tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Blast of white noise while opening files
Hi folks.
I have a problem that began a couple of versions ago with Sonar Platinum (I am currently using Foxboro). When I open certain projects I get short blast of white noise on the channels assigned to he main output of Sonar on my soundcard (RME Ultrafex). I know that there was a bug in an earler version that caused this to happen using templates that was apparently fixed.
Heres where it gets a little weird. I have tracked the problem down to projects where I am using Sample Tank 3, but it only happens if the browser is open and docked (on the right of the screen) when the project was previously saved. It will then continue to happen every time that project is opened. If I undock and close the browser and resave the project, the noise will not happen upon reopening.
It doesn't happen to every project, so I can't reliably reproduce it. I just know that once it happens, closing the browser and resaving the project fixes it every time.
No big deal - just wondered if anyone else has ecountered any random blasts of white noise as projects are opening?
Thanks:)
Bruce.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 2003/11/06 14:02:03
- Status: offline
Re: Blast of white noise while opening files
2015/08/05 13:16:49
(permalink)
Is a sample rate being changed somewhere?
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Blast of white noise while opening files
2015/08/05 23:03:53
(permalink)
Thanks for the response Craig. There is no sample rate change - the UFX IS SET to 44.1khz prior to loading the project or template, both of which are also set to 44.1khz.
I suspect the issue may be with Sample Tank 3 being loaded via either a track or project template.
I am just downloading and installing Gloucester to see if that helps. I have noticed in the past that sometimes an update can reset whatever quirky problems have arisen even though they are system specific. Here's hoping:)
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Doktor Avalanche 
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Blast of white noise while opening files
2015/08/05 23:07:58
(permalink)
Run windows update everywhere.
Consider updating your firmware and drivers for your audio interface. Uninstall old drivers and then reboot. If you are on current up to date drivers might be worth reinstalling via the same method.
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Blast of white noise while opening files
2015/08/06 03:53:30
(permalink)
Thanks Doktor Avalanche - windows and all drivers are already up to date. I have also tried a clean install of the RME drivers to no avail.
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Blast of white noise while opening files
2015/08/06 13:21:43
(permalink)
OK probably brings it back to plugins then. One of them is opening the audio Try opening in Sonar safe mode that should rule it out. You can disable all or some problem plugins.
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Blast of white noise while opening files
2015/08/06 21:52:57
(permalink)
As I mentioned I suspect it is Sample Tank 3 Dr Avalanche, but only when it is loaded through a tempate. I can't fathom why closing the Sonar browser and re-saving the projects stops it happening though! The same plugins are still loading.
post edited by tenfoot - 2015/08/06 22:01:07
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|
Doktor Avalanche
Max Output Level: -32.5 dBFS
- Total Posts : 4294
- Joined: 2015/03/26 18:02:02
- Status: offline
Re: Blast of white noise while opening files
2015/08/06 22:06:53
(permalink)
Right, last post was seeing if you could actually rule out if it was actually Ozone. Having said that I'm not sure safe mode will work for templates.
post edited by Doktor Avalanche - 2015/08/06 22:14:11
Sonar Platinum(64 bit),Win 8.1(64 bit),Saffire Pro 40(Firewire),Mix Control = 3.6,Firewire=VIA,Dell Studio XPS 8100(Intel Core i7 CPU 2.93 Ghz/16 Gb),2 x 1TB SSD (Samsung EVO 850),GeForce GTX 460,Yamaha DGX-505 keyboard,Roland A-300PRO,Roland SPD-30 V2,FD-8,Triggera Krigg,Shure SM7B,Yamaha HS5. Rap Pro,Maschine Studio+Komplete 9 Ultimate+Kontrol Z1,Addictive Keys,Waves Silver,Izotope Nectar elements,Overloud Bundle,Geist,Acronis True Image 2015.
|
tenfoot
Max Output Level: -53.5 dBFS
- Total Posts : 2186
- Joined: 2015/01/22 18:12:07
- Location: Qld, Australia
- Status: offline
Re: Blast of white noise while opening files
2015/08/06 22:29:33
(permalink)
Yes - I narrowed it down to ST3 by removing it from the offending projects. It is no deal breaker and easily avoided by closing the browser before saving. Just puzzling! Thanks again for the ideas Dr Avalanche:)
Bruce. Sonar Platinum 2017-09, Studio One 3.5.3, Win 10 x64, Quad core i7, RME Fireface, Behringer X32 Producer, Behringer X32 Rack, Presonus Faderport, Lemure Software Controller (Android), Enttec DMXIS VST lighting controller, Xtempo POK.
|