have you tried remove Slate Trigger in the fx bin?
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: X3 stopped working
2015/05/28 18:06:52
(permalink)
External insert (I believe) is only for use with outboard gear.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/28 18:17:50
(permalink)
I know. It was assigned to an external compressor. It had been working well up until now.
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: X3 stopped working
2015/05/28 18:33:15
(permalink)
Could there be some internal routing option in ST, that emulates a hardware insert of some sort? Do not have ST, so I cannot test. Best of luck.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/28 18:34:07
(permalink)
savoy have you tried remove Slate Trigger in the fx bin?
No. I'm not going to, either, until someone tells me how that could be the problem. I didn't install it to not use it.
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: X3 stopped working
2015/05/28 18:40:44
(permalink)
Try to remove, the re - insert, just to pinpoint where the issue lies. If it is ST, or not, then we can look for a solution based on that. Best of luck. Ps. I do not mean uninstall. Just remove from bus to see what happens.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/28 18:46:42
(permalink)
Zargg71 Could there be some internal routing option in ST, that emulates a hardware insert of some sort? Do not have ST, so I cannot test. Best of luck.
I don't think so. If nobody here has a solution I'll have to call Sweetwater tech support in the morning (closed for the night) and see if they can sort it out. One of their techs helped me install it.
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/28 18:56:30
(permalink)
Zargg71 Try to remove, the re - insert, just to pinpoint where the issue lies. If it is ST, or not, then we can look for a solution based on that. Best of luck. Ps. I do not mean uninstall. Just remove from bus to see what happens.
ST isn't in any bus; it's only in audio fx/ VST2.
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: X3 stopped working
2015/05/29 02:04:53
(permalink)
jonnewyork
savoy have you tried remove Slate Trigger in the fx bin?
No. I'm not going to, either, until someone tells me how that could be the problem. I didn't install it to not use it.
Perhaps because you said everything was working until you inserted it in an fx bin. jonneywok
The only change has been the installation of Slate Trigger in the fx bin.
If you aren't prepared to cooperate how do you expect us to help? We need information.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: X3 stopped working
2015/05/29 06:20:49
(permalink)
jonnewyork
ST isn't in any bus; it's only in audio fx/ VST2. I should have said bus or track. The rest is still valid, I think. As mentioned earlier. It is easier to help you, if you try some of the things recommended here. Anyway, best of luck.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
pwalpwal
Max Output Level: -43 dBFS
- Total Posts : 3249
- Joined: 2015/01/17 03:52:50
- Status: offline
Re: X3 stopped working
2015/05/29 06:48:39
(permalink)
is external insert broken when inserted into a new/empty project?
|
JonD
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2003/12/09 11:09:10
- Location: East of Santa Monica
- Status: offline
Re: X3 stopped working
2015/05/29 10:25:29
(permalink)
Create a Restore Point then go back to before the Slate Trigger install. If everything works fine, then there's your answer.
SonarPlat/CWbBL, Win 10 Pro, i7 2600K, Asus P8Z68 Deluxe, 16GB DDR3, Radeon HD5450, TC Electronic Impact Twin, Kawai MP11 Piano, Event ALP Monitors, Beyerdynamic DT770 Pro, Too Many Plugins, My lucky hat.
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/29 12:19:49
(permalink)
pwalpwal is external insert broken when inserted into a new/empty project?
Yes.
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/29 12:26:10
(permalink)
JonD Create a Restore Point then go back to before the Slate Trigger install. If everything works fine, then there's your answer.
Thanks, that worked. But the answer is the same; Sweetwater tech has to sort it out Looking at an existing recent project, the external return insert showed "none" which is not what it was saved at, but the dropdown menu allowed it to be assigned to the full range of existing inputs.
post edited by jonnewyork - 2015/05/29 12:34:03
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
jonnewyork
Max Output Level: -85 dBFS
- Total Posts : 263
- Joined: 2007/02/07 19:38:38
- Status: offline
Re: X3 stopped working
2015/05/29 15:36:53
(permalink)
Got it sorted with Sweetwater tech. Until further notice
Cheers, Jon Win 7 Pro Intel Core i7-3770 @ 3.40 GHz, 3.40 GHz 16 GB RAM 64 bit op sys Lynx Aurora 16 ADC w/ AES16e card
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 2014/09/28 04:20:14
- Location: Norway
- Status: offline
Re: X3 stopped working
2015/05/29 16:16:32
(permalink)
Could you tell us what the issue was?
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
Superpar
Max Output Level: -90 dBFS
- Total Posts : 23
- Joined: 2014/03/23 00:45:44
- Status: offline
Re: X3 stopped working
2015/06/30 03:27:57
(permalink)
Hi all. I'm having quite a bit of trouble trying to add external inserts. I'm using X3 but I haven't been able to find options to add external inserts anywhere in the software. I've read the documentation on the cakewalk site that says the external insert option can be found in the drop down menu from the FX bin, but every time I try this it's not there. Any suggestions? Are external inserts only available in more advanced versions of X3? Is there something in preferences that needs to be enabled? Thanks
|
scook
Forum Host
- Total Posts : 24146
- Joined: 2005/07/27 13:43:57
- Location: TX
- Status: offline
Re: X3 stopped working
2015/06/30 12:58:45
(permalink)
The External Insert plug-in is bundled with X3 Studio and Producer.
|