clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Lexington Glitch?
I was playing around with some HD500X patches this morning and noticed that the guitar audio was passing through to the master bus even though I had the inputs muted, the track muted, and the input echo turned off. I finally found the audio coming through my frozen EZ Keys track. (EZKeys was on track 4 the guitar was track 15). Also, I've tried everything and can't get the track to un-freeze. I bounced the audio of EZ Keys to a new track and muted track 4. Strange. Any ideas?
post edited by clintmartin - December 25, 15 1:29 PM
|
ChrisX
Max Output Level: -88 dBFS
- Total Posts : 128
- Joined: 7/2/2013
- Location: Philadelphia PA.
- Status: offline
Re: Lexington Glitch?
December 25, 15 8:23 PM
(permalink)
I have something similar .... I have a project where I have a few tracks that have their outputs on a stereo bus with a sidechain compressor on it. There is a track with a kick on it (and output to the master) that I sent pre fader to trigger the bus compressor. There two weird things happened : when I muted the kick track the sound still came out through the master bus and only stopped when I disabled the send. The other thing is that even if the send is pre fader it only triggers the compressor if the volume fader is open, or there is a valid output to the master....It is an older project before the actual update and the new projects seems ok.
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Re: Lexington Glitch?
December 26, 15 9:21 PM
(permalink)
This could be a corrupted project which may or may not have been Lexington related.
I can't pan anything now. Under the pan knob it says, pan 0% C+. Under the volume knob it says, 0.0 +.
I can turn the pan and volume knobs, but the pan doesn't so anything.
My EZ Keys track is frozen it will not un-freeze.
My other projects seem fine.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Lexington Glitch?
December 26, 15 9:37 PM
(permalink)
☄ Helpfulby clintmartin December 26, 15 11:24 PM
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Re: Lexington Glitch?
December 26, 15 11:14 PM
(permalink)
Thanks, once again scook. I still don't know why my EZ Keys track won't un-freeze, but it's a simple part. I just bounced the audio and deleted that track...problem solved!
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Lexington Glitch?
December 26, 15 11:39 PM
(permalink)
Was EZ Keys an instrument tack or audio+MIDI?
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Re: Lexington Glitch?
December 27, 15 0:36 PM
(permalink)
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Lexington Glitch?
December 27, 15 0:51 PM
(permalink)
Is it possible the audio tracks were recorded and not frozen? This has been available since Ipswich.
FWIW, there is no default keyboard shortcut for offset mode in Platinum. Is is possible you imported settings from a previous version?
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Re: Lexington Glitch?
December 27, 15 9:20 AM
(permalink)
I'm not sure what happened. It's pretty strange. On the track the freeze button was greyed out, but in the browser it looked normal. Neither worked. Luckily the part was finished and very simple, so bouncing the audio will work for me. I haven't seen anyone else report this...so maybe it's just with me or my system.
|
scook
Forum Host
- Total Posts : 24146
- Joined: 7/27/2005
- Location: TX
- Status: offline
Re: Lexington Glitch?
December 27, 15 10:38 AM
(permalink)
Do you put EZ Keys tracks in a folder and arm using the record button on the folder?
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Re: Lexington Glitch?
December 27, 15 2:43 PM
(permalink)
I just did the simple midi track option. That's usually good enough for me.
|
Bristol_Jonesey
Max Output Level: 0 dBFS
- Total Posts : 16775
- Joined: 10/8/2007
- Location: Bristol, UK
- Status: offline
Re: Lexington Glitch?
December 28, 15 11:58 AM
(permalink)
clintmartin
I'm not sure what happened. It's pretty strange. On the track the freeze button was greyed out, but in the browser it looked normal. Neither worked. Luckily the part was finished and very simple, so bouncing the audio will work for me. I haven't seen anyone else report this...so maybe it's just with me or my system.
I don't know if this is related, but a project I'm currently working on displayed similar inconsistencies with regards to the Freeze button. All of the freeze buttons in the synth rack were greyed out, but were normal in track view. I found that if I simply hit solo or mute on & off for each track, the freeze option then became available in the rack.
CbB, Platinum, 64 bit throughoutCustom built i7 3930, 32Gb RAM, 2 x 1Tb Internal HDD, 1 x 1TB system SSD (Win 7), 1 x 500Gb system SSD (Win 10), 2 x 1Tb External HDD's, Dual boot Win 7 & Win 10 64 Bit, Saffire Pro 26, ISA One, Adam P11A,
|
clintmartin
Max Output Level: -36.5 dBFS
- Total Posts : 3893
- Joined: 10/11/2009
- Location: Fort Smith, AR
- Status: offline
Re: Lexington Glitch?
December 29, 15 2:53 AM
(permalink)
hmmm, mine was the other way around, but I'll try that if it comes up again. Hopefully it's a minor glitch that doesn't come up again.
|