AnsweredI got my UR44 but has some issues?

Author
Post
Essentials Only Full Version
cankirca
Max Output Level: -90 dBFS
  • Total Posts : 36
  • Joined: 2015/06/09 13:15:50
  • Status: offline
2015/09/23 10:46:37 (permalink)

I got my UR44 but has some issues?

  Hello,
I'm a blind musician, bought an UR44 yesterday. Now I have some questions and issues about unit;
1. Is it possible to disable/mute monitoring via monitors/speakers that insorted to back outputs? Hetphone is enough for me for monitoring.
2. When I decrease microphone volume to 0, I can hear my microphone. an other example, when I using line on the front panel  with disabling fantom power, I can hear sound comes from line cable as well. 3. I insorting balanced line-in cables to the back panel and try to record music via my daw. If I can't use microphone, everything works well. While I talk/record something with microphone, the sound that comes from line automatically decreasing until mute the microphone.
P.S: The DSP windows application not accessible with screen readers, so I can't check/change anything on there.
System/hardware details: Windows7-64bit, Steinberg UR44, CakeWalk Sonar 8.5 and X3, MXL Condenser microphones.
post edited by cankirca - 2015/09/23 10:56:19
#1
See best answer

4 Replies Related Threads
    ampfixer
    Max Output Level: -20 dBFS
    • Total Posts : 5508
    • Joined: 2010/12/12 20:11:50
    • Location: Ontario
    • Status: offline
    Re: I got my UR44 but has some issues? 2015/09/23 12:22:37 (permalink) ☼ Best Answerby cankirca 2015/09/23 12:48:23
    I can't help with everything but I can help on a couple things. The headphone jacks are completely independent from the output control. Just turn down the output and there will only be sound in the headphones.
     
    You may need someone to help you with the Mixer and DSP configuration. I was hearing reverb on everything and found that the problem came from the DSP being active. You have to set it up from the screen that you can't access. I only had to do this once.
     
    If there is bleed on the inputs you can shut them off in Sonar. I hope this is some help for you.

    Regards, John 
     I want to make it clear that I am an Eedjit. I have no direct, or indirect, knowledge of business, the music industry, forum threads or the meaning of life. I know about amps.
    WIN 10 Pro X64, I7-3770k 16 gigs, ASUS Z77 pro, AMD 7950 3 gig,  Steinberg UR44, A-Pro 500, Sonar Platinum, KRK Rokit 6 
    #2
    cankirca
    Max Output Level: -90 dBFS
    • Total Posts : 36
    • Joined: 2015/06/09 13:15:50
    • Status: offline
    Re: I got my UR44 but has some issues? 2015/09/23 12:46:55 (permalink)
    Hello,

    First of all, thanks for your reply.

    1. When I want to listen my record via studio monitör, unfortunatly I'm hearing my microphone as well, because of monitoring function. I'm trying to decrease the volume of the mic; but I'm hearing alittle.
    2. I'm disabling inputs from Sonar; but I'm hearing voice from the microphone via monitör or hetphone.

    Thanks again,
    regards.
    #3
    Rimshot
    Max Output Level: -29 dBFS
    • Total Posts : 4625
    • Joined: 2010/12/09 12:51:08
    • Location: California
    • Status: offline
    Re: I got my UR44 but has some issues? 2015/09/23 15:40:25 (permalink)
    There is a fader to the left of the master volume fader in the UR44 Control Panel. 
    If it is set high (DAW), you will be listening to Sonar.
    If it is low, you will be listening through the UR44.
    You should try monitoring just through your DAW.
    post edited by Rimshot - 2015/09/23 17:27:38

    Rimshot 

    Sonar Platinum 64 (Lifer), Studio One V3.5, Notion 6, Steinberg UR44, Zoom R24, Purrrfect Audio Pro Studio DAW (Case: Silent Mid Tower, Power Supply: 600w quiet, Haswell CPU: i7 4790k @ 4.4GHz (8 threads), RAM: 16GB DDR3/1600 
    , OS drive: 1TB HD, Audio drive: 1TB HD), Windows 10 x64 Anniversary, Equator D5 monitors, Faderport, FP8, Akai MPK261
    #4
    cankirca
    Max Output Level: -90 dBFS
    • Total Posts : 36
    • Joined: 2015/06/09 13:15:50
    • Status: offline
    Re: I got my UR44 but has some issues? 2015/09/24 15:15:10 (permalink)
    Hi Friends,

    Although I set microphone input level to 0 (turn-off), I can hear a little sound from mic.

    Do you have any suggestion for this issue?

    Thanks in advance.
    #5
    Jump to:
    © 2024 APG vNext Commercial Version 5.1