KMGuitarSlinger
Max Output Level: -90 dBFS
- Total Posts : 15
- Joined: 11/6/2011
- Status: offline
Old Project with V-Vocal....
Brought up an old project that VVocal was used on just a couple spots. Well, now when I load that project into the current version those few spots where the Vvocal was applied there is no audio. Is there a way to revert it back or revomoe the Vvocal from it si I cam work with that project again?
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 9/28/2014
- Location: Norway
- Status: offline
Re: Old Project with V-Vocal....
September 07, 15 3:10 PM
(permalink)
Hi. Is it no sound when you play the clip, or is it "just the graphics"? Can you right click on it, and recompute the audio picture?
Best of luck.
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
KMGuitarSlinger
Max Output Level: -90 dBFS
- Total Posts : 15
- Joined: 11/6/2011
- Status: offline
Re: Old Project with V-Vocal....
September 07, 15 4:39 PM
(permalink)
Zargg71
Hi. Is it no sound when you play the clip, or is it "just the graphics"? Can you right click on it, and recompute the audio picture?
Best of luck.
No sound.
|
Zargg
Max Output Level: 0 dBFS
- Total Posts : 10666
- Joined: 9/28/2014
- Location: Norway
- Status: offline
Re: Old Project with V-Vocal....
September 07, 15 4:53 PM
(permalink)
Have you tried to look in the audio folder of that project (if you use per project audio folder)? Or maybe do a search for the missing file?
Do you have any backups of that project?
Ken Nilsen ZarggBBZWin 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
|
annifarkle
Max Output Level: -88 dBFS
- Total Posts : 136
- Joined: 1/6/2007
- Location: The Seattle area
- Status: offline
Re: Old Project with V-Vocal....
September 07, 15 7:54 PM
(permalink)
If you don't have V-Vocal in your latest Sonar version you could try opening it in an older Sonar version that V-Vocal works in and select "remove region effect."
|
mettelus
Max Output Level: -22 dBFS
- Total Posts : 5321
- Joined: 8/5/2005
- Location: Maryland, USA
- Status: offline
Re: Old Project with V-Vocal....
September 07, 15 8:04 PM
(permalink)
Which version was it worked in? The original audio file may be in your global audio folder (or in the project audio folder if a new enough version). Finding it may be a hurdle (if you didn't name the track/clip), but can order contents by date and move backward from the last project file date. The actual wav file should bear a very similar name to the clip/track name in the project with the missing chunks. (One method)
VV will open in newer versions of SONAR, but requires a basic installation (via advanced install options) of the actual SONAR program (X2 or earlier). (Another method)
ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
|
TwangGuru
Max Output Level: -90 dBFS
- Total Posts : 39
- Joined: 11/15/2003
- Location: Austin, TX
- Status: offline
Re: Old Project with V-Vocal....
September 07, 15 10:56 PM
(permalink)
I got V-Vocal back by reinstalling Sonar X2.
|