tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 1/22/2015
- Location: Qld, Australia
- Status: offline
Sonar and Automap with Novation Ultranova
Hi Everyone.
Just wondering if any clever person here is using a Novation Ultranova as a controller in Sonar? I tried using automap to do so when it was first released and it was a bit of a nightmare, so I am curious as to whether things have improved since. I thought I would ask if anyone has had any success before I jump down that rabbit hole again:)
Thanks!
Bruce.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Resonant Serpent
Max Output Level: -81 dBFS
- Total Posts : 463
- Joined: 9/26/2014
- Location: Austin, Texas
- Status: offline
Re: Sonar and Automap with Novation Ultranova
July 27, 15 11:23 AM
(permalink)
I have a Faderport and a Novation 25 SL. I can get one, or the other working, but not both at the same time. Automap seems to work well with what little I was able to use it. I have both units working in S1 and Cubase 8, but grew frustrated working it all out in Sonar. Taking a break, then I'll do more research and see if I can get both to run at the same time.
A deep chesty bawl echoes from rimrock to rimrock, rolls down the mountain, and fades into the far blackness of the night. It is an outburst of wild defiant sorrow, and of contempt for all the adversities of the world. - Aldo Leopold
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 1/22/2015
- Location: Qld, Australia
- Status: offline
Re: Sonar and Automap with Novation Ultranova
July 27, 15 11:38 AM
(permalink)
Resonant Serpent
I have a Faderport and a Novation 25 SL. I can get one, or the other working, but not both at the same time. Automap seems to work well with what little I was able to use it. I have both units working in S1 and Cubase 8, but grew frustrated working it all out in Sonar. Taking a break, then I'll do more research and see if I can get both to run at the same time.
Thanks for the response Dale. I am also running a Faderport, so you have answered a question I didn't even know I had! Bruce.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Resonant Serpent
Max Output Level: -81 dBFS
- Total Posts : 463
- Joined: 9/26/2014
- Location: Austin, Texas
- Status: offline
Re: Sonar and Automap with Novation Ultranova
August 02, 15 9:42 PM
(permalink)
I've spent at least a dozen hours trying to get these to work, and neither do it consistently if both are installed. I may give support a call tomorrow or Tuesday to see if they can help.
A deep chesty bawl echoes from rimrock to rimrock, rolls down the mountain, and fades into the far blackness of the night. It is an outburst of wild defiant sorrow, and of contempt for all the adversities of the world. - Aldo Leopold
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 1/22/2015
- Location: Qld, Australia
- Status: offline
Re: Sonar and Automap with Novation Ultranova
August 02, 15 10:00 PM
(permalink)
Yes - I spent a day last week playing with them Dale. Both the Faderport drivers and the Automap plugin seem a bit fragile. I have settled on the Faderport as it sems to work well if left to its own devices. Automap is still very unstable on my system:(
I hope support have some answers for you:)
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Resonant Serpent
Max Output Level: -81 dBFS
- Total Posts : 463
- Joined: 9/26/2014
- Location: Austin, Texas
- Status: offline
Re: Sonar and Automap with Novation Ultranova
August 02, 15 10:09 PM
(permalink)
I'm hoping ACT gets an update. Took me all of 20 mins to set them up in three other daws.
(fingers crossed for tomorrow)
A deep chesty bawl echoes from rimrock to rimrock, rolls down the mountain, and fades into the far blackness of the night. It is an outburst of wild defiant sorrow, and of contempt for all the adversities of the world. - Aldo Leopold
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 9/28/2014
- Location: Norway
- Status: offline
Re: Sonar and Automap with Novation Ultranova
August 03, 15 10:00 AM
(permalink)
Hi. Which version of Automap are you using? I have a Novation Nocturn, that works (for the few things I use it for).
I found that version 4.8 was "the one" that worked for me.
Best of luck.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 1/22/2015
- Location: Qld, Australia
- Status: offline
Re: Sonar and Automap with Novation Ultranova
August 03, 15 12:19 AM
(permalink)
Zargg71
Hi. Which version of Automap are you using? I have a Novation Nocturn, that works (for the few things I use it for).
I found that version 4.8 was "the one" that worked for me.
Best of luck.
Thanks for the tip Ken. I notice in the release notes that is the version that added Sonar support. I will give it a try. Bruce.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|