Re: pop-funk feedback please
2015/10/10 09:26:34
(permalink)
Not my genre but I will give you a pointer or two on the mix.
The vocals are too far out front and need to come back so you can hear the other elements. It appears that the drums may be too quite also.
I would start by muting the vocal and everything except the bass and the drums. then set the mix between the bass and drums first. Then start adding the other elements back in and work with panning to find a place in the sound stage for everything.
Then bring your vocals back in and lower the volume so they just peek out over the rest of the music.
you may find the voice is hard to get right. If that happens use the analyzer to look at the frequency range the vocals are in. perhaps the 350hz range.
Once you have identified where the vocal is in the spectrum use the analyzer on each of the other tracks to see which are conflicting. Then use an eq to gently reduce that frequency in the conflicting tracks.
Hope this helps.
i7-3770k OC at 4.5Ghz, asus p8z77-m, 16g g.skill aries 1600 c9 ram, Noctua d-14 cooler, RME HDSPe Raydat, Motu FastLane, Nvidea GTX 980 ti 6G, windows 7 and 8.1 pro x64. Sonar Platinum and x3e currently installed
My Music My YouTube