Dwdave
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 5/28/2015
- Status: offline
Pro channel issue
Hello, I'm a newbie to this forum. I have had sonar for years tho. Just upgraded to platinum. For some reason I cannot get the saturation plugin to fully populate into the channel. I get the header of the saturation knob and then the console emulator. So, it looks like 2 console emulators except one says console emulator and the other says saturation knob. Any thoughts on how I can resolve this?
|
gswitz
Max Output Level: -18.5 dBFS
- Total Posts : 5694
- Joined: 6/16/2007
- Location: Richmond Virginia USA
- Status: offline
Re: Pro channel issue
August 11, 15 10:00 PM
(permalink)
Video driver issue? Do you have the latest video driver installed for your monitor?
StudioCat > I use Windows 10 and Sonar Platinum. I have a touch screen. I make some videos. This one shows how to do a physical loopback on the RME UCX to get many more equalizer nodes.
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 11/6/2003
- Status: offline
Re: Pro channel issue
August 11, 15 10:39 PM
(permalink)
Depends on what version you're migrating from. Start with a VST reset and re-scan (not just a re-scan) and see if that helps. You'll find what you need to do under Preferences > File > VST Settings. Then do as gswitz recommends if the reset/rescan doesn't help.
|
Dwdave
Max Output Level: -90 dBFS
- Total Posts : 5
- Joined: 5/28/2015
- Status: offline
Re: Pro channel issue
August 12, 15 1:20 PM
(permalink)
Thanks guys, I tried both those things and the problem still persists. The console simulator has little to no audio change when turned on as well. There is a new update today so I'm loading that... Not holding my breath that it will work. Is it possible to remove these 2 programs and then re download them?
Thanks again.
Dave
|
Anderton
Max Output Level: 0 dBFS
- Total Posts : 14070
- Joined: 11/6/2003
- Status: offline
Re: Pro channel issue
August 12, 15 4:02 PM
(permalink)
The console emulator effect is very subtle and is meant to be cumulative. If you follow the documentation and put it on all the tracks (like a real mixer), then use quick grouping to enable/bypass, you'll hear a difference.
As to the Saturation module, what happens when you click on the Expand/Collapse symbol?
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 9/14/2007
- Location: Manitou Spgs, Colorado
- Status: offline
Re: Pro channel issue
August 12, 15 4:08 PM
(permalink)
Prochannel modules are stored in C:\Program Files\Cakewalk\Shared Utilities\Internal. You can move/rename them before installing to ensure they get replaced, but I doubt that's the issue. Based on the description, it kind of sounds like you just have the module collapsed; try clicking the expansion triangles at the end of the header. EDIT: cross-posted with Craig.
post edited by brundlefly - August 12, 15 4:16 PM
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
RSMCGUITAR
Max Output Level: -64 dBFS
- Total Posts : 1318
- Joined: 12/27/2014
- Location: Toronto
- Status: offline
Re: Pro channel issue
August 12, 15 4:11 PM
(permalink)
I've had a similar thing happen and found if I either collapsed the prochannel and opened it again or scrolled the module off screen and then back it went away.
|
Kev999
Max Output Level: -36 dBFS
- Total Posts : 3922
- Joined: 5/1/2007
- Location: Victoria, Australia
- Status: offline
Re: Pro channel issue
August 12, 15 4:50 PM
(permalink)
Dwdave
...I get the header of the saturation knob and then the console emulator. So, it looks like 2 console emulators except one says console emulator and the other says saturation knob...
I've seen display weirdness like this when accessing ProChannel via the Track Inspector, but never in Console View. Are you seeing the same thing in both?
SonarPlatinum∞(22.11.0.111)|Mixbus32C(4.3.19)|DigitalPerformer(9.5.1)|Reaper(5.77)FractalDesign:DefineR5|i7-6850k@4.1GHz|16GB@2666MHz-DDR4|MSI:GamingProCarbonX99a|Matrox:M9148(x2)|UAD2solo(6.5.2)|W7Ult-x64-SP1
Audient:iD22+ASP800|KRK:VXT6|+various-outboard-gear|+guitars&basses, etc.
Having fun at work lately
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 9/28/2014
- Location: Norway
- Status: offline
Re: Pro channel issue
August 13, 15 5:34 AM
(permalink)
I have this issue with just the Saturation Knob, only in Console View, only on the second monitor, and only if it set / mounted above the main monitor (which is where I have it). It seems like a display error (in SONAR), as I have had this both in X3e and SPlat (every release), with two different pc's (different graphic cards), both with the latest drivers and updates. Even had a TeamViewer session with one of the nice people from Cakewalk, and they could not figure it out. Everything is working as it should, on my main monitor. I tweak the Saturation Knob in Track View, Inspector (I), Pro Channel.
post edited by Zargg71 - August 13, 15 7:06 AM
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|