RD9
Max Output Level: -87 dBFS
- Total Posts : 154
- Joined: 2015/04/04 02:51:09
- Status: offline
Drum Map Port/Channel blank [Solved with update]
Hi, I just started having a problem with drum maps. I have used them successfully in X3 and I thought they were working in Platinum as well. Today I loaded a Project and the drums were silent. I noted in the Drum Map that the Port/Channel section was blank. If I reset one of the OutPorts (even to the same device) the Port/Channel became populated properly. I repeated this with both a new Project and my older Projects. It seems constant. Have I setup a wrong preference or something? Thanks
post edited by RD9 - 2015/10/27 18:26:58
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/01 01:43:56
(permalink)
☼ Best Answerby RD9 2015/07/29 00:38:43
In a fix released with Everett, a new bug has been introduced. Until the fix is released there is a workaround. Please see this post for the workaround. http://forum.cakewalk.com/FindPost/3230840Alternatively if you find that a major problem rollback to Dorchester. BTW welcome to the forums.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
RD9
Max Output Level: -87 dBFS
- Total Posts : 154
- Joined: 2015/04/04 02:51:09
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/01 01:53:50
(permalink)
Thanks Mike, So this is a known bug. I see that the answer was already in the forum, albeit buried beneath a large pile of angst! The former posting did not come up in a search.
It is nice to see a fellow "Mexican" on this forum. I live in Melb.
Cheers, Richard
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/01 02:00:52
(permalink)
There's quite a few of us Aussies here. I could tell from your Mexican accent. The forum search is pretty aweful but if you go to Google and preface your search by forum.cakewalk or forum: Cakewalk I can never remember which you get pretty good results. Also a bit of angst as you mention, but it's pretty tame by internet standards and a great lot of useful help to be found. Generally a ice bunch of guys and gals.
post edited by mudgel - 2015/06/01 02:08:53
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 2007/10/08 15:41:17
- Location: Bristol, UK
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/01 03:50:44
(permalink)
FWIW the drum map workaround does NOT work for me.
I can happily trigger notes from within the drum map/prv and they will sound as they should, but with the transport rolling, I get midi activity but no audio.
It's back to Dorchester for me.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
Paul G
Max Output Level: -52 dBFS
- Total Posts : 2334
- Joined: 2004/03/17 21:38:03
- Location: Florida
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/01 10:42:37
(permalink)
I'm going to stay with Dorchester for now. I'm sure a fix is right around the corner. 
|
Wookiee
Rrrrugh arah-ah-woof?
- Total Posts : 13306
- Joined: 2007/01/16 06:19:43
- Location: Akahaocwora - Village Yoh Kay
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/01 12:52:27
(permalink)
Bristol_Jonesey
FWIW the drum map workaround does NOT work for me.
I can happily trigger notes from within the drum map/prv and they will sound as they should, but with the transport rolling, I get midi activity but no audio.
It's back to Dorchester for me.
Just as a matter of interest what work round are you trying Colin?
Life is not about waiting for the storm to pass, it's about learning to dance in the rain.
Karma has a way of finding its own way home.
Primary, i7 8700K 16Gigs Ram, 3x500gb SSD's 2TB Backup HHD Saffire Pro 40. Win 10 64Bit Secondary i7 4790K, 32GB Ram, 500Gb SSD OS/Prog's, 1TB Audio, 1TB Samples HHD AudioBox USB, Win 10 64Bit CbB, Adam's A7x's - Event 20/20's, Arturia V6, Korg Digital Legacy, Softube Modular, Arturia Keylab-88, USB-MidiSport 8x8
|
RD9
Max Output Level: -87 dBFS
- Total Posts : 154
- Joined: 2015/04/04 02:51:09
- Status: offline
Re: Drum Map Port/Channel blank
2015/06/14 18:54:05
(permalink)
In my particular case the issue noted in the original post, Port/Channel section blank, has been fixed in Sonar Platinum Everett Update #1. From what I can tell it may have been something overlooked in Everett 64 bit version. Thanks to all for your rapid support, especially the omniscient Mudgel.
Maybe we could call it "X4e", or would that be too easy!!
Cheers,
R
|