TTS-1 Not Responding to Key+ During Live Playing

Author
Post
Essentials Only Full Version
Lord Tim
Max Output Level: -74 dBFS
  • Total Posts : 837
  • Joined: 2003/11/10 10:33:43
  • Location: Australia
  • Status: offline
2015/05/31 03:37:04 (permalink)

TTS-1 Not Responding to Key+ During Live Playing

Here's an odd one. Has the TTS-1 been changed or exposed differently in the latest update?
 
I often use TTS-1 as a scratch pad for getting basic ideas down since it's so lightweight and is easy due to it being standard GM. A lot of my guitars a tuned to E flat, and its rudimentary to just do a -1 on the key in the inspector to get it all in tune.
 
I was roughing out a song today and while the key worked as intended during playback, it had no effect whatsoever while I was recording myself playing the notes on my controller. Other synths worked as intended, however.
 
I know TTS-1 could do this before this update.
 
Sure it's rudimentary to just use another synth and copy the MIDI into the TTS-1 track if I really want to use the sounds but it's an odd thing to happen.
 
Is this just local to me, or should I file a bug report?

WWW: www.lord.net.au  FB: www.facebook.com/lordtimofficial
Bandlab: www.bandlab.com/lordtim
 
Cakewalk by Bandlab / DAW: i7 M620 @ 2.67 GHz, 8 GB RAM, Win10 64 Bit [eng], TASCAM US-16x08 @ 5.8ms (22.7ms RTL) ASIO, Behringer UMX61 Keyboard Controller.
#1

6 Replies Related Threads
    Lord Tim
    Max Output Level: -74 dBFS
    • Total Posts : 837
    • Joined: 2003/11/10 10:33:43
    • Location: Australia
    • Status: offline
    Re: TTS-1 Not Responding to Key+ During Live Playing 2015/06/01 09:32:21 (permalink)
    HA! I fear I'm the only person still using TTS-1 judging by the tumbleweeds rolling through this thread right now! 

    WWW: www.lord.net.au  FB: www.facebook.com/lordtimofficial
    Bandlab: www.bandlab.com/lordtim
     
    Cakewalk by Bandlab / DAW: i7 M620 @ 2.67 GHz, 8 GB RAM, Win10 64 Bit [eng], TASCAM US-16x08 @ 5.8ms (22.7ms RTL) ASIO, Behringer UMX61 Keyboard Controller.
    #2
    robert_e_bone
    Moderator
    • Total Posts : 8968
    • Joined: 2007/12/26 22:09:28
    • Location: Palatine, IL
    • Status: offline
    Re: TTS-1 Not Responding to Key+ During Live Playing 2015/06/01 10:26:01 (permalink)
    I'll try to circle back to this in a couple hours, to see what happens on my system, and will post my findings.
     
    Bob Bone
     

    Wisdom is a giant accumulation of "DOH!"
     
    Sonar: Platinum (x64), X3 (x64) 
    Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22
    Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64
    Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others
    MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es
    Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms  
    #3
    mettelus
    Max Output Level: -22 dBFS
    • Total Posts : 5321
    • Joined: 2005/08/05 03:19:25
    • Location: Maryland, USA
    • Status: offline
    Re: TTS-1 Not Responding to Key+ During Live Playing 2015/06/01 10:39:28 (permalink)
    I just created a new project (Everett) and inserted TTS-1, and the "Key+" in the inspector has no control over it (is that what you were seeing?) This may be related to the drum map issue in Everett (no idea honestly).
     
    A workaround (and possibly simpler workflow for you) is there is a "Master Key Shift" in the settings that pop-up when you click the "System" button in TTS-1 itself. For tracks that this will muck up (like drums), you can offset them back (by track) by clicking the box at the top of each TTS-1 channel and adjusting the "Coarse tuning" (lower left) there.
    post edited by mettelus - 2015/06/01 10:45:41

    ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
    #4
    Lord Tim
    Max Output Level: -74 dBFS
    • Total Posts : 837
    • Joined: 2003/11/10 10:33:43
    • Location: Australia
    • Status: offline
    Re: TTS-1 Not Responding to Key+ During Live Playing 2015/06/01 11:24:56 (permalink)
    ^^ A-ha! Yep, exactly what I'm seeing. Cheers for testing it, guys! Looks like a bug. 

    WWW: www.lord.net.au  FB: www.facebook.com/lordtimofficial
    Bandlab: www.bandlab.com/lordtim
     
    Cakewalk by Bandlab / DAW: i7 M620 @ 2.67 GHz, 8 GB RAM, Win10 64 Bit [eng], TASCAM US-16x08 @ 5.8ms (22.7ms RTL) ASIO, Behringer UMX61 Keyboard Controller.
    #5
    bvideo
    Max Output Level: -58 dBFS
    • Total Posts : 1707
    • Joined: 2006/09/02 22:20:02
    • Status: offline
    Re: TTS-1 Not Responding to Key+ During Live Playing 2015/06/01 15:27:05 (permalink)
    Right, external synths and multiple other softsynths work fine. It's odd; doesn't seem like it would be a per-synth function. But it's also that way for me in X2 - i.e. key+ doesn't work for TTS-1 play-thru. Version info says DXi version 1.00, file version 1.0.2.0, if that means anything.
    #6
    robert_e_bone
    Moderator
    • Total Posts : 8968
    • Joined: 2007/12/26 22:09:28
    • Location: Palatine, IL
    • Status: offline
    Re: TTS-1 Not Responding to Key+ During Live Playing 2015/06/01 16:22:37 (permalink)
    Wow, that's interesting that this is happening in X2, as well.  I guess the good news is that this behavior does not appear to be introduced from the latest maintenance drop.
     
    Bob Bone
     

    Wisdom is a giant accumulation of "DOH!"
     
    Sonar: Platinum (x64), X3 (x64) 
    Audio Interfaces: AudioBox 1818VSL, Steinberg UR-22
    Computers: 1) i7-2600 k, 32 GB RAM, Windows 8.1 Pro x64 & 2) AMD A-10 7850 32 GB RAM Windows 10 Pro x64
    Soft Synths: NI Komplete 8 Ultimate, Arturia V Collection, many others
    MIDI Controllers: M-Audio Axiom Pro 61, Keystation 88es
    Settings: 24-Bit, Sample Rate 48k, ASIO Buffer Size 128, Total Round Trip Latency 9.7 ms  
    #7
    Jump to:
    © 2025 APG vNext Commercial Version 5.1