bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Plug Problems (Solved)
I loose stereo unless I pull out one of my 1/4 in cables half way. Someone told me what causes and how to fix this but I can't remember how. Please help. As you all know I need all the help I can get 
post edited by bayoubill - 2015/07/31 23:50:23
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/29 18:31:15
(permalink)
Oh yeah, I'm talking about my POD X3 left and right outputs
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/29 18:55:57
(permalink)
with both plugged in I only get the right Channel (till I pull the other half way out) .....just sayin
|
Jeff M.
Max Output Level: -80 dBFS
- Total Posts : 541
- Joined: 2012/09/22 03:02:04
- Location: RI, USA
- Status: offline
Re: Plug Problems
2015/07/29 20:15:10
(permalink)
Is the left output a ring ring tip stereo cable?
Platinum 64 RME UCX | Studio Cat Platinum: i7 2700k @ 4.5Ghz | 16Gb DDR3 | Win 7 64Komplete Kontrol S61 Gibson, Jackson, Parker, Suhr, Breedlove, Taylor, Lakland, Peavey, Marshall, Kemper
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/29 23:24:58
(permalink)
no, they are both standard guitar cords
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: Plug Problems
2015/07/30 09:30:18
(permalink)
My guess is the outputs on the device are labeled "L/Mono" and "R". Is that correct?
If so, then the left jack has a switch in it that allows the unit to combine left and right channels into one when only the "L/Mono" jack is used. That switch will only be engaged when the plug is all the way in, so pulling it part way out opens the switch and separates L and R.
I don't know if the jack is defective, a cable is defective or the wrong type, or if it's just the effect you're using. I offer this only as a clue that might lead to an epiphany.
 All else is in doubt, so this is the truth I cling to. My Stuff
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/30 14:16:01
(permalink)
Thanks Dave! The signal is mono when the jack is pulled. I'm suspecting the cable at this point. Today I'll have time to narrow this down
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/31 16:05:47
(permalink)
It's not the cables. I tried to get in touch with tech support but no call back so far. I can only use mono with the POD. Not good
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/31 22:54:41
(permalink)
Tech support called and we went through elimination and found that I didn't check the cables as well as I thought I had. I needed to check both ends and all 4 cables were bad. After my Brother-In-law soldered those and a few others I had everything was back to abbynormal! Four me anywhey WOW TRIPLETS! I've NEVER SEEN 3 BEFORE!!! COOL!!!
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/31 22:54:41
(permalink)
Tech support called and we went through elimination and found that I didn't check the cables as well as I thought I had. I needed to check both ends and all 4 cables were bad. After my Brother-In-law soldered those and a few others I had everything was back to abbynormal! Four me anywhey
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/31 22:54:42
(permalink)
Tech support called and we went through elimination and found that I didn't check the cables as well as I thought I had. I needed to check both ends and all 4 cables were bad. After my Brother-In-law soldered those and a few others I had everything was back to abbynormal! Four me anywhey
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/07/31 23:02:55
(permalink)
There was a delay and 3 posts in one! 
|
bitflipper
01100010 01101001 01110100 01100110 01101100 01101
- Total Posts : 26036
- Joined: 2006/09/17 11:23:23
- Location: Everett, WA USA
- Status: offline
Re: Plug Problems
2015/08/01 07:21:49
(permalink)
Ya know, we do have the smaller version, too:  Just sayin'.
All else is in doubt, so this is the truth I cling to. My Stuff
|
bayoubill
Max Output Level: 0 dBFS
- Total Posts : 10899
- Joined: 2009/04/27 06:11:12
- Location: Shreveport Louisiana
- Status: offline
Re: Plug Problems
2015/08/01 16:47:54
(permalink)
☄ Helpfulby bapu 2015/08/02 11:23:30
I need something that showed my excitement Dave. Now that I think about it I should have posted a donkey head 
|